--- /dev/null
+/*
+ * U-boot - Configuration file for CSP Minotaur board
+ *
+ * Thu Oct 25 15:30:44 CEST 2007 <hackfin@section5.ch>
+ * Minotaur config, brushed up for official uClinux dist.
+ * Parallel flash support disabled, SPI flash boot command
+ * added ('run flashboot').
+ *
+ * Flash image map:
+ *
+ * 0x00000000 u-boot bootstrap
+ * 0x00010000 environment
+ * 0x00020000 u-boot code
+ * 0x00030000 uImage.initramfs
+ *
+ */
+
+#ifndef __CONFIG_BF537_MINOTAUR_H__
+#define __CONFIG_BF537_MINOTAUR_H__
+
+#include <asm/config-pre.h>
+
+
+/*
+ * Processor Settings
+ */
+#define CONFIG_BFIN_CPU bf537-0.2
+#define CONFIG_BFIN_BOOT_MODE BFIN_BOOT_SPI_MASTER
+
+
+/*
+ * Clock Settings
+ * CCLK = (CLKIN * VCO_MULT) / CCLK_DIV
+ * SCLK = (CLKIN * VCO_MULT) / SCLK_DIV
+ */
+/* CONFIG_CLKIN_HZ is any value in Hz */
+#define CONFIG_CLKIN_HZ 25000000
+/* CLKIN_HALF controls the DF bit in PLL_CTL 0 = CLKIN */
+/* 1 = CLKIN / 2 */
+#define CONFIG_CLKIN_HALF 0
+/* PLL_BYPASS controls the BYPASS bit in PLL_CTL 0 = do not bypass */
+/* 1 = bypass PLL */
+#define CONFIG_PLL_BYPASS 0
+/* VCO_MULT controls the MSEL (multiplier) bits in PLL_CTL */
+/* Values can range from 0-63 (where 0 means 64) */
+#define CONFIG_VCO_MULT 20
+/* CCLK_DIV controls the core clock divider */
+/* Values can be 1, 2, 4, or 8 ONLY */
+#define CONFIG_CCLK_DIV 1
+/* SCLK_DIV controls the system clock divider */
+/* Values can range from 1-15 */
+#define CONFIG_SCLK_DIV 5
+
+
+/*
+ * Memory Settings
+ */
+#define CONFIG_MEM_SIZE 32
+#define CONFIG_MEM_ADD_WDTH 9
+
+#define CONFIG_EBIU_SDRRC_VAL 0x306
+#define CONFIG_EBIU_SDGCTL_VAL 0x91114d
+
+#define CONFIG_EBIU_AMGCTL_VAL 0xFF
+#define CONFIG_EBIU_AMBCTL0_VAL 0x7BB07BB0
+#define CONFIG_EBIU_AMBCTL1_VAL 0xFFC27BB0
+
+#define CONFIG_SYS_MONITOR_LEN (256 << 10)
+#define CONFIG_SYS_MALLOC_LEN (128 << 10)
+
+
+/*
+ * Network Settings
+ */
+#ifndef __ADSPBF534__
+#define CONFIG_BFIN_MAC
+#define CONFIG_NETCONSOLE 1
+#endif
+#ifdef CONFIG_BFIN_MAC
+#define CONFIG_IPADDR 192.168.0.15
+#define CONFIG_NETMASK 255.255.255.0
+#define CONFIG_GATEWAYIP 192.168.0.1
+#define CONFIG_SERVERIP 192.168.0.2
+#define CONFIG_HOSTNAME bf537-minotaur
+#endif
+
+#define CONFIG_SYS_AUTOLOAD "no"
+#define CONFIG_ROOTPATH "/romfs"
+/* Uncomment next line to use fixed MAC address */
+/* #define CONFIG_ETHADDR 02:80:ad:20:31:42 */
+
+#define CONFIG_LIB_RAND
+
+/*
+ * Flash Settings
+ */
+/* We don't have a parallel flash chip there */
+#define CONFIG_SYS_NO_FLASH
+
+
+/*
+ * SPI Settings
+ */
+#define CONFIG_BFIN_SPI
+#define CONFIG_ENV_SPI_MAX_HZ 30000000
+#define CONFIG_SF_DEFAULT_SPEED 30000000
+#define CONFIG_SPI_FLASH
+#define CONFIG_SPI_FLASH_STMICRO
+
+
+/*
+ * Env Storage Settings
+ */
+#define CONFIG_ENV_IS_IN_SPI_FLASH
+#define CONFIG_ENV_OFFSET 0x10000
+#define CONFIG_ENV_SIZE 0x10000
+#define CONFIG_ENV_SECT_SIZE 0x10000
+#define CONFIG_ENV_IS_EMBEDDED_IN_LDR
+
+
+/*
+ * I2C settings
+ */
+#define CONFIG_BFIN_TWI_I2C 1
+#define CONFIG_HARD_I2C 1
+#define CONFIG_SYS_I2C_SPEED 50000
+#define CONFIG_SYS_I2C_SLAVE 0
+
+
+/*
+ * Misc Settings
+ */
+#define CONFIG_SYS_LONGHELP 1
+#define CONFIG_CMDLINE_EDITING 1
+#define CONFIG_ENV_OVERWRITE 1
+#define CONFIG_MISC_INIT_R
+
+#define CONFIG_BAUDRATE 57600
+#define CONFIG_UART_CONSOLE 0
+#define CONFIG_BFIN_SERIAL
+
+#define CONFIG_PANIC_HANG 1
+#define CONFIG_RTC_BFIN 1
+#define CONFIG_BOOT_RETRY_TIME -1
+#define CONFIG_LOADS_ECHO 1
+
+#if (CONFIG_BFIN_BOOT_MODE == BFIN_BOOT_UART)
+# define CONFIG_BOOTDELAY -1
+#else
+# define CONFIG_BOOTDELAY 5
+#endif
+
+#include <config_cmd_default.h>
+
+#ifdef CONFIG_BFIN_MAC
+# define CONFIG_CMD_DHCP
+# define CONFIG_CMD_PING
+#else
+# undef CONFIG_CMD_NET
+# undef CONFIG_CMD_NFS
+#endif
+
+#define CONFIG_CMD_BOOTLDR
+#define CONFIG_CMD_CACHE
+#define CONFIG_CMD_DATE
+#define CONFIG_CMD_ELF
+#undef CONFIG_CMD_FLASH
+#define CONFIG_CMD_I2C
+#undef CONFIG_CMD_IMLS
+#define CONFIG_CMD_SF
+
+#define CONFIG_BOOTCOMMAND "run ramboot"
+#define CONFIG_BOOTARGS "root=/dev/mtdblock0 rw"
+#define CONFIG_SYS_PROMPT "minotaur> "
+
+#define BOOT_ENV_SETTINGS \
+ "update=tftpboot $(loadaddr) u-boot.ldr;" \
+ "sf probe " __stringify(BFIN_BOOT_SPI_SSEL) ";" \
+ "sf erase 0 0x30000;" \
+ "sf write $(loadaddr) 0 $(filesize)" \
+ "flashboot=sf read 0x1000000 0x30000 0x320000;" \
+ "bootm 0x1000000\0"
+#ifdef CONFIG_BFIN_MAC
+# define NETWORK_ENV_SETTINGS \
+ "nfsargs=setenv bootargs root=/dev/nfs rw " \
+ "nfsroot=$(serverip):$(rootpath)\0" \
+ "addip=setenv bootargs $(bootargs) " \
+ "ip=$(ipaddr):$(serverip):$(gatewayip):$(netmask)" \
+ ":$(hostname):eth0:off\0" \
+ "ramboot=tftpboot $(loadaddr) linux;" \
+ "run ramargs;run addip;bootelf\0" \
+ "nfsboot=tftpboot $(loadaddr) linux;" \
+ "run nfsargs;run addip;bootelf\0"
+#else
+# define NETWORK_ENV_SETTINGS
+#endif
+#define CONFIG_EXTRA_ENV_SETTINGS \
+ NETWORK_ENV_SETTINGS \
+ "ramargs=setenv bootargs " CONFIG_BOOTARGS "\0" \
+ BOOT_ENV_SETTINGS
+
+#endif
Code Review / kvmfornfv.git / blobdiff