Add qemu 2.4.0
[kvmfornfv.git] / qemu / roms / u-boot / drivers / video / pxa_lcd.c
diff --git a/qemu/roms/u-boot/drivers/video/pxa_lcd.c b/qemu/roms/u-boot/drivers/video/pxa_lcd.c
new file mode 100644 (file)
index 0000000..e19f6ac
--- /dev/null
@@ -0,0 +1,625 @@
+/*
+ * PXA LCD Controller
+ *
+ * (C) Copyright 2001-2002
+ * Wolfgang Denk, DENX Software Engineering -- wd@denx.de
+ *
+ * SPDX-License-Identifier:    GPL-2.0+
+ */
+
+/************************************************************************/
+/* ** HEADER FILES                                                     */
+/************************************************************************/
+
+#include <config.h>
+#include <common.h>
+#include <version.h>
+#include <stdarg.h>
+#include <linux/types.h>
+#include <stdio_dev.h>
+#include <lcd.h>
+#include <asm/arch/pxa-regs.h>
+#include <asm/io.h>
+
+/* #define DEBUG */
+
+#ifdef CONFIG_LCD
+
+/*----------------------------------------------------------------------*/
+/*
+ * Define panel bpp, LCCR0, LCCR3 and panel_info video struct for
+ * your display.
+ */
+
+#ifdef CONFIG_PXA_VGA
+/* LCD outputs connected to a video DAC  */
+# define LCD_BPP       LCD_COLOR8
+
+/* you have to set lccr0 and lccr3 (including pcd) */
+# define REG_LCCR0     0x003008f8
+# define REG_LCCR3     0x0300FF01
+
+/* 640x480x16 @ 61 Hz */
+vidinfo_t panel_info = {
+       .vl_col         = 640,
+       .vl_row         = 480,
+       .vl_width       = 640,
+       .vl_height      = 480,
+       .vl_clkp        = CONFIG_SYS_HIGH,
+       .vl_oep         = CONFIG_SYS_HIGH,
+       .vl_hsp         = CONFIG_SYS_HIGH,
+       .vl_vsp         = CONFIG_SYS_HIGH,
+       .vl_dp          = CONFIG_SYS_HIGH,
+       .vl_bpix        = LCD_BPP,
+       .vl_lbw         = 0,
+       .vl_splt        = 0,
+       .vl_clor        = 0,
+       .vl_tft         = 1,
+       .vl_hpw         = 40,
+       .vl_blw         = 56,
+       .vl_elw         = 56,
+       .vl_vpw         = 20,
+       .vl_bfw         = 8,
+       .vl_efw         = 8,
+};
+#endif /* CONFIG_PXA_VIDEO */
+
+/*----------------------------------------------------------------------*/
+#ifdef CONFIG_SHARP_LM8V31
+
+# define LCD_BPP       LCD_COLOR8
+# define LCD_INVERT_COLORS     /* Needed for colors to be correct, but why?    */
+
+/* you have to set lccr0 and lccr3 (including pcd) */
+# define REG_LCCR0     0x0030087C
+# define REG_LCCR3     0x0340FF08
+
+vidinfo_t panel_info = {
+       .vl_col         = 640,
+       .vl_row         = 480,
+       .vl_width       = 157,
+       .vl_height      = 118,
+       .vl_clkp        = CONFIG_SYS_HIGH,
+       .vl_oep         = CONFIG_SYS_HIGH,
+       .vl_hsp         = CONFIG_SYS_HIGH,
+       .vl_vsp         = CONFIG_SYS_HIGH,
+       .vl_dp          = CONFIG_SYS_HIGH,
+       .vl_bpix        = LCD_BPP,
+       .vl_lbw         = 0,
+       .vl_splt        = 1,
+       .vl_clor        = 1,
+       .vl_tft         = 0,
+       .vl_hpw         = 1,
+       .vl_blw         = 3,
+       .vl_elw         = 3,
+       .vl_vpw         = 1,
+       .vl_bfw         = 0,
+       .vl_efw         = 0,
+};
+#endif /* CONFIG_SHARP_LM8V31 */
+/*----------------------------------------------------------------------*/
+#ifdef CONFIG_VOIPAC_LCD
+
+# define LCD_BPP       LCD_COLOR8
+# define LCD_INVERT_COLORS
+
+/* you have to set lccr0 and lccr3 (including pcd) */
+# define REG_LCCR0     0x043008f8
+# define REG_LCCR3     0x0340FF08
+
+vidinfo_t panel_info = {
+       .vl_col         = 640,
+       .vl_row         = 480,
+       .vl_width       = 157,
+       .vl_height      = 118,
+       .vl_clkp        = CONFIG_SYS_HIGH,
+       .vl_oep         = CONFIG_SYS_HIGH,
+       .vl_hsp         = CONFIG_SYS_HIGH,
+       .vl_vsp         = CONFIG_SYS_HIGH,
+       .vl_dp          = CONFIG_SYS_HIGH,
+       .vl_bpix        = LCD_BPP,
+       .vl_lbw         = 0,
+       .vl_splt        = 1,
+       .vl_clor        = 1,
+       .vl_tft         = 1,
+       .vl_hpw         = 32,
+       .vl_blw         = 144,
+       .vl_elw         = 32,
+       .vl_vpw         = 2,
+       .vl_bfw         = 13,
+       .vl_efw         = 30,
+};
+#endif /* CONFIG_VOIPAC_LCD */
+
+/*----------------------------------------------------------------------*/
+#ifdef CONFIG_HITACHI_SX14
+/* Hitachi SX14Q004-ZZA color STN LCD */
+#define LCD_BPP                LCD_COLOR8
+
+/* you have to set lccr0 and lccr3 (including pcd) */
+#define REG_LCCR0      0x00301079
+#define REG_LCCR3      0x0340FF20
+
+vidinfo_t panel_info = {
+       .vl_col         = 320,
+       .vl_row         = 240,
+       .vl_width       = 167,
+       .vl_height      = 109,
+       .vl_clkp        = CONFIG_SYS_HIGH,
+       .vl_oep         = CONFIG_SYS_HIGH,
+       .vl_hsp         = CONFIG_SYS_HIGH,
+       .vl_vsp         = CONFIG_SYS_HIGH,
+       .vl_dp          = CONFIG_SYS_HIGH,
+       .vl_bpix        = LCD_BPP,
+       .vl_lbw         = 1,
+       .vl_splt        = 0,
+       .vl_clor        = 1,
+       .vl_tft         = 0,
+       .vl_hpw         = 1,
+       .vl_blw         = 1,
+       .vl_elw         = 1,
+       .vl_vpw         = 7,
+       .vl_bfw         = 0,
+       .vl_efw         = 0,
+};
+#endif /* CONFIG_HITACHI_SX14 */
+
+/*----------------------------------------------------------------------*/
+#ifdef CONFIG_LMS283GF05
+
+# define LCD_BPP       LCD_COLOR8
+/*# define LCD_INVERT_COLORS*/
+
+/* you have to set lccr0 and lccr3 (including pcd) */
+# define REG_LCCR0     0x043008f8
+# define REG_LCCR3     0x03b00009
+
+vidinfo_t panel_info = {
+       .vl_col         = 240,
+       .vl_row         = 320,
+       .vl_width       = 240,
+       .vl_height      = 320,
+       .vl_clkp        = CONFIG_SYS_HIGH,
+       .vl_oep         = CONFIG_SYS_LOW,
+       .vl_hsp         = CONFIG_SYS_LOW,
+       .vl_vsp         = CONFIG_SYS_LOW,
+       .vl_dp          = CONFIG_SYS_HIGH,
+       .vl_bpix        = LCD_BPP,
+       .vl_lbw         = 0,
+       .vl_splt        = 1,
+       .vl_clor        = 1,
+       .vl_tft         = 1,
+       .vl_hpw         = 4,
+       .vl_blw         = 4,
+       .vl_elw         = 8,
+       .vl_vpw         = 4,
+       .vl_bfw         = 4,
+       .vl_efw         = 8,
+};
+#endif /* CONFIG_LMS283GF05 */
+
+/*----------------------------------------------------------------------*/
+
+#ifdef CONFIG_ACX517AKN
+
+# define LCD_BPP       LCD_COLOR8
+
+/* you have to set lccr0 and lccr3 (including pcd) */
+# define REG_LCCR0     0x003008f9
+# define REG_LCCR3     0x03700006
+
+vidinfo_t panel_info = {
+       .vl_col         = 320,
+       .vl_row         = 320,
+       .vl_width       = 320,
+       .vl_height      = 320,
+       .vl_clkp        = CONFIG_SYS_HIGH,
+       .vl_oep         = CONFIG_SYS_LOW,
+       .vl_hsp         = CONFIG_SYS_LOW,
+       .vl_vsp         = CONFIG_SYS_LOW,
+       .vl_dp          = CONFIG_SYS_HIGH,
+       .vl_bpix        = LCD_BPP,
+       .vl_lbw         = 0,
+       .vl_splt        = 1,
+       .vl_clor        = 1,
+       .vl_tft         = 1,
+       .vl_hpw         = 0x04,
+       .vl_blw         = 0x1c,
+       .vl_elw         = 0x08,
+       .vl_vpw         = 0x01,
+       .vl_bfw         = 0x07,
+       .vl_efw         = 0x08,
+};
+#endif /* CONFIG_ACX517AKN */
+
+#ifdef CONFIG_ACX544AKN
+
+# define LCD_BPP       LCD_COLOR16
+
+/* you have to set lccr0 and lccr3 (including pcd) */
+# define REG_LCCR0     0x003008f9
+# define REG_LCCR3     0x04700007 /* 16bpp */
+
+vidinfo_t panel_info = {
+       .vl_col         = 320,
+       .vl_row         = 320,
+       .vl_width       = 320,
+       .vl_height      = 320,
+       .vl_clkp        = CONFIG_SYS_LOW,
+       .vl_oep         = CONFIG_SYS_LOW,
+       .vl_hsp         = CONFIG_SYS_LOW,
+       .vl_vsp         = CONFIG_SYS_LOW,
+       .vl_dp          = CONFIG_SYS_LOW,
+       .vl_bpix        = LCD_BPP,
+       .vl_lbw         = 0,
+       .vl_splt        = 0,
+       .vl_clor        = 1,
+       .vl_tft         = 1,
+       .vl_hpw         = 0x05,
+       .vl_blw         = 0x13,
+       .vl_elw         = 0x08,
+       .vl_vpw         = 0x02,
+       .vl_bfw         = 0x07,
+       .vl_efw         = 0x05,
+};
+#endif /* CONFIG_ACX544AKN */
+
+/*----------------------------------------------------------------------*/
+
+#ifdef CONFIG_LQ038J7DH53
+
+# define LCD_BPP       LCD_COLOR8
+
+/* you have to set lccr0 and lccr3 (including pcd) */
+# define REG_LCCR0     0x003008f9
+# define REG_LCCR3     0x03700004
+
+vidinfo_t panel_info = {
+       .vl_col         = 320,
+       .vl_row         = 480,
+       .vl_width       = 320,
+       .vl_height      = 480,
+       .vl_clkp        = CONFIG_SYS_HIGH,
+       .vl_oep         = CONFIG_SYS_LOW,
+       .vl_hsp         = CONFIG_SYS_LOW,
+       .vl_vsp         = CONFIG_SYS_LOW,
+       .vl_dp          = CONFIG_SYS_HIGH,
+       .vl_bpix        = LCD_BPP,
+       .vl_lbw         = 0,
+       .vl_splt        = 1,
+       .vl_clor        = 1,
+       .vl_tft         = 1,
+       .vl_hpw         = 0x04,
+       .vl_blw         = 0x20,
+       .vl_elw         = 0x01,
+       .vl_vpw         = 0x01,
+       .vl_bfw         = 0x04,
+       .vl_efw         = 0x01,
+};
+#endif /* CONFIG_ACX517AKN */
+
+/*----------------------------------------------------------------------*/
+
+#ifdef CONFIG_LITTLETON_LCD
+# define LCD_BPP       LCD_COLOR8
+
+/* you have to set lccr0 and lccr3 (including pcd) */
+# define REG_LCCR0     0x003008f8
+# define REG_LCCR3     0x0300FF04
+
+vidinfo_t panel_info = {
+       .vl_col         = 480,
+       .vl_row         = 640,
+       .vl_width       = 480,
+       .vl_height      = 640,
+       .vl_clkp        = CONFIG_SYS_HIGH,
+       .vl_oep         = CONFIG_SYS_HIGH,
+       .vl_hsp         = CONFIG_SYS_HIGH,
+       .vl_vsp         = CONFIG_SYS_HIGH,
+       .vl_dp          = CONFIG_SYS_HIGH,
+       .vl_bpix        = LCD_BPP,
+       .vl_lbw         = 0,
+       .vl_splt        = 0,
+       .vl_clor        = 0,
+       .vl_tft         = 1,
+       .vl_hpw         = 9,
+       .vl_blw         = 8,
+       .vl_elw         = 24,
+       .vl_vpw         = 2,
+       .vl_bfw         = 2,
+       .vl_efw         = 4,
+};
+#endif /* CONFIG_LITTLETON_LCD */
+
+/*----------------------------------------------------------------------*/
+
+static int pxafb_init_mem (void *lcdbase, vidinfo_t *vid);
+static void pxafb_setup_gpio (vidinfo_t *vid);
+static void pxafb_enable_controller (vidinfo_t *vid);
+static int pxafb_init (vidinfo_t *vid);
+
+/************************************************************************/
+/* ---------------  PXA chipset specific functions  ------------------- */
+/************************************************************************/
+
+void lcd_ctrl_init (void *lcdbase)
+{
+       pxafb_init_mem(lcdbase, &panel_info);
+       pxafb_init(&panel_info);
+       pxafb_setup_gpio(&panel_info);
+       pxafb_enable_controller(&panel_info);
+}
+
+/*----------------------------------------------------------------------*/
+#if LCD_BPP == LCD_COLOR8
+void
+lcd_setcolreg (ushort regno, ushort red, ushort green, ushort blue)
+{
+       struct pxafb_info *fbi = &panel_info.pxa;
+       unsigned short *palette = (unsigned short *)fbi->palette;
+       u_int val;
+
+       if (regno < fbi->palette_size) {
+               val = ((red << 8) & 0xf800);
+               val |= ((green << 4) & 0x07e0);
+               val |= (blue & 0x001f);
+
+#ifdef LCD_INVERT_COLORS
+               palette[regno] = ~val;
+#else
+               palette[regno] = val;
+#endif
+       }
+
+       debug ("setcolreg: reg %2d @ %p: R=%02X G=%02X B=%02X => %04X\n",
+               regno, &palette[regno],
+               red, green, blue,
+               palette[regno]);
+}
+#endif /* LCD_COLOR8 */
+
+/*----------------------------------------------------------------------*/
+#if LCD_BPP == LCD_MONOCHROME
+void lcd_initcolregs (void)
+{
+       struct pxafb_info *fbi = &panel_info.pxa;
+       cmap = (ushort *)fbi->palette;
+       ushort regno;
+
+       for (regno = 0; regno < 16; regno++) {
+               cmap[regno * 2] = 0;
+               cmap[(regno * 2) + 1] = regno & 0x0f;
+       }
+}
+#endif /* LCD_MONOCHROME */
+
+/*----------------------------------------------------------------------*/
+__weak void lcd_enable(void)
+{
+}
+
+/************************************************************************/
+/* ** PXA255 specific routines                                         */
+/************************************************************************/
+
+/*
+ * Calculate fb size for VIDEOLFB_ATAG. Size returned contains fb,
+ * descriptors and palette areas.
+ */
+ulong calc_fbsize (void)
+{
+       ulong size;
+       int line_length = (panel_info.vl_col * NBITS (panel_info.vl_bpix)) / 8;
+
+       size = line_length * panel_info.vl_row;
+       size += PAGE_SIZE;
+
+       return size;
+}
+
+static int pxafb_init_mem (void *lcdbase, vidinfo_t *vid)
+{
+       u_long palette_mem_size;
+       struct pxafb_info *fbi = &vid->pxa;
+       int fb_size = vid->vl_row * (vid->vl_col * NBITS (vid->vl_bpix)) / 8;
+
+       fbi->screen = (u_long)lcdbase;
+
+       fbi->palette_size = NBITS(vid->vl_bpix) == 8 ? 256 : 16;
+       palette_mem_size = fbi->palette_size * sizeof(u16);
+
+       debug("palette_mem_size = 0x%08lx\n", (u_long) palette_mem_size);
+       /* locate palette and descs at end of page following fb */
+       fbi->palette = (u_long)lcdbase + fb_size + PAGE_SIZE - palette_mem_size;
+
+       return 0;
+}
+#ifdef CONFIG_CPU_MONAHANS
+static inline void pxafb_setup_gpio (vidinfo_t *vid) {}
+#else
+static void pxafb_setup_gpio (vidinfo_t *vid)
+{
+       u_long lccr0;
+
+       /*
+        * setup is based on type of panel supported
+        */
+
+       lccr0 = vid->pxa.reg_lccr0;
+
+       /* 4 bit interface */
+       if ((lccr0 & LCCR0_CMS) && (lccr0 & LCCR0_SDS) && !(lccr0 & LCCR0_DPD))
+       {
+               debug("Setting GPIO for 4 bit data\n");
+               /* bits 58-61 */
+               writel(readl(GPDR1) | (0xf << 26), GPDR1);
+               writel((readl(GAFR1_U) & ~(0xff << 20)) | (0xaa << 20),
+                       GAFR1_U);
+
+               /* bits 74-77 */
+               writel(readl(GPDR2) | (0xf << 10), GPDR2);
+               writel((readl(GAFR2_L) & ~(0xff << 20)) | (0xaa << 20),
+                       GAFR2_L);
+       }
+
+       /* 8 bit interface */
+       else if (((lccr0 & LCCR0_CMS) && ((lccr0 & LCCR0_SDS) || (lccr0 & LCCR0_DPD))) ||
+               (!(lccr0 & LCCR0_CMS) && !(lccr0 & LCCR0_PAS) && !(lccr0 & LCCR0_SDS)))
+       {
+               debug("Setting GPIO for 8 bit data\n");
+               /* bits 58-65 */
+               writel(readl(GPDR1) | (0x3f << 26), GPDR1);
+               writel(readl(GPDR2) | (0x3), GPDR2);
+
+               writel((readl(GAFR1_U) & ~(0xfff << 20)) | (0xaaa << 20),
+                       GAFR1_U);
+               writel((readl(GAFR2_L) & ~0xf) | (0xa), GAFR2_L);
+
+               /* bits 74-77 */
+               writel(readl(GPDR2) | (0xf << 10), GPDR2);
+               writel((readl(GAFR2_L) & ~(0xff << 20)) | (0xaa << 20),
+                       GAFR2_L);
+       }
+
+       /* 16 bit interface */
+       else if (!(lccr0 & LCCR0_CMS) && ((lccr0 & LCCR0_SDS) || (lccr0 & LCCR0_PAS)))
+       {
+               debug("Setting GPIO for 16 bit data\n");
+               /* bits 58-77 */
+               writel(readl(GPDR1) | (0x3f << 26), GPDR1);
+               writel(readl(GPDR2) | 0x00003fff, GPDR2);
+
+               writel((readl(GAFR1_U) & ~(0xfff << 20)) | (0xaaa << 20),
+                       GAFR1_U);
+               writel((readl(GAFR2_L) & 0xf0000000) | 0x0aaaaaaa, GAFR2_L);
+       }
+       else
+       {
+               printf("pxafb_setup_gpio: unable to determine bits per pixel\n");
+       }
+}
+#endif
+
+static void pxafb_enable_controller (vidinfo_t *vid)
+{
+       debug("Enabling LCD controller\n");
+
+       /* Sequence from 11.7.10 */
+       writel(vid->pxa.reg_lccr3, LCCR3);
+       writel(vid->pxa.reg_lccr2, LCCR2);
+       writel(vid->pxa.reg_lccr1, LCCR1);
+       writel(vid->pxa.reg_lccr0 & ~LCCR0_ENB, LCCR0);
+       writel(vid->pxa.fdadr0, FDADR0);
+       writel(vid->pxa.fdadr1, FDADR1);
+       writel(readl(LCCR0) | LCCR0_ENB, LCCR0);
+
+#ifdef CONFIG_CPU_MONAHANS
+       writel(readl(CKENA) | CKENA_1_LCD, CKENA);
+#else
+       writel(readl(CKEN) | CKEN16_LCD, CKEN);
+#endif
+
+       debug("FDADR0 = 0x%08x\n", readl(FDADR0));
+       debug("FDADR1 = 0x%08x\n", readl(FDADR1));
+       debug("LCCR0 = 0x%08x\n", readl(LCCR0));
+       debug("LCCR1 = 0x%08x\n", readl(LCCR1));
+       debug("LCCR2 = 0x%08x\n", readl(LCCR2));
+       debug("LCCR3 = 0x%08x\n", readl(LCCR3));
+}
+
+static int pxafb_init (vidinfo_t *vid)
+{
+       struct pxafb_info *fbi = &vid->pxa;
+
+       debug("Configuring PXA LCD\n");
+
+       fbi->reg_lccr0 = REG_LCCR0;
+       fbi->reg_lccr3 = REG_LCCR3;
+
+       debug("vid: vl_col=%d hslen=%d lm=%d rm=%d\n",
+               vid->vl_col, vid->vl_hpw,
+               vid->vl_blw, vid->vl_elw);
+       debug("vid: vl_row=%d vslen=%d um=%d bm=%d\n",
+               vid->vl_row, vid->vl_vpw,
+               vid->vl_bfw, vid->vl_efw);
+
+       fbi->reg_lccr1 =
+               LCCR1_DisWdth(vid->vl_col) +
+               LCCR1_HorSnchWdth(vid->vl_hpw) +
+               LCCR1_BegLnDel(vid->vl_blw) +
+               LCCR1_EndLnDel(vid->vl_elw);
+
+       fbi->reg_lccr2 =
+               LCCR2_DisHght(vid->vl_row) +
+               LCCR2_VrtSnchWdth(vid->vl_vpw) +
+               LCCR2_BegFrmDel(vid->vl_bfw) +
+               LCCR2_EndFrmDel(vid->vl_efw);
+
+       fbi->reg_lccr3 = REG_LCCR3 & ~(LCCR3_HSP | LCCR3_VSP);
+       fbi->reg_lccr3 |= (vid->vl_hsp ? LCCR3_HorSnchL : LCCR3_HorSnchH)
+                       | (vid->vl_vsp ? LCCR3_VrtSnchL : LCCR3_VrtSnchH);
+
+
+       /* setup dma descriptors */
+       fbi->dmadesc_fblow = (struct pxafb_dma_descriptor *)((unsigned int)fbi->palette - 3*16);
+       fbi->dmadesc_fbhigh = (struct pxafb_dma_descriptor *)((unsigned int)fbi->palette - 2*16);
+       fbi->dmadesc_palette = (struct pxafb_dma_descriptor *)((unsigned int)fbi->palette - 1*16);
+
+       #define BYTES_PER_PANEL ((fbi->reg_lccr0 & LCCR0_SDS) ? \
+               (vid->vl_col * vid->vl_row * NBITS(vid->vl_bpix) / 8 / 2) : \
+               (vid->vl_col * vid->vl_row * NBITS(vid->vl_bpix) / 8))
+
+       /* populate descriptors */
+       fbi->dmadesc_fblow->fdadr = (u_long)fbi->dmadesc_fblow;
+       fbi->dmadesc_fblow->fsadr = fbi->screen + BYTES_PER_PANEL;
+       fbi->dmadesc_fblow->fidr  = 0;
+       fbi->dmadesc_fblow->ldcmd = BYTES_PER_PANEL;
+
+       fbi->fdadr1 = (u_long)fbi->dmadesc_fblow; /* only used in dual-panel mode */
+
+       fbi->dmadesc_fbhigh->fsadr = fbi->screen;
+       fbi->dmadesc_fbhigh->fidr = 0;
+       fbi->dmadesc_fbhigh->ldcmd = BYTES_PER_PANEL;
+
+       fbi->dmadesc_palette->fsadr = fbi->palette;
+       fbi->dmadesc_palette->fidr  = 0;
+       fbi->dmadesc_palette->ldcmd = (fbi->palette_size * 2) | LDCMD_PAL;
+
+       if( NBITS(vid->vl_bpix) < 12)
+       {
+               /* assume any mode with <12 bpp is palette driven */
+               fbi->dmadesc_palette->fdadr = (u_long)fbi->dmadesc_fbhigh;
+               fbi->dmadesc_fbhigh->fdadr = (u_long)fbi->dmadesc_palette;
+               /* flips back and forth between pal and fbhigh */
+               fbi->fdadr0 = (u_long)fbi->dmadesc_palette;
+       }
+       else
+       {
+               /* palette shouldn't be loaded in true-color mode */
+               fbi->dmadesc_fbhigh->fdadr = (u_long)fbi->dmadesc_fbhigh;
+               fbi->fdadr0 = (u_long)fbi->dmadesc_fbhigh; /* no pal just fbhigh */
+       }
+
+       debug("fbi->dmadesc_fblow = 0x%lx\n", (u_long)fbi->dmadesc_fblow);
+       debug("fbi->dmadesc_fbhigh = 0x%lx\n", (u_long)fbi->dmadesc_fbhigh);
+       debug("fbi->dmadesc_palette = 0x%lx\n", (u_long)fbi->dmadesc_palette);
+
+       debug("fbi->dmadesc_fblow->fdadr = 0x%lx\n", fbi->dmadesc_fblow->fdadr);
+       debug("fbi->dmadesc_fbhigh->fdadr = 0x%lx\n", fbi->dmadesc_fbhigh->fdadr);
+       debug("fbi->dmadesc_palette->fdadr = 0x%lx\n", fbi->dmadesc_palette->fdadr);
+
+       debug("fbi->dmadesc_fblow->fsadr = 0x%lx\n", fbi->dmadesc_fblow->fsadr);
+       debug("fbi->dmadesc_fbhigh->fsadr = 0x%lx\n", fbi->dmadesc_fbhigh->fsadr);
+       debug("fbi->dmadesc_palette->fsadr = 0x%lx\n", fbi->dmadesc_palette->fsadr);
+
+       debug("fbi->dmadesc_fblow->ldcmd = 0x%lx\n", fbi->dmadesc_fblow->ldcmd);
+       debug("fbi->dmadesc_fbhigh->ldcmd = 0x%lx\n", fbi->dmadesc_fbhigh->ldcmd);
+       debug("fbi->dmadesc_palette->ldcmd = 0x%lx\n", fbi->dmadesc_palette->ldcmd);
+
+       return 0;
+}
+
+/************************************************************************/
+/************************************************************************/
+
+#endif /* CONFIG_LCD */