Add qemu 2.4.0

[kvmfornfv.git] / qemu / roms / u-boot / drivers / usb / musb / musb_hcd.h

diff --git a/qemu/roms/u-boot/drivers/usb/musb/musb_hcd.h b/qemu/roms/u-boot/drivers/usb/musb/musb_hcd.h
new file mode 100644 (file)
index 0000000..02b9adc
--- /dev/null
+++ b/qemu/roms/u-boot/drivers/usb/musb/musb_hcd.h
@@ -0,0 +1,99 @@
+/*
+ * Mentor USB OTG Core host controller driver.
+ *
+ * Copyright (c) 2008 Texas Instruments
+ *
+ * SPDX-License-Identifier:    GPL-2.0+
+ *
+ * Author: Thomas Abraham t-abraham@ti.com, Texas Instruments
+ */
+
+#ifndef __MUSB_HCD_H__
+#define __MUSB_HCD_H__
+
+#include "musb_core.h"
+#ifdef CONFIG_USB_KEYBOARD
+#include <stdio_dev.h>
+extern unsigned char new[];
+#endif
+
+#ifndef CONFIG_MUSB_TIMEOUT
+# define CONFIG_MUSB_TIMEOUT 100000
+#endif
+
+/* This defines the endpoint number used for control transfers */
+#define MUSB_CONTROL_EP 0
+
+/* This defines the endpoint number used for bulk transfer */
+#ifndef MUSB_BULK_EP
+# define MUSB_BULK_EP 1
+#endif
+
+/* This defines the endpoint number used for interrupt transfer */
+#define MUSB_INTR_EP 2
+
+/* Determine the operating speed of MUSB core */
+#define musb_ishighspeed() \
+       ((readb(&musbr->power) & MUSB_POWER_HSMODE) \
+               >> MUSB_POWER_HSMODE_SHIFT)
+
+#define min_t(type, x, y)      \
+       ({ type __x = (x); type __y = (y); __x < __y ? __x : __y; })
+
+/* USB HUB CONSTANTS (not OHCI-specific; see hub.h) */
+
+/* destination of request */
+#define RH_INTERFACE              0x01
+#define RH_ENDPOINT               0x02
+#define RH_OTHER                  0x03
+
+#define RH_CLASS                  0x20
+#define RH_VENDOR                 0x40
+
+/* Requests: bRequest << 8 | bmRequestType */
+#define RH_GET_STATUS          0x0080
+#define RH_CLEAR_FEATURE       0x0100
+#define RH_SET_FEATURE         0x0300
+#define RH_SET_ADDRESS         0x0500
+#define RH_GET_DESCRIPTOR      0x0680
+#define RH_SET_DESCRIPTOR      0x0700
+#define RH_GET_CONFIGURATION   0x0880
+#define RH_SET_CONFIGURATION   0x0900
+#define RH_GET_STATE           0x0280
+#define RH_GET_INTERFACE       0x0A80
+#define RH_SET_INTERFACE       0x0B00
+#define RH_SYNC_FRAME          0x0C80
+/* Our Vendor Specific Request */
+#define RH_SET_EP              0x2000
+
+/* Hub port features */
+#define RH_PORT_CONNECTION        0x00
+#define RH_PORT_ENABLE            0x01
+#define RH_PORT_SUSPEND                   0x02
+#define RH_PORT_OVER_CURRENT      0x03
+#define RH_PORT_RESET             0x04
+#define RH_PORT_POWER             0x08
+#define RH_PORT_LOW_SPEED         0x09
+
+#define RH_C_PORT_CONNECTION      0x10
+#define RH_C_PORT_ENABLE          0x11
+#define RH_C_PORT_SUSPEND         0x12
+#define RH_C_PORT_OVER_CURRENT    0x13
+#define RH_C_PORT_RESET                   0x14
+
+/* Hub features */
+#define RH_C_HUB_LOCAL_POWER      0x00
+#define RH_C_HUB_OVER_CURRENT     0x01
+
+#define RH_DEVICE_REMOTE_WAKEUP           0x00
+#define RH_ENDPOINT_STALL         0x01
+
+#define RH_ACK                    0x01
+#define RH_REQ_ERR                -1
+#define RH_NACK                           0x00
+
+/* extern functions */
+extern int musb_platform_init(void);
+extern void musb_platform_deinit(void);
+
+#endif /* __MUSB_HCD_H__ */