Add qemu 2.4.0

[kvmfornfv.git] / qemu / roms / u-boot / include / configs / davinci_dm355leopard.h

diff --git a/qemu/roms/u-boot/include/configs/davinci_dm355leopard.h b/qemu/roms/u-boot/include/configs/davinci_dm355leopard.h
new file mode 100644 (file)
index 0000000..5188fdf
--- /dev/null
+++ b/qemu/roms/u-boot/include/configs/davinci_dm355leopard.h
@@ -0,0 +1,149 @@
+/*
+ * Copyright (C) 2009 Texas Instruments Incorporated
+ *
+ * SPDX-License-Identifier:    GPL-2.0+
+ */
+
+#ifndef __CONFIG_H
+#define __CONFIG_H
+
+#define DAVINCI_DM355LEOPARD
+
+#define CONFIG_SKIP_LOWLEVEL_INIT      /* U-Boot is a 3rd stage loader */
+#define CONFIG_SYS_NO_FLASH            /* that is, no *NOR* flash */
+#define CONFIG_SYS_CONSOLE_INFO_QUIET
+
+/* SoC Configuration */
+#define CONFIG_ARM926EJS                               /* arm926ejs CPU */
+#define CONFIG_SYS_TIMERBASE           0x01c21400      /* use timer 0 */
+#define CONFIG_SYS_HZ_CLOCK            24000000        /* timer0 freq */
+#define CONFIG_SOC_DM355                               /* DM355 based board */
+
+/* Memory Info */
+#define CONFIG_NR_DRAM_BANKS           1
+#define PHYS_SDRAM_1                   0x80000000
+#define PHYS_SDRAM_1_SIZE              (128 << 20)     /* 128 MiB */
+
+/* Serial Driver info: UART0 for console  */
+#define CONFIG_SYS_NS16550
+#define CONFIG_SYS_NS16550_SERIAL
+#define CONFIG_SYS_NS16550_REG_SIZE    -4
+#define CONFIG_SYS_NS16550_COM1                0x01c20000
+#define CONFIG_SYS_NS16550_CLK         CONFIG_SYS_HZ_CLOCK
+#define CONFIG_CONS_INDEX              1
+#define CONFIG_BAUDRATE                        115200
+
+/* Ethernet:  external DM9000 */
+#define CONFIG_DRIVER_DM9000           1
+#define CONFIG_DM9000_BASE             0x04000000
+#define DM9000_IO                      CONFIG_DM9000_BASE
+#define DM9000_DATA                    (CONFIG_DM9000_BASE + 16)
+
+/* I2C */
+#define CONFIG_SYS_I2C
+#define CONFIG_SYS_I2C_DAVINCI
+#define CONFIG_SYS_DAVINCI_I2C_SPEED           400000
+#define CONFIG_SYS_DAVINCI_I2C_SLAVE           0x10
+
+/* NAND */
+#define CONFIG_NAND_DAVINCI
+#define CONFIG_SYS_NAND_CS             2
+#define CONFIG_SYS_NAND_USE_FLASH_BBT
+#define CONFIG_SYS_NAND_HW_ECC
+
+#define CONFIG_SYS_NAND_BASE_LIST      { 0x02000000, }
+#define CONFIG_SYS_MAX_NAND_DEVICE     1
+
+/* U-Boot command configuration */
+#include <config_cmd_default.h>
+
+#undef CONFIG_CMD_BDI
+#undef CONFIG_CMD_FLASH
+#undef CONFIG_CMD_FPGA
+#undef CONFIG_CMD_SETGETDCR
+
+#define CONFIG_CMD_ASKENV
+#define CONFIG_CMD_DHCP
+#define CONFIG_CMD_I2C
+#define CONFIG_CMD_PING
+#define CONFIG_CMD_SAVES
+
+#ifdef CONFIG_CMD_BDI
+#define CONFIG_CLOCKS
+#endif
+
+#ifdef CONFIG_NAND_DAVINCI
+#define CONFIG_CMD_MTDPARTS
+#define CONFIG_MTD_PARTITIONS
+#define CONFIG_MTD_DEVICE
+#define CONFIG_CMD_NAND
+#define CONFIG_CMD_UBI
+#define CONFIG_RBTREE
+#endif
+
+#define CONFIG_CRC32_VERIFY
+#define CONFIG_MX_CYCLIC
+
+/* U-Boot general configuration */
+#define CONFIG_BOOTFILE                "uImage"        /* Boot file name */
+#define CONFIG_SYS_PROMPT      "DM355 LEOPARD # "
+#define CONFIG_SYS_CBSIZE      1024            /* Console I/O Buffer Size  */
+#define CONFIG_SYS_PBSIZE                      /* Print buffer size */ \
+               (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16)
+#define CONFIG_SYS_MAXARGS     16              /* max number of command args */
+#define CONFIG_SYS_HUSH_PARSER
+#define CONFIG_SYS_LONGHELP
+
+#ifdef CONFIG_NAND_DAVINCI
+#define CONFIG_ENV_SIZE                (256 << 10)     /* 256 KiB */
+#define CONFIG_ENV_IS_IN_NAND
+#define CONFIG_ENV_OFFSET      0x3C0000
+#undef CONFIG_ENV_IS_IN_FLASH
+#define CONFIG_ENV_OVERWRITE
+#endif
+
+#define CONFIG_BOOTDELAY       3
+#define CONFIG_BOOTCOMMAND     "dhcp;bootm"
+#define CONFIG_BOOTARGS                \
+                       "console=ttyS0,115200n8 " \
+                       "root=/dev/mmcblk0p1 rootwait rootfstype=ext3 ro"
+
+#define CONFIG_CMDLINE_EDITING
+#define CONFIG_VERSION_VARIABLE
+#define CONFIG_TIMESTAMP
+
+#define CONFIG_NET_RETRY_COUNT 10
+
+/* U-Boot memory configuration */
+#define CONFIG_SYS_MALLOC_LEN          (1 << 20)       /* 1 MiB */
+#define CONFIG_SYS_MEMTEST_START       0x87000000      /* physical address */
+#define CONFIG_SYS_MEMTEST_END         0x88000000      /* test 16MB RAM */
+
+/* Linux interfacing */
+#define CONFIG_CMDLINE_TAG
+#define CONFIG_SETUP_MEMORY_TAGS
+#define CONFIG_SYS_BARGSIZE    1024                    /* bootarg Size */
+#define CONFIG_SYS_LOAD_ADDR   0x80700000              /* kernel address */
+
+#define MTDIDS_DEFAULT         "nand0=davinci_nand.0"
+
+#ifdef CONFIG_SYS_NAND_LARGEPAGE
+#define PART_BOOT              "2m(bootloader)ro,"
+#else
+/* Assume 16K erase blocks; allow a few bad ones. */
+#define PART_BOOT              "512k(bootloader)ro,"
+#endif
+
+#define PART_KERNEL            "4m(kernel),"   /* kernel + initramfs */
+#define PART_REST              "-(filesystem)"
+
+#define MTDPARTS_DEFAULT       \
+       "mtdparts=davinci_nand.0:" PART_BOOT PART_KERNEL PART_REST
+
+#define CONFIG_MAX_RAM_BANK_SIZE       (256 << 20)     /* 256 MB */
+
+#define CONFIG_SYS_SDRAM_BASE          PHYS_SDRAM_1
+#define CONFIG_SYS_INIT_SP_ADDR                \
+       (CONFIG_SYS_SDRAM_BASE + 0x1000 - GENERATED_GBL_DATA_SIZE)
+
+#endif /* __CONFIG_H */