Add qemu 2.4.0

[kvmfornfv.git] / qemu / roms / u-boot / include / configs / bct-brettl2.h

diff --git a/qemu/roms/u-boot/include/configs/bct-brettl2.h b/qemu/roms/u-boot/include/configs/bct-brettl2.h
new file mode 100644 (file)
index 0000000..c1eda96
--- /dev/null
+++ b/qemu/roms/u-boot/include/configs/bct-brettl2.h
@@ -0,0 +1,152 @@
+/*
+ * U-boot - Configuration file for BF536 brettl2 board
+ */
+
+#ifndef __CONFIG_BCT_BRETTL2_H__
+#define __CONFIG_BCT_BRETTL2_H__
+
+#include <asm/config-pre.h>
+
+
+/*
+ * Processor Settings
+ */
+#define CONFIG_BFIN_CPU             bf536-0.3
+#define CONFIG_BFIN_BOOT_MODE       BFIN_BOOT_BYPASS
+
+
+/*
+ * Clock Settings
+ *     CCLK = (CLKIN * VCO_MULT) / CCLK_DIV
+ *     SCLK = (CLKIN * VCO_MULT) / SCLK_DIV
+ */
+/* CONFIG_CLKIN_HZ is any value in Hz                                  */
+#define CONFIG_CLKIN_HZ                        16384000
+/* CLKIN_HALF controls the DF bit in PLL_CTL     0 = CLKIN             */
+/*                                               1 = CLKIN / 2         */
+#define CONFIG_CLKIN_HALF              0
+/* PLL_BYPASS controls the BYPASS bit in PLL_CTL  0 = do not bypass    */
+/*                                               1 = bypass PLL        */
+#define CONFIG_PLL_BYPASS              0
+/* VCO_MULT controls the MSEL (multiplier) bits in PLL_CTL             */
+/* Values can range from 0-63 (where 0 means 64)                       */
+#define CONFIG_VCO_MULT                        24
+/* CCLK_DIV controls the core clock divider                            */
+/* Values can be 1, 2, 4, or 8 ONLY                                    */
+#define CONFIG_CCLK_DIV                        1
+/* SCLK_DIV controls the system clock divider                          */
+/* Values can range from 1-15                                          */
+#define CONFIG_SCLK_DIV                        3
+#define CONFIG_VR_CTL_VAL      (VLEV_110 | GAIN_20 | FREQ_1000)
+
+
+/*
+ * Memory Settings
+ */
+#define CONFIG_MEM_ADD_WDTH    9
+#define CONFIG_MEM_SIZE                32
+
+
+/*
+ * SDRAM Settings
+ */
+#define CONFIG_EBIU_SDRRC_VAL  0x07f6
+#define CONFIG_EBIU_SDGCTL_VAL 0x9111cd
+
+#define CONFIG_EBIU_AMGCTL_VAL (AMBEN_ALL)
+#define CONFIG_EBIU_AMBCTL0_VAL        (B1WAT_7 | B1RAT_11 | B1HT_2 | B1ST_3 | B0WAT_7 | B0RAT_11 | B0HT_2 | B0ST_3)
+#define CONFIG_EBIU_AMBCTL1_VAL        (B3WAT_7 | B3RAT_11 | B3HT_2 | B3ST_3 | B2WAT_7 | B2RAT_11 | B2HT_2 | B2ST_3)
+
+#define CONFIG_SYS_MONITOR_LEN         (256 * 1024)
+#define CONFIG_SYS_MALLOC_LEN          (128 * 1024)
+
+
+/*
+ * Network Settings
+ */
+#ifndef __ADSPBF534__
+#define ADI_CMDS_NETWORK       1
+#define CONFIG_BFIN_MAC                1
+#define CONFIG_NETCONSOLE      1
+#define CONFIG_HOSTNAME                brettl2
+#define CONFIG_IPADDR          192.168.233.224
+#define CONFIG_GATEWAYIP       192.168.233.1
+#define CONFIG_SERVERIP                192.168.233.53
+#define CONFIG_ROOTPATH                "/romfs/brettl2"
+/* Uncomment next line to use fixed MAC address */
+/* #define CONFIG_ETHADDR      02:80:ad:20:31:e8 */
+#define CONFIG_LIB_RAND
+#endif
+
+
+/*
+ * Flash Settings
+ */
+#define CONFIG_FLASH_CFI_DRIVER
+#define CONFIG_SYS_FLASH_CFI
+#define CONFIG_CFI_FLASH_USE_WEAK_ACCESSORS
+#define CONFIG_SYS_FLASH_PROTECTION
+#define CONFIG_SYS_FLASH_BASE                  0x20000000
+#define CONFIG_SYS_MAX_FLASH_BANKS             1
+#define CONFIG_SYS_MAX_FLASH_SECT              135
+
+
+/*
+ * Env Storage Settings
+ */
+#define CONFIG_ENV_IS_IN_FLASH 1
+#define CONFIG_ENV_OFFSET      0x4000
+#define CONFIG_ENV_SIZE                0x2000
+#define CONFIG_ENV_SECT_SIZE   0x10000
+
+#if (CONFIG_BFIN_BOOT_MODE == BFIN_BOOT_BYPASS)
+#define ENV_IS_EMBEDDED
+#else
+#define CONFIG_ENV_IS_EMBEDDED_IN_LDR
+#endif
+
+#ifdef ENV_IS_EMBEDDED
+/* WARNING - the following is hand-optimized to fit within
+ * the sector before the environment sector. If it throws
+ * an error during compilation remove an object here to get
+ * it linked after the configuration sector.
+ */
+# define LDS_BOARD_TEXT \
+       arch/blackfin/lib/built-in.o (.text*); \
+       arch/blackfin/cpu/built-in.o (.text*); \
+       . = DEFINED(env_offset) ? env_offset : .; \
+       common/env_embedded.o (.text*);
+#endif
+
+
+/*
+ * I2C Settings
+ */
+#define CONFIG_BFIN_TWI_I2C    1
+#define CONFIG_HARD_I2C                1
+
+
+/*
+ * Misc Settings
+ */
+#define CONFIG_BOOTDELAY       1
+#define CONFIG_LOADADDR                0x800000
+#define CONFIG_MISC_INIT_R
+#define CONFIG_UART_CONSOLE    0
+#define CONFIG_BAUDRATE                115200
+#define CONFIG_MTD_DEVICE
+#define CONFIG_MTD_PARTITIONS
+#define CONFIG_SYS_HUSH_PARSER
+#define CONFIG_CC_OPTIMIZE_LIBS_FOR_SPEED
+
+/*
+ * Pull in common ADI header for remaining command/environment setup
+ */
+#include <configs/bfin_adi_common.h>
+
+/* disable unnecessary features */
+#undef CONFIG_BOOTM_RTEMS
+#undef CONFIG_BZIP2
+#undef CONFIG_KALLSYMS
+
+#endif