--- /dev/null
+/*
+ * Copyright (c) 2011 The Chromium OS Authors.
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#include <common.h>
+#include <fdtdec.h>
+#include <lcd.h>
+
+#include <asm/system.h>
+#include <asm/gpio.h>
+
+#include <asm/arch/clock.h>
+#include <asm/arch/funcmux.h>
+#include <asm/arch/pinmux.h>
+#include <asm/arch/pwm.h>
+#include <asm/arch/display.h>
+#include <asm/arch-tegra/timer.h>
+
+DECLARE_GLOBAL_DATA_PTR;
+
+/* These are the stages we go throuh in enabling the LCD */
+enum stage_t {
+ STAGE_START,
+ STAGE_PANEL_VDD,
+ STAGE_LVDS,
+ STAGE_BACKLIGHT_VDD,
+ STAGE_PWM,
+ STAGE_BACKLIGHT_EN,
+ STAGE_DONE,
+};
+
+static enum stage_t stage; /* Current stage we are at */
+static unsigned long timer_next; /* Time we can move onto next stage */
+
+/* Our LCD config, set up in handle_stage() */
+static struct fdt_panel_config config;
+struct fdt_disp_config *disp_config; /* Display controller config */
+
+enum {
+ /* Maximum LCD size we support */
+ LCD_MAX_WIDTH = 1366,
+ LCD_MAX_HEIGHT = 768,
+ LCD_MAX_LOG2_BPP = 4, /* 2^4 = 16 bpp */
+};
+
+vidinfo_t panel_info = {
+ /* Insert a value here so that we don't end up in the BSS */
+ .vl_col = -1,
+};
+
+#ifndef CONFIG_OF_CONTROL
+#error "You must enable CONFIG_OF_CONTROL to get Tegra LCD support"
+#endif
+
+static void update_panel_size(struct fdt_disp_config *config)
+{
+ panel_info.vl_col = config->width;
+ panel_info.vl_row = config->height;
+ panel_info.vl_bpix = config->log2_bpp;
+}
+
+/*
+ * Main init function called by lcd driver.
+ * Inits and then prints test pattern if required.
+ */
+
+void lcd_ctrl_init(void *lcdbase)
+{
+ int type = DCACHE_OFF;
+ int size;
+
+ assert(disp_config);
+
+ /* Make sure that we can acommodate the selected LCD */
+ assert(disp_config->width <= LCD_MAX_WIDTH);
+ assert(disp_config->height <= LCD_MAX_HEIGHT);
+ assert(disp_config->log2_bpp <= LCD_MAX_LOG2_BPP);
+ if (disp_config->width <= LCD_MAX_WIDTH
+ && disp_config->height <= LCD_MAX_HEIGHT
+ && disp_config->log2_bpp <= LCD_MAX_LOG2_BPP)
+ update_panel_size(disp_config);
+ size = lcd_get_size(&lcd_line_length);
+
+ /* Set up the LCD caching as requested */
+ if (config.cache_type & FDT_LCD_CACHE_WRITE_THROUGH)
+ type = DCACHE_WRITETHROUGH;
+ else if (config.cache_type & FDT_LCD_CACHE_WRITE_BACK)
+ type = DCACHE_WRITEBACK;
+ mmu_set_region_dcache_behaviour(disp_config->frame_buffer, size, type);
+
+ /* Enable flushing after LCD writes if requested */
+ lcd_set_flush_dcache(config.cache_type & FDT_LCD_CACHE_FLUSH);
+
+ debug("LCD frame buffer at %08X\n", disp_config->frame_buffer);
+}
+
+ulong calc_fbsize(void)
+{
+ return (panel_info.vl_col * panel_info.vl_row *
+ NBITS(panel_info.vl_bpix)) / 8;
+}
+
+void lcd_setcolreg(ushort regno, ushort red, ushort green, ushort blue)
+{
+}
+
+void tegra_lcd_early_init(const void *blob)
+{
+ /*
+ * Go with the maximum size for now. We will fix this up after
+ * relocation. These values are only used for memory alocation.
+ */
+ panel_info.vl_col = LCD_MAX_WIDTH;
+ panel_info.vl_row = LCD_MAX_HEIGHT;
+ panel_info.vl_bpix = LCD_MAX_LOG2_BPP;
+}
+
+/**
+ * Decode the panel information from the fdt.
+ *
+ * @param blob fdt blob
+ * @param config structure to store fdt config into
+ * @return 0 if ok, -ve on error
+ */
+static int fdt_decode_lcd(const void *blob, struct fdt_panel_config *config)
+{
+ int display_node;
+
+ disp_config = tegra_display_get_config();
+ if (!disp_config) {
+ debug("%s: Display controller is not configured\n", __func__);
+ return -1;
+ }
+ display_node = disp_config->panel_node;
+ if (display_node < 0) {
+ debug("%s: No panel configuration available\n", __func__);
+ return -1;
+ }
+
+ config->pwm_channel = pwm_request(blob, display_node, "nvidia,pwm");
+ if (config->pwm_channel < 0) {
+ debug("%s: Unable to request PWM channel\n", __func__);
+ return -1;
+ }
+
+ config->cache_type = fdtdec_get_int(blob, display_node,
+ "nvidia,cache-type",
+ FDT_LCD_CACHE_WRITE_BACK_FLUSH);
+
+ /* These GPIOs are all optional */
+ fdtdec_decode_gpio(blob, display_node, "nvidia,backlight-enable-gpios",
+ &config->backlight_en);
+ fdtdec_decode_gpio(blob, display_node, "nvidia,lvds-shutdown-gpios",
+ &config->lvds_shutdown);
+ fdtdec_decode_gpio(blob, display_node, "nvidia,backlight-vdd-gpios",
+ &config->backlight_vdd);
+ fdtdec_decode_gpio(blob, display_node, "nvidia,panel-vdd-gpios",
+ &config->panel_vdd);
+
+ return fdtdec_get_int_array(blob, display_node, "nvidia,panel-timings",
+ config->panel_timings, FDT_LCD_TIMINGS);
+}
+
+/**
+ * Handle the next stage of device init
+ */
+static int handle_stage(const void *blob)
+{
+ debug("%s: stage %d\n", __func__, stage);
+
+ /* do the things for this stage */
+ switch (stage) {
+ case STAGE_START:
+ /* Initialize the Tegra display controller */
+ if (tegra_display_probe(gd->fdt_blob, (void *)gd->fb_base)) {
+ printf("%s: Failed to probe display driver\n",
+ __func__);
+ return -1;
+ }
+
+ /* get panel details */
+ if (fdt_decode_lcd(blob, &config)) {
+ printf("No valid LCD information in device tree\n");
+ return -1;
+ }
+
+ /*
+ * It is possible that the FDT has requested that the LCD be
+ * disabled. We currently don't support this. It would require
+ * changes to U-Boot LCD subsystem to have LCD support
+ * compiled in but not used. An easier option might be to
+ * still have a frame buffer, but leave the backlight off and
+ * remove all mention of lcd in the stdout environment
+ * variable.
+ */
+
+ funcmux_select(PERIPH_ID_DISP1, FUNCMUX_DEFAULT);
+
+ fdtdec_setup_gpio(&config.panel_vdd);
+ fdtdec_setup_gpio(&config.lvds_shutdown);
+ fdtdec_setup_gpio(&config.backlight_vdd);
+ fdtdec_setup_gpio(&config.backlight_en);
+
+ /*
+ * TODO: If fdt includes output flag we can omit this code
+ * since fdtdec_setup_gpio will do it for us.
+ */
+ if (fdt_gpio_isvalid(&config.panel_vdd))
+ gpio_direction_output(config.panel_vdd.gpio, 0);
+ if (fdt_gpio_isvalid(&config.lvds_shutdown))
+ gpio_direction_output(config.lvds_shutdown.gpio, 0);
+ if (fdt_gpio_isvalid(&config.backlight_vdd))
+ gpio_direction_output(config.backlight_vdd.gpio, 0);
+ if (fdt_gpio_isvalid(&config.backlight_en))
+ gpio_direction_output(config.backlight_en.gpio, 0);
+ break;
+ case STAGE_PANEL_VDD:
+ if (fdt_gpio_isvalid(&config.panel_vdd))
+ gpio_direction_output(config.panel_vdd.gpio, 1);
+ break;
+ case STAGE_LVDS:
+ if (fdt_gpio_isvalid(&config.lvds_shutdown))
+ gpio_set_value(config.lvds_shutdown.gpio, 1);
+ break;
+ case STAGE_BACKLIGHT_VDD:
+ if (fdt_gpio_isvalid(&config.backlight_vdd))
+ gpio_set_value(config.backlight_vdd.gpio, 1);
+ break;
+ case STAGE_PWM:
+ /* Enable PWM at 15/16 high, 32768 Hz with divider 1 */
+ pinmux_set_func(PMUX_PINGRP_GPU, PMUX_FUNC_PWM);
+ pinmux_tristate_disable(PMUX_PINGRP_GPU);
+
+ pwm_enable(config.pwm_channel, 32768, 0xdf, 1);
+ break;
+ case STAGE_BACKLIGHT_EN:
+ if (fdt_gpio_isvalid(&config.backlight_en))
+ gpio_set_value(config.backlight_en.gpio, 1);
+ break;
+ case STAGE_DONE:
+ break;
+ }
+
+ /* set up timer for next stage */
+ timer_next = timer_get_us();
+ if (stage < FDT_LCD_TIMINGS)
+ timer_next += config.panel_timings[stage] * 1000;
+
+ /* move to next stage */
+ stage++;
+ return 0;
+}
+
+int tegra_lcd_check_next_stage(const void *blob, int wait)
+{
+ if (stage == STAGE_DONE)
+ return 0;
+
+ do {
+ /* wait if we need to */
+ debug("%s: stage %d\n", __func__, stage);
+ if (stage != STAGE_START) {
+ int delay = timer_next - timer_get_us();
+
+ if (delay > 0) {
+ if (wait)
+ udelay(delay);
+ else
+ return 0;
+ }
+ }
+
+ if (handle_stage(blob))
+ return -1;
+ } while (wait && stage != STAGE_DONE);
+ if (stage == STAGE_DONE)
+ debug("%s: LCD init complete\n", __func__);
+
+ return 0;
+}
+
+void lcd_enable(void)
+{
+ /*
+ * Backlight and power init will be done separately in
+ * tegra_lcd_check_next_stage(), which should be called in
+ * board_late_init().
+ *
+ * U-Boot code supports only colour depth, selected at compile time.
+ * The device tree setting should match this. Otherwise the display
+ * will not look right, and U-Boot may crash.
+ */
+ if (disp_config->log2_bpp != LCD_BPP) {
+ printf("%s: Error: LCD depth configured in FDT (%d = %dbpp)"
+ " must match setting of LCD_BPP (%d)\n", __func__,
+ disp_config->log2_bpp, disp_config->bpp, LCD_BPP);
+ }
+}
Code Review / kvmfornfv.git / blobdiff