Add qemu 2.4.0

[kvmfornfv.git] / qemu / roms / u-boot / include / configs / bg0900.h

diff --git a/qemu/roms/u-boot/include/configs/bg0900.h b/qemu/roms/u-boot/include/configs/bg0900.h
new file mode 100644 (file)
index 0000000..507d972
--- /dev/null
+++ b/qemu/roms/u-boot/include/configs/bg0900.h
@@ -0,0 +1,97 @@
+/*
+ * Copyright (C) 2013 Marek Vasut <marex@denx.de>
+ *
+ * SPDX-License-Identifier:    GPL-2.0+
+ */
+#ifndef __CONFIGS_BG0900_H__
+#define __CONFIGS_BG0900_H__
+
+/* System configurations */
+#define CONFIG_MX28                            /* i.MX28 SoC */
+
+/* U-Boot Commands */
+#define CONFIG_SYS_NO_FLASH
+#include <config_cmd_default.h>
+#define CONFIG_DISPLAY_CPUINFO
+#define CONFIG_DOS_PARTITION
+
+#define CONFIG_CMD_BOOTZ
+#define CONFIG_CMD_CACHE
+#define CONFIG_CMD_DHCP
+#define CONFIG_CMD_GPIO
+#define CONFIG_CMD_MII
+#define CONFIG_CMD_NAND
+#define CONFIG_CMD_NAND_TRIMFFS
+#define CONFIG_CMD_NET
+#define CONFIG_CMD_NFS
+#define CONFIG_CMD_PING
+#define CONFIG_CMD_SAVEENV
+#define CONFIG_CMD_SETEXPR
+#define CONFIG_CMD_SF
+#define CONFIG_CMD_SPI
+
+/* Memory configuration */
+#define CONFIG_NR_DRAM_BANKS           1               /* 1 bank of DRAM */
+#define PHYS_SDRAM_1                   0x40000000      /* Base address */
+#define PHYS_SDRAM_1_SIZE              0x10000000      /* Max 256 MB RAM */
+#define CONFIG_SYS_SDRAM_BASE          PHYS_SDRAM_1
+
+/* Environment */
+#define CONFIG_ENV_SIZE                        (16 * 1024)
+#define CONFIG_ENV_OVERWRITE
+#define CONFIG_ENV_IS_NOWHERE
+
+/* FEC Ethernet on SoC */
+#ifdef CONFIG_CMD_NET
+#define CONFIG_FEC_MXC
+#define CONFIG_NET_MULTI
+#endif
+
+/* SPI */
+#ifdef CONFIG_CMD_SPI
+#define CONFIG_DEFAULT_SPI_BUS         2
+#define CONFIG_DEFAULT_SPI_CS          0
+#define CONFIG_DEFAULT_SPI_MODE                SPI_MODE_0
+
+/* SPI FLASH */
+#ifdef CONFIG_CMD_SF
+#define CONFIG_SPI_FLASH
+#define CONFIG_SPI_FLASH_BAR
+#define CONFIG_SPI_FLASH_STMICRO
+#define CONFIG_SF_DEFAULT_BUS          2
+#define CONFIG_SF_DEFAULT_CS           0
+#define CONFIG_SF_DEFAULT_SPEED                40000000
+#define CONFIG_SF_DEFAULT_MODE         SPI_MODE_0
+
+#define CONFIG_ENV_SPI_BUS             2
+#define CONFIG_ENV_SPI_CS              0
+#define CONFIG_ENV_SPI_MAX_HZ          40000000
+#define CONFIG_ENV_SPI_MODE            SPI_MODE_0
+#endif
+
+#endif
+
+/* Boot Linux */
+#define CONFIG_BOOTDELAY       3
+#define CONFIG_BOOTFILE                "uImage"
+#define CONFIG_BOOTARGS                "console=ttyAMA0,115200"
+#define CONFIG_BOOTCOMMAND     "bootm"
+#define CONFIG_LOADADDR                0x42000000
+#define CONFIG_SYS_LOAD_ADDR   CONFIG_LOADADDR
+
+/* Extra Environment */
+#define CONFIG_EXTRA_ENV_SETTINGS                                      \
+       "update_spi_firmware_filename=u-boot.sb\0"                      \
+       "update_spi_firmware_maxsz=0x80000\0"                           \
+       "update_spi_firmware="  /* Update the SPI flash firmware */     \
+               "if sf probe 2:0 ; then "                               \
+               "if tftp ${update_spi_firmware_filename} ; then "       \
+               "sf erase 0x0 +${filesize} ; "                          \
+               "sf write ${loadaddr} 0x0 ${filesize} ; "               \
+               "fi ; "                                                 \
+               "fi\0"
+
+/* The rest of the configuration is shared */
+#include <configs/mxs.h>
+
+#endif /* __CONFIGS_BG0900_H__ */