Add qemu 2.4.0

[kvmfornfv.git] / qemu / roms / u-boot / include / configs / bf527-sdp.h

diff --git a/qemu/roms/u-boot/include/configs/bf527-sdp.h b/qemu/roms/u-boot/include/configs/bf527-sdp.h
new file mode 100644 (file)
index 0000000..458868a
--- /dev/null
+++ b/qemu/roms/u-boot/include/configs/bf527-sdp.h
@@ -0,0 +1,122 @@
+/*
+ * U-boot - Configuration file for BF527 SDP board
+ */
+
+#ifndef __CONFIG_BF527_SDP_H__
+#define __CONFIG_BF527_SDP_H__
+
+#include <asm/config-pre.h>
+
+
+/*
+ * Processor Settings
+ */
+#define CONFIG_BFIN_CPU             bf527-0.2
+#define CONFIG_BFIN_BOOT_MODE       BFIN_BOOT_PARA
+
+
+/*
+ * Clock Settings
+ *     CCLK = (CLKIN * VCO_MULT) / CCLK_DIV
+ *     SCLK = (CLKIN * VCO_MULT) / SCLK_DIV
+ */
+/* CONFIG_CLKIN_HZ is any value in Hz                                  */
+#define CONFIG_CLKIN_HZ                        24000000
+/* CLKIN_HALF controls the DF bit in PLL_CTL      0 = CLKIN            */
+/*                                                1 = CLKIN / 2                */
+#define CONFIG_CLKIN_HALF              0
+/* PLL_BYPASS controls the BYPASS bit in PLL_CTL  0 = do not bypass    */
+/*                                                1 = bypass PLL       */
+#define CONFIG_PLL_BYPASS              0
+/* VCO_MULT controls the MSEL (multiplier) bits in PLL_CTL             */
+/* Values can range from 0-63 (where 0 means 64)                       */
+#define CONFIG_VCO_MULT                        25
+/* CCLK_DIV controls the core clock divider                            */
+/* Values can be 1, 2, 4, or 8 ONLY                                    */
+#define CONFIG_CCLK_DIV                        1
+/* SCLK_DIV controls the system clock divider                          */
+/* Values can range from 1-15                                          */
+#define CONFIG_SCLK_DIV                        5
+
+#define CONFIG_PLL_LOCKCNT_VAL 0x0200
+#define CONFIG_PLL_CTL_VAL             0x2a00
+#define CONFIG_VR_CTL_VAL              0x7090
+
+
+/*
+ * Memory Settings
+ */
+#define CONFIG_MEM_ADD_WDTH    9
+#define CONFIG_MEM_SIZE                32
+
+#define CONFIG_EBIU_SDRRC_VAL  0x00FE
+#define CONFIG_EBIU_SDGCTL_VAL 0x8011998d
+
+#define CONFIG_EBIU_AMGCTL_VAL (AMCKEN | AMBEN_ALL)
+#define CONFIG_EBIU_AMBCTL0_VAL        (B1WAT_15 | B1RAT_15 | B1HT_3 | B1RDYPOL | B0WAT_15 | B0RAT_15 | B0HT_3 | B0RDYPOL)
+#define CONFIG_EBIU_AMBCTL1_VAL        (B3WAT_15 | B3RAT_15 | B3HT_3 | B3RDYPOL | B2WAT_15 | B2RAT_15 | B2HT_3 | B2RDYPOL)
+
+#define CONFIG_SYS_MONITOR_LEN (768 * 1024)
+#define CONFIG_SYS_MALLOC_LEN  (640 * 1024)
+
+
+/*
+ * Flash Settings
+ */
+#define CONFIG_FLASH_CFI_DRIVER
+#define CONFIG_SYS_FLASH_BASE          0x20000000
+#define CONFIG_SYS_FLASH_CFI
+#define CONFIG_SYS_FLASH_PROTECTION
+#define CONFIG_SYS_MAX_FLASH_BANKS     1
+#define CONFIG_SYS_MAX_FLASH_SECT      259
+
+
+/*
+ * SPI Settings
+ */
+#define CONFIG_BFIN_SPI
+#define CONFIG_ENV_SPI_MAX_HZ  30000000
+#define CONFIG_SF_DEFAULT_SPEED        30000000
+#define CONFIG_SPI_FLASH
+#define CONFIG_SPI_FLASH_ALL
+
+
+/*
+ * Env Storage Settings
+ */
+#if (CONFIG_BFIN_BOOT_MODE == BFIN_BOOT_SPI_MASTER)
+#define CONFIG_ENV_IS_IN_SPI_FLASH
+#define CONFIG_ENV_OFFSET      0x10000
+#define CONFIG_ENV_SIZE                0x2000
+#define CONFIG_ENV_SECT_SIZE   0x10000
+#define CONFIG_ENV_IS_EMBEDDED_IN_LDR
+#else
+#define CONFIG_ENV_IS_IN_FLASH
+#define CONFIG_ENV_OFFSET      0x4000
+#define CONFIG_ENV_ADDR                (CONFIG_SYS_FLASH_BASE + CONFIG_ENV_OFFSET)
+#define CONFIG_ENV_SIZE                0x2000
+#define CONFIG_ENV_SECT_SIZE   0x2000
+#define CONFIG_ENV_IS_EMBEDDED_IN_LDR
+#endif
+
+
+/*
+ * I2C Settings
+ */
+#define CONFIG_BFIN_TWI_I2C    1
+#define CONFIG_HARD_I2C                1
+
+
+/*
+ * Misc Settings
+ */
+#define CONFIG_MISC_INIT_R
+#define CONFIG_UART_CONSOLE    0
+#define CONFIG_CC_OPTIMIZE_LIBS_FOR_SPEED
+
+/*
+ * Pull in common ADI header for remaining command/environment setup
+ */
+#include <configs/bfin_adi_common.h>
+
+#endif