--- /dev/null
+/******************************************************************
+ * Copyright 2008 Mentor Graphics Corporation
+ * Copyright (C) 2008 by Texas Instruments
+ *
+ * This file is part of the Inventra Controller Driver for Linux.
+ *
+ * The Inventra Controller Driver for Linux is free software; you
+ * can redistribute it and/or modify it under the terms of the GNU
+ * General Public License version 2 as published by the Free Software
+ * Foundation.
+ *
+ * The Inventra Controller Driver for Linux is distributed in
+ * the hope that it will be useful, but WITHOUT ANY WARRANTY;
+ * without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public
+ * License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with The Inventra Controller Driver for Linux ; if not,
+ * write to the Free Software Foundation, Inc., 59 Temple Place,
+ * Suite 330, Boston, MA 02111-1307 USA
+ *
+ * ANY DOWNLOAD, USE, REPRODUCTION, MODIFICATION OR DISTRIBUTION
+ * OF THIS DRIVER INDICATES YOUR COMPLETE AND UNCONDITIONAL ACCEPTANCE
+ * OF THOSE TERMS.THIS DRIVER IS PROVIDED "AS IS" AND MENTOR GRAPHICS
+ * MAKES NO WARRANTIES, EXPRESS OR IMPLIED, RELATED TO THIS DRIVER.
+ * MENTOR GRAPHICS SPECIFICALLY DISCLAIMS ALL IMPLIED WARRANTIES
+ * OF MERCHANTABILITY; FITNESS FOR A PARTICULAR PURPOSE AND
+ * NON-INFRINGEMENT. MENTOR GRAPHICS DOES NOT PROVIDE SUPPORT
+ * SERVICES OR UPDATES FOR THIS DRIVER, EVEN IF YOU ARE A MENTOR
+ * GRAPHICS SUPPORT CUSTOMER.
+ ******************************************************************/
+
+#ifndef __MUSB_HDRC_DEFS_H__
+#define __MUSB_HDRC_DEFS_H__
+
+#include <usb_defs.h>
+#include <asm/io.h>
+
+#ifdef CONFIG_USB_BLACKFIN
+# include "blackfin_usb.h"
+#endif
+
+#define MUSB_EP0_FIFOSIZE 64 /* This is non-configurable */
+
+/* EP0 */
+struct musb_ep0_regs {
+ u16 reserved4;
+ u16 csr0;
+ u16 reserved5;
+ u16 reserved6;
+ u16 count0;
+ u8 host_type0;
+ u8 host_naklimit0;
+ u8 reserved7;
+ u8 reserved8;
+ u8 reserved9;
+ u8 configdata;
+};
+
+/* EP 1-15 */
+struct musb_epN_regs {
+ u16 txmaxp;
+ u16 txcsr;
+ u16 rxmaxp;
+ u16 rxcsr;
+ u16 rxcount;
+ u8 txtype;
+ u8 txinterval;
+ u8 rxtype;
+ u8 rxinterval;
+ u8 reserved0;
+ u8 fifosize;
+};
+
+/* Mentor USB core register overlay structure */
+#ifndef musb_regs
+struct musb_regs {
+ /* common registers */
+ u8 faddr;
+ u8 power;
+ u16 intrtx;
+ u16 intrrx;
+ u16 intrtxe;
+ u16 intrrxe;
+ u8 intrusb;
+ u8 intrusbe;
+ u16 frame;
+ u8 index;
+ u8 testmode;
+ /* indexed registers */
+ u16 txmaxp;
+ u16 txcsr;
+ u16 rxmaxp;
+ u16 rxcsr;
+ u16 rxcount;
+ u8 txtype;
+ u8 txinterval;
+ u8 rxtype;
+ u8 rxinterval;
+ u8 reserved0;
+ u8 fifosize;
+ /* fifo */
+ u32 fifox[16];
+ /* OTG, dynamic FIFO, version & vendor registers */
+ u8 devctl;
+ u8 reserved1;
+ u8 txfifosz;
+ u8 rxfifosz;
+ u16 txfifoadd;
+ u16 rxfifoadd;
+ u32 vcontrol;
+ u16 hwvers;
+ u16 reserved2a[1];
+ u8 ulpi_busctl;
+ u8 reserved2b[1];
+ u16 reserved2[3];
+ u8 epinfo;
+ u8 raminfo;
+ u8 linkinfo;
+ u8 vplen;
+ u8 hseof1;
+ u8 fseof1;
+ u8 lseof1;
+ u8 reserved3;
+ /* target address registers */
+ struct musb_tar_regs {
+ u8 txfuncaddr;
+ u8 reserved0;
+ u8 txhubaddr;
+ u8 txhubport;
+ u8 rxfuncaddr;
+ u8 reserved1;
+ u8 rxhubaddr;
+ u8 rxhubport;
+ } tar[16];
+ /*
+ * endpoint registers
+ * ep0 elements are valid when array index is 0
+ * otherwise epN is valid
+ */
+ union musb_ep_regs {
+ struct musb_ep0_regs ep0;
+ struct musb_epN_regs epN;
+ } ep[16];
+
+} __attribute__((packed));
+#endif
+
+/*
+ * MUSB Register bits
+ */
+
+/* POWER */
+#define MUSB_POWER_ISOUPDATE 0x80
+#define MUSB_POWER_SOFTCONN 0x40
+#define MUSB_POWER_HSENAB 0x20
+#define MUSB_POWER_HSMODE 0x10
+#define MUSB_POWER_RESET 0x08
+#define MUSB_POWER_RESUME 0x04
+#define MUSB_POWER_SUSPENDM 0x02
+#define MUSB_POWER_ENSUSPEND 0x01
+#define MUSB_POWER_HSMODE_SHIFT 4
+
+/* INTRUSB */
+#define MUSB_INTR_SUSPEND 0x01
+#define MUSB_INTR_RESUME 0x02
+#define MUSB_INTR_RESET 0x04
+#define MUSB_INTR_BABBLE 0x04
+#define MUSB_INTR_SOF 0x08
+#define MUSB_INTR_CONNECT 0x10
+#define MUSB_INTR_DISCONNECT 0x20
+#define MUSB_INTR_SESSREQ 0x40
+#define MUSB_INTR_VBUSERROR 0x80 /* For SESSION end */
+
+/* DEVCTL */
+#define MUSB_DEVCTL_BDEVICE 0x80
+#define MUSB_DEVCTL_FSDEV 0x40
+#define MUSB_DEVCTL_LSDEV 0x20
+#define MUSB_DEVCTL_VBUS 0x18
+#define MUSB_DEVCTL_VBUS_SHIFT 3
+#define MUSB_DEVCTL_HM 0x04
+#define MUSB_DEVCTL_HR 0x02
+#define MUSB_DEVCTL_SESSION 0x01
+
+/* ULPI VBUSCONTROL */
+#define ULPI_USE_EXTVBUS 0x01
+#define ULPI_USE_EXTVBUSIND 0x02
+
+/* TESTMODE */
+#define MUSB_TEST_FORCE_HOST 0x80
+#define MUSB_TEST_FIFO_ACCESS 0x40
+#define MUSB_TEST_FORCE_FS 0x20
+#define MUSB_TEST_FORCE_HS 0x10
+#define MUSB_TEST_PACKET 0x08
+#define MUSB_TEST_K 0x04
+#define MUSB_TEST_J 0x02
+#define MUSB_TEST_SE0_NAK 0x01
+
+/* Allocate for double-packet buffering (effectively doubles assigned _SIZE) */
+#define MUSB_FIFOSZ_DPB 0x10
+/* Allocation size (8, 16, 32, ... 4096) */
+#define MUSB_FIFOSZ_SIZE 0x0f
+
+/* CSR0 */
+#define MUSB_CSR0_FLUSHFIFO 0x0100
+#define MUSB_CSR0_TXPKTRDY 0x0002
+#define MUSB_CSR0_RXPKTRDY 0x0001
+
+/* CSR0 in Peripheral mode */
+#define MUSB_CSR0_P_SVDSETUPEND 0x0080
+#define MUSB_CSR0_P_SVDRXPKTRDY 0x0040
+#define MUSB_CSR0_P_SENDSTALL 0x0020
+#define MUSB_CSR0_P_SETUPEND 0x0010
+#define MUSB_CSR0_P_DATAEND 0x0008
+#define MUSB_CSR0_P_SENTSTALL 0x0004
+
+/* CSR0 in Host mode */
+#define MUSB_CSR0_H_DIS_PING 0x0800
+#define MUSB_CSR0_H_WR_DATATOGGLE 0x0400 /* Set to allow setting: */
+#define MUSB_CSR0_H_DATATOGGLE 0x0200 /* Data toggle control */
+#define MUSB_CSR0_H_NAKTIMEOUT 0x0080
+#define MUSB_CSR0_H_STATUSPKT 0x0040
+#define MUSB_CSR0_H_REQPKT 0x0020
+#define MUSB_CSR0_H_ERROR 0x0010
+#define MUSB_CSR0_H_SETUPPKT 0x0008
+#define MUSB_CSR0_H_RXSTALL 0x0004
+
+/* CSR0 bits to avoid zeroing (write zero clears, write 1 ignored) */
+#define MUSB_CSR0_P_WZC_BITS \
+ (MUSB_CSR0_P_SENTSTALL)
+#define MUSB_CSR0_H_WZC_BITS \
+ (MUSB_CSR0_H_NAKTIMEOUT | MUSB_CSR0_H_RXSTALL \
+ | MUSB_CSR0_RXPKTRDY)
+
+/* TxType/RxType */
+#define MUSB_TYPE_SPEED 0xc0
+#define MUSB_TYPE_SPEED_SHIFT 6
+#define MUSB_TYPE_SPEED_HIGH 1
+#define MUSB_TYPE_SPEED_FULL 2
+#define MUSB_TYPE_SPEED_LOW 3
+#define MUSB_TYPE_PROTO 0x30 /* Implicitly zero for ep0 */
+#define MUSB_TYPE_PROTO_SHIFT 4
+#define MUSB_TYPE_REMOTE_END 0xf /* Implicitly zero for ep0 */
+#define MUSB_TYPE_PROTO_BULK 2
+#define MUSB_TYPE_PROTO_INTR 3
+
+/* CONFIGDATA */
+#define MUSB_CONFIGDATA_MPRXE 0x80 /* Auto bulk pkt combining */
+#define MUSB_CONFIGDATA_MPTXE 0x40 /* Auto bulk pkt splitting */
+#define MUSB_CONFIGDATA_BIGENDIAN 0x20
+#define MUSB_CONFIGDATA_HBRXE 0x10 /* HB-ISO for RX */
+#define MUSB_CONFIGDATA_HBTXE 0x08 /* HB-ISO for TX */
+#define MUSB_CONFIGDATA_DYNFIFO 0x04 /* Dynamic FIFO sizing */
+#define MUSB_CONFIGDATA_SOFTCONE 0x02 /* SoftConnect */
+#define MUSB_CONFIGDATA_UTMIDW 0x01 /* Data width 0/1 => 8/16bits */
+
+/* TXCSR in Peripheral and Host mode */
+#define MUSB_TXCSR_AUTOSET 0x8000
+#define MUSB_TXCSR_MODE 0x2000
+#define MUSB_TXCSR_DMAENAB 0x1000
+#define MUSB_TXCSR_FRCDATATOG 0x0800
+#define MUSB_TXCSR_DMAMODE 0x0400
+#define MUSB_TXCSR_CLRDATATOG 0x0040
+#define MUSB_TXCSR_FLUSHFIFO 0x0008
+#define MUSB_TXCSR_FIFONOTEMPTY 0x0002
+#define MUSB_TXCSR_TXPKTRDY 0x0001
+
+/* TXCSR in Peripheral mode */
+#define MUSB_TXCSR_P_ISO 0x4000
+#define MUSB_TXCSR_P_INCOMPTX 0x0080
+#define MUSB_TXCSR_P_SENTSTALL 0x0020
+#define MUSB_TXCSR_P_SENDSTALL 0x0010
+#define MUSB_TXCSR_P_UNDERRUN 0x0004
+
+/* TXCSR in Host mode */
+#define MUSB_TXCSR_H_WR_DATATOGGLE 0x0200
+#define MUSB_TXCSR_H_DATATOGGLE 0x0100
+#define MUSB_TXCSR_H_NAKTIMEOUT 0x0080
+#define MUSB_TXCSR_H_RXSTALL 0x0020
+#define MUSB_TXCSR_H_ERROR 0x0004
+#define MUSB_TXCSR_H_DATATOGGLE_SHIFT 8
+
+/* TXCSR bits to avoid zeroing (write zero clears, write 1 ignored) */
+#define MUSB_TXCSR_P_WZC_BITS \
+ (MUSB_TXCSR_P_INCOMPTX | MUSB_TXCSR_P_SENTSTALL \
+ | MUSB_TXCSR_P_UNDERRUN | MUSB_TXCSR_FIFONOTEMPTY)
+#define MUSB_TXCSR_H_WZC_BITS \
+ (MUSB_TXCSR_H_NAKTIMEOUT | MUSB_TXCSR_H_RXSTALL \
+ | MUSB_TXCSR_H_ERROR | MUSB_TXCSR_FIFONOTEMPTY)
+
+/* RXCSR in Peripheral and Host mode */
+#define MUSB_RXCSR_AUTOCLEAR 0x8000
+#define MUSB_RXCSR_DMAENAB 0x2000
+#define MUSB_RXCSR_DISNYET 0x1000
+#define MUSB_RXCSR_PID_ERR 0x1000
+#define MUSB_RXCSR_DMAMODE 0x0800
+#define MUSB_RXCSR_INCOMPRX 0x0100
+#define MUSB_RXCSR_CLRDATATOG 0x0080
+#define MUSB_RXCSR_FLUSHFIFO 0x0010
+#define MUSB_RXCSR_DATAERROR 0x0008
+#define MUSB_RXCSR_FIFOFULL 0x0002
+#define MUSB_RXCSR_RXPKTRDY 0x0001
+
+/* RXCSR in Peripheral mode */
+#define MUSB_RXCSR_P_ISO 0x4000
+#define MUSB_RXCSR_P_SENTSTALL 0x0040
+#define MUSB_RXCSR_P_SENDSTALL 0x0020
+#define MUSB_RXCSR_P_OVERRUN 0x0004
+
+/* RXCSR in Host mode */
+#define MUSB_RXCSR_H_AUTOREQ 0x4000
+#define MUSB_RXCSR_H_WR_DATATOGGLE 0x0400
+#define MUSB_RXCSR_H_DATATOGGLE 0x0200
+#define MUSB_RXCSR_H_RXSTALL 0x0040
+#define MUSB_RXCSR_H_REQPKT 0x0020
+#define MUSB_RXCSR_H_ERROR 0x0004
+#define MUSB_S_RXCSR_H_DATATOGGLE 9
+
+/* RXCSR bits to avoid zeroing (write zero clears, write 1 ignored) */
+#define MUSB_RXCSR_P_WZC_BITS \
+ (MUSB_RXCSR_P_SENTSTALL | MUSB_RXCSR_P_OVERRUN \
+ | MUSB_RXCSR_RXPKTRDY)
+#define MUSB_RXCSR_H_WZC_BITS \
+ (MUSB_RXCSR_H_RXSTALL | MUSB_RXCSR_H_ERROR \
+ | MUSB_RXCSR_DATAERROR | MUSB_RXCSR_RXPKTRDY)
+
+/* HUBADDR */
+#define MUSB_HUBADDR_MULTI_TT 0x80
+
+/* Endpoint configuration information. Note: The value of endpoint fifo size
+ * element should be either 8,16,32,64,128,256,512,1024,2048 or 4096. Other
+ * values are not supported
+ */
+struct musb_epinfo {
+ u8 epnum; /* endpoint number */
+ u8 epdir; /* endpoint direction */
+ u16 epsize; /* endpoint FIFO size */
+};
+
+/*
+ * Platform specific MUSB configuration. Any platform using the musb
+ * functionality should create one instance of this structure in the
+ * platform specific file.
+ */
+struct musb_config {
+ struct musb_regs *regs;
+ u32 timeout;
+ u8 musb_speed;
+ u8 extvbus;
+};
+
+/* externally defined data */
+extern struct musb_config musb_cfg;
+extern struct musb_regs *musbr;
+
+/* exported functions */
+extern void musb_start(void);
+extern void musb_configure_ep(const struct musb_epinfo *epinfo, u8 cnt);
+extern void write_fifo(u8 ep, u32 length, void *fifo_data);
+extern void read_fifo(u8 ep, u32 length, void *fifo_data);
+
+#if defined(CONFIG_USB_BLACKFIN)
+/* Every USB register is accessed as a 16-bit even if the value itself
+ * is only 8-bits in size. Fun stuff.
+ */
+# undef readb
+# define readb(addr) (u8)bfin_read16(addr)
+# undef writeb
+# define writeb(b, addr) bfin_write16(addr, b)
+# undef MUSB_TXCSR_MODE /* not supported */
+# define MUSB_TXCSR_MODE 0
+/*
+ * The USB PHY on current Blackfin processors is a UTMI+ level 2 PHY.
+ * However, it has no ULPI support - so there are no registers at all.
+ * That means accesses to ULPI_BUSCONTROL have to be abstracted away.
+ */
+static inline u8 musb_read_ulpi_buscontrol(struct musb_regs *musbr)
+{
+ return 0;
+}
+static inline void musb_write_ulpi_buscontrol(struct musb_regs *musbr, u8 val)
+{}
+#else
+static inline u8 musb_read_ulpi_buscontrol(struct musb_regs *musbr)
+{
+ return readb(&musbr->ulpi_busctl);
+}
+static inline void musb_write_ulpi_buscontrol(struct musb_regs *musbr, u8 val)
+{
+ writeb(val, &musbr->ulpi_busctl);
+}
+#endif
+
+#endif /* __MUSB_HDRC_DEFS_H__ */
Code Review / kvmfornfv.git / blobdiff