Add qemu 2.4.0

[kvmfornfv.git] / qemu / roms / u-boot / include / configs / apx4devkit.h

diff --git a/qemu/roms/u-boot/include/configs/apx4devkit.h b/qemu/roms/u-boot/include/configs/apx4devkit.h
new file mode 100644 (file)
index 0000000..d1f18bc
--- /dev/null
+++ b/qemu/roms/u-boot/include/configs/apx4devkit.h
@@ -0,0 +1,144 @@
+/*
+ * Copyright (C) 2012 Bluegiga Technologies Oy
+ *
+ * Authors:
+ * Veli-Pekka Peltola <veli-pekka.peltola@bluegiga.com>
+ * Lauri Hintsala <lauri.hintsala@bluegiga.com>
+ *
+ * Based on m28evk.h:
+ * Copyright (C) 2011 Marek Vasut <marek.vasut@gmail.com>
+ * on behalf of DENX Software Engineering GmbH
+ *
+ * SPDX-License-Identifier:    GPL-2.0+
+ */
+#ifndef __CONFIGS_APX4DEVKIT_H__
+#define __CONFIGS_APX4DEVKIT_H__
+
+/* System configurations */
+#define CONFIG_MX28                            /* i.MX28 SoC */
+#define MACH_TYPE_APX4DEVKIT   3712
+#define CONFIG_MACH_TYPE       MACH_TYPE_APX4DEVKIT
+
+/* U-Boot Commands */
+#define CONFIG_SYS_NO_FLASH
+#include <config_cmd_default.h>
+#define CONFIG_DISPLAY_CPUINFO
+#define CONFIG_DOS_PARTITION
+
+#define CONFIG_CMD_CACHE
+#define CONFIG_CMD_DATE
+#define CONFIG_CMD_DHCP
+#define CONFIG_CMD_EXT2
+#define CONFIG_CMD_FAT
+#define CONFIG_CMD_I2C
+#define CONFIG_CMD_MII
+#define CONFIG_CMD_MMC
+#define CONFIG_CMD_NAND
+#define CONFIG_CMD_NET
+#define CONFIG_CMD_NFS
+#define CONFIG_CMD_PING
+#define CONFIG_CMD_SAVEENV
+#define CONFIG_CMD_USB
+
+/* Memory configuration */
+#define CONFIG_NR_DRAM_BANKS           1               /* 1 bank of DRAM */
+#define PHYS_SDRAM_1                   0x40000000      /* Base address */
+#define PHYS_SDRAM_1_SIZE              0x20000000      /* Max 512 MB RAM */
+#define CONFIG_SYS_SDRAM_BASE          PHYS_SDRAM_1
+
+
+/* Environment */
+#define CONFIG_ENV_OVERWRITE
+#define CONFIG_ENV_IS_IN_NAND
+
+/* Environment is in MMC */
+#if defined(CONFIG_CMD_MMC) && defined(CONFIG_ENV_IS_IN_MMC)
+#define CONFIG_ENV_OFFSET              (256 * 1024)
+#define CONFIG_ENV_SIZE                        (16 * 1024)
+#define CONFIG_SYS_MMC_ENV_DEV         0
+#endif
+
+/* Environment is in NAND */
+#if defined(CONFIG_CMD_NAND) && defined(CONFIG_ENV_IS_IN_NAND)
+#define CONFIG_ENV_SECT_SIZE           (128 * 1024)
+#define CONFIG_ENV_SIZE                        (128 * 1024)
+#define CONFIG_ENV_SIZE_REDUND         CONFIG_ENV_SIZE
+#define CONFIG_ENV_RANGE               (384 * 1024)
+#define CONFIG_ENV_OFFSET              0x120000
+#define CONFIG_ENV_OFFSET_REDUND       \
+               (CONFIG_ENV_OFFSET + CONFIG_ENV_RANGE)
+#endif
+
+/* UBI and NAND partitioning */
+#ifdef CONFIG_CMD_NAND
+#define CONFIG_CMD_UBI
+#define CONFIG_CMD_UBIFS
+#define CONFIG_CMD_MTDPARTS
+#define CONFIG_RBTREE
+#define CONFIG_LZO
+#define CONFIG_MTD_DEVICE
+#define CONFIG_MTD_PARTITIONS
+#define MTDIDS_DEFAULT                 "nand0=gpmi-nand"
+#define MTDPARTS_DEFAULT \
+       "mtdparts=gpmi-nand:128k(bootstrap),1024k(boot),768k(env),-(root)"
+#else
+#define MTDPARTS_DEFAULT               ""
+#endif
+
+/* FEC Ethernet on SoC */
+#ifdef CONFIG_CMD_NET
+#define CONFIG_FEC_MXC
+#define CONFIG_NET_MULTI
+#define CONFIG_ETHPRIME                        "FEC"
+#define CONFIG_FEC_MXC_PHYADDR         0
+#define IMX_FEC_BASE                   MXS_ENET0_BASE
+#endif
+
+/* USB */
+#ifdef CONFIG_CMD_USB
+#define CONFIG_EHCI_MXS_PORT1
+#define CONFIG_USB_MAX_CONTROLLER_COUNT        1
+#define CONFIG_USB_STORAGE
+#endif
+
+
+/* RTC */
+#ifdef CONFIG_CMD_DATE
+#define CONFIG_RTC_PCF8563
+#define CONFIG_SYS_I2C_RTC_ADDR                0x51
+#endif
+
+/* Boot Linux */
+#define CONFIG_BOOTDELAY               1
+#define CONFIG_BOOTFILE                        "uImage"
+#define CONFIG_BOOTCOMMAND             "run bootcmd_nand"
+#define CONFIG_LOADADDR                        0x41000000
+#define CONFIG_SYS_LOAD_ADDR           CONFIG_LOADADDR
+#define CONFIG_SERIAL_TAG
+#define CONFIG_REVISION_TAG
+
+/* Extra Environments */
+#define CONFIG_EXTRA_ENV_SETTINGS \
+       "mtdparts=" MTDPARTS_DEFAULT "\0" \
+       "verify=no\0" \
+       "bootcmd=run bootcmd_nand\0" \
+       "kernelargs=console=tty0 console=ttyAMA0,115200 consoleblank=0\0" \
+       "bootargs_nand=" \
+               "setenv bootargs ${kernelargs} ubi.mtd=3,2048 " \
+               "root=ubi0:rootfs rootfstype=ubifs ${mtdparts} rw\0" \
+       "bootcmd_nand=" \
+               "run bootargs_nand && ubi part root 2048 && " \
+               "ubifsmount ubi:rootfs && ubifsload 41000000 boot/uImage && " \
+               "bootm 41000000\0" \
+       "bootargs_mmc=" \
+               "setenv bootargs ${kernelargs} " \
+               "root=/dev/mmcblk0p2 rootwait ${mtdparts} rw\0" \
+       "bootcmd_mmc=" \
+               "run bootargs_mmc && mmc rescan && " \
+               "ext2load mmc 0:2 41000000 boot/uImage && bootm 41000000\0" \
+""
+
+/* The rest of the configuration is shared */
+#include <configs/mxs.h>
+
+#endif /* __CONFIGS_APX4DEVKIT_H__ */