Add qemu 2.4.0
[kvmfornfv.git] / qemu / roms / u-boot / include / configs / canmb.h
diff --git a/qemu/roms/u-boot/include/configs/canmb.h b/qemu/roms/u-boot/include/configs/canmb.h
new file mode 100644 (file)
index 0000000..c901793
--- /dev/null
@@ -0,0 +1,214 @@
+/*
+ * (C) Copyright 2005
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
+ * SPDX-License-Identifier:    GPL-2.0+
+ */
+
+#ifndef __CONFIG_H
+#define __CONFIG_H
+
+/*
+ * High Level Configuration Options
+ * (easy to change)
+ */
+
+#define CONFIG_MPC5200         1       /* This is a MPC5200 CPU */
+#define CONFIG_CANMB           1       /* ... on canmb board - we need this for FEC.C */
+
+/*
+ * allowed and functional CONFIG_SYS_TEXT_BASE values:
+ * 0xfe000000  low boot at 0x00000100 (default board setting)
+ * 0x00100000  RAM load and test
+ */
+#define        CONFIG_SYS_TEXT_BASE    0xFE000000
+
+#define CONFIG_SYS_MPC5XXX_CLKIN       33000000 /* ... running at 33.000000MHz */
+
+#define CONFIG_BOARD_EARLY_INIT_R
+
+#define CONFIG_HIGH_BATS       1       /* High BATs supported */
+
+/*
+ * Serial console configuration
+ */
+#define CONFIG_PSC_CONSOLE     1       /* console is on PSC1 */
+#define CONFIG_BAUDRATE                115200  /* ... at 115200 bps */
+#define CONFIG_SYS_BAUDRATE_TABLE      { 9600, 19200, 38400, 57600, 115200, 230400 }
+
+
+/*
+ * BOOTP options
+ */
+#define CONFIG_BOOTP_BOOTFILESIZE
+#define CONFIG_BOOTP_BOOTPATH
+#define CONFIG_BOOTP_GATEWAY
+#define CONFIG_BOOTP_HOSTNAME
+
+
+/*
+ * Command line configuration.
+ */
+#include <config_cmd_default.h>
+
+#define CONFIG_CMD_ASKENV
+#define CONFIG_CMD_DATE
+#define CONFIG_CMD_DHCP
+#define CONFIG_CMD_IMMAP
+#define CONFIG_CMD_MII
+#define CONFIG_CMD_NFS
+#define CONFIG_CMD_REGINFO
+#define CONFIG_CMD_SNTP
+
+
+/*
+ * MUST be low boot - HIGHBOOT is not supported anymore
+ */
+#if (CONFIG_SYS_TEXT_BASE == 0xFE000000)               /* Boot low with 32 MB Flash */
+#   define CONFIG_SYS_LOWBOOT          1
+#   define CONFIG_SYS_LOWBOOT16        1
+#else
+#   error "CONFIG_SYS_TEXT_BASE must be 0xFE000000"
+#endif
+
+/*
+ * Autobooting
+ */
+#define CONFIG_BOOTDELAY       5       /* autoboot after 5 seconds */
+
+#define CONFIG_PREBOOT "echo;" \
+       "echo Type \\\"run flash_nfs\\\" to mount root filesystem over NFS;" \
+       "echo"
+
+#undef CONFIG_BOOTARGS
+
+#define        CONFIG_EXTRA_ENV_SETTINGS                                       \
+       "netdev=eth0\0"                                                 \
+       "nfsargs=setenv bootargs root=/dev/nfs rw "                     \
+               "nfsroot=${serverip}:${rootpath}\0"                     \
+       "ramargs=setenv bootargs root=/dev/ram rw\0"                    \
+       "addip=setenv bootargs ${bootargs} "                            \
+               "ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}"      \
+               ":${hostname}:${netdev}:off panic=1\0"                  \
+       "flash_nfs=run nfsargs addip;"                                  \
+               "bootm ${kernel_addr}\0"                                \
+       "flash_self=run ramargs addip;"                                 \
+               "bootm ${kernel_addr} ${ramdisk_addr}\0"                \
+       "net_nfs=tftp 200000 ${bootfile};run nfsargs addip;bootm\0"     \
+       "rootpath=/opt/eldk/ppc_6xx\0"                                  \
+       "bootfile=/tftpboot/canmb/uImage\0"                             \
+       ""
+
+#define CONFIG_BOOTCOMMAND     "run flash_self"
+
+/*
+ * IPB Bus clocking configuration.
+ */
+#undef CONFIG_SYS_IPBCLK_EQUALS_XLBCLK         /* define for 133MHz speed */
+
+/*
+ * Flash configuration, expect one 16 Megabyte Bank at most
+ */
+#define CONFIG_SYS_FLASH_BASE          0xFE000000
+#define CONFIG_SYS_FLASH_SIZE          0x02000000
+#define CONFIG_SYS_MAX_FLASH_BANKS     1       /* max num of memory banks      */
+#define CONFIG_SYS_MAX_FLASH_SECT      256     /* max num of sects on one chip */
+
+#define CONFIG_SYS_FLASH_ERASE_TOUT    240000  /* Flash Erase Timeout (in ms)  */
+#define CONFIG_SYS_FLASH_WRITE_TOUT    500     /* Flash Write Timeout (in ms)  */
+
+#define CONFIG_FLASH_CFI_DRIVER
+#define CONFIG_SYS_FLASH_CFI
+#define CONFIG_SYS_FLASH_EMPTY_INFO
+
+/*
+ * Environment settings
+ */
+#define CONFIG_ENV_IS_IN_FLASH 1
+#define CONFIG_ENV_OFFSET              (2*128*1024)
+#define CONFIG_ENV_SIZE                0x2000
+#define CONFIG_ENV_SECT_SIZE       (128*1024)
+
+/*
+ * Memory map
+ *
+ * Warning!!! with the current BestComm Task, MBAR MUST BE set to 0xf0000000
+ */
+#define CONFIG_SYS_MBAR                        0xf0000000      /* DO NOT CHANGE this */
+#define CONFIG_SYS_SDRAM_BASE          0x00000000
+#define CONFIG_SYS_DEFAULT_MBAR        0x80000000
+
+/* Use SRAM until RAM will be available */
+#define CONFIG_SYS_INIT_RAM_ADDR       MPC5XXX_SRAM
+#define CONFIG_SYS_INIT_RAM_SIZE       MPC5XXX_SRAM_SIZE       /* Size of used area in DPRAM */
+
+
+#define CONFIG_SYS_GBL_DATA_OFFSET     (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
+#define CONFIG_SYS_INIT_SP_OFFSET      CONFIG_SYS_GBL_DATA_OFFSET
+
+#define CONFIG_SYS_MONITOR_BASE    CONFIG_SYS_TEXT_BASE
+#if (CONFIG_SYS_MONITOR_BASE < CONFIG_SYS_FLASH_BASE)
+#   define CONFIG_SYS_RAMBOOT          1
+#endif
+
+#define CONFIG_SYS_MONITOR_LEN         (256 << 10)     /* Reserve 256 kB for Monitor   */
+#define CONFIG_SYS_MALLOC_LEN          (128 << 10)     /* Reserve 128 kB for malloc()  */
+#define CONFIG_SYS_BOOTMAPSZ           (8 << 20)       /* Initial Memory map for Linux */
+
+/*
+ * Ethernet configuration
+ */
+#define CONFIG_MPC5xxx_FEC     1
+#define CONFIG_MPC5xxx_FEC_MII100
+#define        CONFIG_PHY_ADDR         0x0
+/*
+ * GPIO configuration:
+ * PSC1,2,3 predefined as UART
+ * PCI disabled
+ * Ethernet 100 with MD
+ */
+#define CONFIG_SYS_GPS_PORT_CONFIG     0x00058444
+
+/*
+ * Miscellaneous configurable options
+ */
+#define CONFIG_SYS_LONGHELP                    /* undef to save memory     */
+#if defined(CONFIG_CMD_KGDB)
+#  define CONFIG_SYS_CBSIZE            1024    /* Console I/O Buffer Size  */
+#else
+#  define CONFIG_SYS_CBSIZE            256     /* Console I/O Buffer Size  */
+#endif
+#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16)     /* Print Buffer Size */
+#define CONFIG_SYS_MAXARGS             16              /* max number of command args   */
+#define CONFIG_SYS_BARGSIZE            CONFIG_SYS_CBSIZE       /* Boot Argument Buffer Size    */
+
+#define CONFIG_SYS_MEMTEST_START       0x00100000      /* memtest works on */
+#define CONFIG_SYS_MEMTEST_END         0x01f00000      /* 1 ... 31 MB in DRAM  */
+
+#define CONFIG_SYS_LOAD_ADDR           0x200000        /* default load address */
+
+#define CONFIG_RTC_MPC5200     1       /* use internal MPC5200 RTC */
+
+#define CONFIG_SYS_CACHELINE_SIZE      32      /* For MPC5xxx CPUs */
+#if defined(CONFIG_CMD_KGDB)
+#  define CONFIG_SYS_CACHELINE_SHIFT   5       /* log base 2 of the above value */
+#endif
+
+/*
+ * Various low-level settings
+ */
+#define CONFIG_SYS_HID0_INIT           HID0_ICE | HID0_ICFI
+#define CONFIG_SYS_HID0_FINAL          HID0_ICE
+
+#define CONFIG_SYS_BOOTCS_START        CONFIG_SYS_FLASH_BASE
+#define CONFIG_SYS_BOOTCS_SIZE         CONFIG_SYS_FLASH_SIZE
+#define CONFIG_SYS_BOOTCS_CFG          0x00047D01
+#define CONFIG_SYS_CS0_START           CONFIG_SYS_FLASH_BASE
+#define CONFIG_SYS_CS0_SIZE            CONFIG_SYS_FLASH_SIZE
+
+#define CONFIG_SYS_CS_BURST            0x00000000
+#define CONFIG_SYS_CS_DEADCYCLE        0x33333333
+
+#define CONFIG_SYS_RESET_ADDRESS       0x7f000000
+
+#endif /* __CONFIG_H */