--- /dev/null
+/*
+ * Copyright (c) 2009 Daniel Mack <daniel@caiaq.de>
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+
+#include <common.h>
+#include <usb.h>
+#include <asm/io.h>
+#include <asm/arch/imx-regs.h>
+#include <usb/ehci-fsl.h>
+#include <errno.h>
+
+#include "ehci.h"
+
+#define USBCTRL_OTGBASE_OFFSET 0x600
+
+#define MX25_OTG_SIC_SHIFT 29
+#define MX25_OTG_SIC_MASK (0x3 << MX25_OTG_SIC_SHIFT)
+#define MX25_OTG_PM_BIT (1 << 24)
+#define MX25_OTG_PP_BIT (1 << 11)
+#define MX25_OTG_OCPOL_BIT (1 << 3)
+
+#define MX25_H1_SIC_SHIFT 21
+#define MX25_H1_SIC_MASK (0x3 << MX25_H1_SIC_SHIFT)
+#define MX25_H1_PP_BIT (1 << 18)
+#define MX25_H1_PM_BIT (1 << 16)
+#define MX25_H1_IPPUE_UP_BIT (1 << 7)
+#define MX25_H1_IPPUE_DOWN_BIT (1 << 6)
+#define MX25_H1_TLL_BIT (1 << 5)
+#define MX25_H1_USBTE_BIT (1 << 4)
+#define MX25_H1_OCPOL_BIT (1 << 2)
+
+#define MX31_OTG_SIC_SHIFT 29
+#define MX31_OTG_SIC_MASK (0x3 << MX31_OTG_SIC_SHIFT)
+#define MX31_OTG_PM_BIT (1 << 24)
+
+#define MX31_H2_SIC_SHIFT 21
+#define MX31_H2_SIC_MASK (0x3 << MX31_H2_SIC_SHIFT)
+#define MX31_H2_PM_BIT (1 << 16)
+#define MX31_H2_DT_BIT (1 << 5)
+
+#define MX31_H1_SIC_SHIFT 13
+#define MX31_H1_SIC_MASK (0x3 << MX31_H1_SIC_SHIFT)
+#define MX31_H1_PM_BIT (1 << 8)
+#define MX31_H1_DT_BIT (1 << 4)
+
+#define MX35_OTG_SIC_SHIFT 29
+#define MX35_OTG_SIC_MASK (0x3 << MX35_OTG_SIC_SHIFT)
+#define MX35_OTG_PM_BIT (1 << 24)
+#define MX35_OTG_PP_BIT (1 << 11)
+#define MX35_OTG_OCPOL_BIT (1 << 3)
+
+#define MX35_H1_SIC_SHIFT 21
+#define MX35_H1_SIC_MASK (0x3 << MX35_H1_SIC_SHIFT)
+#define MX35_H1_PP_BIT (1 << 18)
+#define MX35_H1_PM_BIT (1 << 16)
+#define MX35_H1_IPPUE_UP_BIT (1 << 7)
+#define MX35_H1_IPPUE_DOWN_BIT (1 << 6)
+#define MX35_H1_TLL_BIT (1 << 5)
+#define MX35_H1_USBTE_BIT (1 << 4)
+#define MX35_H1_OCPOL_BIT (1 << 2)
+
+static int mxc_set_usbcontrol(int port, unsigned int flags)
+{
+ unsigned int v;
+
+ v = readl(IMX_USB_BASE + USBCTRL_OTGBASE_OFFSET);
+#if defined(CONFIG_MX25)
+ switch (port) {
+ case 0: /* OTG port */
+ v &= ~(MX25_OTG_SIC_MASK | MX25_OTG_PM_BIT | MX25_OTG_PP_BIT |
+ MX25_OTG_OCPOL_BIT);
+ v |= (flags & MXC_EHCI_INTERFACE_MASK) << MX25_OTG_SIC_SHIFT;
+
+ if (!(flags & MXC_EHCI_POWER_PINS_ENABLED))
+ v |= MX25_OTG_PM_BIT;
+
+ if (flags & MXC_EHCI_PWR_PIN_ACTIVE_HIGH)
+ v |= MX25_OTG_PP_BIT;
+
+ if (!(flags & MXC_EHCI_OC_PIN_ACTIVE_LOW))
+ v |= MX25_OTG_OCPOL_BIT;
+
+ break;
+ case 1: /* H1 port */
+ v &= ~(MX25_H1_SIC_MASK | MX25_H1_PM_BIT | MX25_H1_PP_BIT |
+ MX25_H1_OCPOL_BIT | MX25_H1_TLL_BIT |
+ MX25_H1_USBTE_BIT | MX25_H1_IPPUE_DOWN_BIT |
+ MX25_H1_IPPUE_UP_BIT);
+ v |= (flags & MXC_EHCI_INTERFACE_MASK) << MX25_H1_SIC_SHIFT;
+
+ if (!(flags & MXC_EHCI_POWER_PINS_ENABLED))
+ v |= MX25_H1_PM_BIT;
+
+ if (flags & MXC_EHCI_PWR_PIN_ACTIVE_HIGH)
+ v |= MX25_H1_PP_BIT;
+
+ if (!(flags & MXC_EHCI_OC_PIN_ACTIVE_LOW))
+ v |= MX25_H1_OCPOL_BIT;
+
+ if (!(flags & MXC_EHCI_TTL_ENABLED))
+ v |= MX25_H1_TLL_BIT;
+
+ if (flags & MXC_EHCI_INTERNAL_PHY)
+ v |= MX25_H1_USBTE_BIT;
+
+ if (flags & MXC_EHCI_IPPUE_DOWN)
+ v |= MX25_H1_IPPUE_DOWN_BIT;
+
+ if (flags & MXC_EHCI_IPPUE_UP)
+ v |= MX25_H1_IPPUE_UP_BIT;
+
+ break;
+ default:
+ return -EINVAL;
+ }
+#elif defined(CONFIG_MX31)
+ switch (port) {
+ case 0: /* OTG port */
+ v &= ~(MX31_OTG_SIC_MASK | MX31_OTG_PM_BIT);
+ v |= (flags & MXC_EHCI_INTERFACE_MASK) << MX31_OTG_SIC_SHIFT;
+
+ if (!(flags & MXC_EHCI_POWER_PINS_ENABLED))
+ v |= MX31_OTG_PM_BIT;
+
+ break;
+ case 1: /* H1 port */
+ v &= ~(MX31_H1_SIC_MASK | MX31_H1_PM_BIT | MX31_H1_DT_BIT);
+ v |= (flags & MXC_EHCI_INTERFACE_MASK) << MX31_H1_SIC_SHIFT;
+
+ if (!(flags & MXC_EHCI_POWER_PINS_ENABLED))
+ v |= MX31_H1_PM_BIT;
+
+ if (!(flags & MXC_EHCI_TTL_ENABLED))
+ v |= MX31_H1_DT_BIT;
+
+ break;
+ case 2: /* H2 port */
+ v &= ~(MX31_H2_SIC_MASK | MX31_H2_PM_BIT | MX31_H2_DT_BIT);
+ v |= (flags & MXC_EHCI_INTERFACE_MASK) << MX31_H2_SIC_SHIFT;
+
+ if (!(flags & MXC_EHCI_POWER_PINS_ENABLED))
+ v |= MX31_H2_PM_BIT;
+
+ if (!(flags & MXC_EHCI_TTL_ENABLED))
+ v |= MX31_H2_DT_BIT;
+
+ break;
+ default:
+ return -EINVAL;
+ }
+#elif defined(CONFIG_MX35)
+ switch (port) {
+ case 0: /* OTG port */
+ v &= ~(MX35_OTG_SIC_MASK | MX35_OTG_PM_BIT | MX35_OTG_PP_BIT |
+ MX35_OTG_OCPOL_BIT);
+ v |= (flags & MXC_EHCI_INTERFACE_MASK) << MX35_OTG_SIC_SHIFT;
+
+ if (!(flags & MXC_EHCI_POWER_PINS_ENABLED))
+ v |= MX35_OTG_PM_BIT;
+
+ if (flags & MXC_EHCI_PWR_PIN_ACTIVE_HIGH)
+ v |= MX35_OTG_PP_BIT;
+
+ if (!(flags & MXC_EHCI_OC_PIN_ACTIVE_LOW))
+ v |= MX35_OTG_OCPOL_BIT;
+
+ break;
+ case 1: /* H1 port */
+ v &= ~(MX35_H1_SIC_MASK | MX35_H1_PM_BIT | MX35_H1_PP_BIT |
+ MX35_H1_OCPOL_BIT | MX35_H1_TLL_BIT |
+ MX35_H1_USBTE_BIT | MX35_H1_IPPUE_DOWN_BIT |
+ MX35_H1_IPPUE_UP_BIT);
+ v |= (flags & MXC_EHCI_INTERFACE_MASK) << MX35_H1_SIC_SHIFT;
+
+ if (!(flags & MXC_EHCI_POWER_PINS_ENABLED))
+ v |= MX35_H1_PM_BIT;
+
+ if (flags & MXC_EHCI_PWR_PIN_ACTIVE_HIGH)
+ v |= MX35_H1_PP_BIT;
+
+ if (!(flags & MXC_EHCI_OC_PIN_ACTIVE_LOW))
+ v |= MX35_H1_OCPOL_BIT;
+
+ if (!(flags & MXC_EHCI_TTL_ENABLED))
+ v |= MX35_H1_TLL_BIT;
+
+ if (flags & MXC_EHCI_INTERNAL_PHY)
+ v |= MX35_H1_USBTE_BIT;
+
+ if (flags & MXC_EHCI_IPPUE_DOWN)
+ v |= MX35_H1_IPPUE_DOWN_BIT;
+
+ if (flags & MXC_EHCI_IPPUE_UP)
+ v |= MX35_H1_IPPUE_UP_BIT;
+
+ break;
+ default:
+ return -EINVAL;
+ }
+#else
+#error MXC EHCI USB driver not supported on this platform
+#endif
+ writel(v, IMX_USB_BASE + USBCTRL_OTGBASE_OFFSET);
+
+ return 0;
+}
+
+int ehci_hcd_init(int index, enum usb_init_type init,
+ struct ehci_hccr **hccr, struct ehci_hcor **hcor)
+{
+ struct usb_ehci *ehci;
+#ifdef CONFIG_MX31
+ struct clock_control_regs *sc_regs =
+ (struct clock_control_regs *)CCM_BASE;
+
+ __raw_readl(&sc_regs->ccmr);
+ __raw_writel(__raw_readl(&sc_regs->ccmr) | (1 << 9), &sc_regs->ccmr) ;
+#endif
+
+ udelay(80);
+
+ ehci = (struct usb_ehci *)(IMX_USB_BASE +
+ IMX_USB_PORT_OFFSET * CONFIG_MXC_USB_PORT);
+ *hccr = (struct ehci_hccr *)((uint32_t)&ehci->caplength);
+ *hcor = (struct ehci_hcor *)((uint32_t) *hccr +
+ HC_LENGTH(ehci_readl(&(*hccr)->cr_capbase)));
+ setbits_le32(&ehci->usbmode, CM_HOST);
+ __raw_writel(CONFIG_MXC_USB_PORTSC, &ehci->portsc);
+ mxc_set_usbcontrol(CONFIG_MXC_USB_PORT, CONFIG_MXC_USB_FLAGS);
+#ifdef CONFIG_MX35
+ /* Workaround for ENGcm11601 */
+ __raw_writel(0, &ehci->sbuscfg);
+#endif
+
+ udelay(10000);
+
+ return 0;
+}
+
+/*
+ * Destroy the appropriate control structures corresponding
+ * the the EHCI host controller.
+ */
+int ehci_hcd_stop(int index)
+{
+ return 0;
+}
Code Review / kvmfornfv.git / blobdiff