Add qemu 2.4.0

[kvmfornfv.git] / qemu / roms / u-boot / drivers / serial / serial_pl01x.h

diff --git a/qemu/roms/u-boot/drivers/serial/serial_pl01x.h b/qemu/roms/u-boot/drivers/serial/serial_pl01x.h
new file mode 100644 (file)
index 0000000..288a4f1
--- /dev/null
+++ b/qemu/roms/u-boot/drivers/serial/serial_pl01x.h
@@ -0,0 +1,128 @@
+/*
+ * (C) Copyright 2003, 2004
+ * ARM Ltd.
+ * Philippe Robin, <philippe.robin@arm.com>
+ *
+ * SPDX-License-Identifier:    GPL-2.0+
+ */
+
+/*
+ * ARM PrimeCell UART's (PL010 & PL011)
+ * ------------------------------------
+ *
+ *  Definitions common to both PL010 & PL011
+ *
+ */
+
+#ifndef __ASSEMBLY__
+/*
+ * We can use a combined structure for PL010 and PL011, because they overlap
+ * only in common registers.
+ */
+struct pl01x_regs {
+       u32     dr;             /* 0x00 Data register */
+       u32     ecr;            /* 0x04 Error clear register (Write) */
+       u32     pl010_lcrh;     /* 0x08 Line control register, high byte */
+       u32     pl010_lcrm;     /* 0x0C Line control register, middle byte */
+       u32     pl010_lcrl;     /* 0x10 Line control register, low byte */
+       u32     pl010_cr;       /* 0x14 Control register */
+       u32     fr;             /* 0x18 Flag register (Read only) */
+#ifdef CONFIG_PL011_SERIAL_RLCR
+       u32     pl011_rlcr;     /* 0x1c Receive line control register */
+#else
+       u32     reserved;
+#endif
+       u32     ilpr;           /* 0x20 IrDA low-power counter register */
+       u32     pl011_ibrd;     /* 0x24 Integer baud rate register */
+       u32     pl011_fbrd;     /* 0x28 Fractional baud rate register */
+       u32     pl011_lcrh;     /* 0x2C Line control register */
+       u32     pl011_cr;       /* 0x30 Control register */
+};
+#endif
+
+#define UART_PL01x_RSR_OE               0x08
+#define UART_PL01x_RSR_BE               0x04
+#define UART_PL01x_RSR_PE               0x02
+#define UART_PL01x_RSR_FE               0x01
+
+#define UART_PL01x_FR_TXFE              0x80
+#define UART_PL01x_FR_RXFF              0x40
+#define UART_PL01x_FR_TXFF              0x20
+#define UART_PL01x_FR_RXFE              0x10
+#define UART_PL01x_FR_BUSY              0x08
+#define UART_PL01x_FR_TMSK              (UART_PL01x_FR_TXFF + UART_PL01x_FR_BUSY)
+
+/*
+ *  PL010 definitions
+ *
+ */
+#define UART_PL010_CR_LPE               (1 << 7)
+#define UART_PL010_CR_RTIE              (1 << 6)
+#define UART_PL010_CR_TIE               (1 << 5)
+#define UART_PL010_CR_RIE               (1 << 4)
+#define UART_PL010_CR_MSIE              (1 << 3)
+#define UART_PL010_CR_IIRLP             (1 << 2)
+#define UART_PL010_CR_SIREN             (1 << 1)
+#define UART_PL010_CR_UARTEN            (1 << 0)
+
+#define UART_PL010_LCRH_WLEN_8          (3 << 5)
+#define UART_PL010_LCRH_WLEN_7          (2 << 5)
+#define UART_PL010_LCRH_WLEN_6          (1 << 5)
+#define UART_PL010_LCRH_WLEN_5          (0 << 5)
+#define UART_PL010_LCRH_FEN             (1 << 4)
+#define UART_PL010_LCRH_STP2            (1 << 3)
+#define UART_PL010_LCRH_EPS             (1 << 2)
+#define UART_PL010_LCRH_PEN             (1 << 1)
+#define UART_PL010_LCRH_BRK             (1 << 0)
+
+
+#define UART_PL010_BAUD_460800            1
+#define UART_PL010_BAUD_230400            3
+#define UART_PL010_BAUD_115200            7
+#define UART_PL010_BAUD_57600             15
+#define UART_PL010_BAUD_38400             23
+#define UART_PL010_BAUD_19200             47
+#define UART_PL010_BAUD_14400             63
+#define UART_PL010_BAUD_9600              95
+#define UART_PL010_BAUD_4800              191
+#define UART_PL010_BAUD_2400              383
+#define UART_PL010_BAUD_1200              767
+/*
+ *  PL011 definitions
+ *
+ */
+#define UART_PL011_LCRH_SPS             (1 << 7)
+#define UART_PL011_LCRH_WLEN_8          (3 << 5)
+#define UART_PL011_LCRH_WLEN_7          (2 << 5)
+#define UART_PL011_LCRH_WLEN_6          (1 << 5)
+#define UART_PL011_LCRH_WLEN_5          (0 << 5)
+#define UART_PL011_LCRH_FEN             (1 << 4)
+#define UART_PL011_LCRH_STP2            (1 << 3)
+#define UART_PL011_LCRH_EPS             (1 << 2)
+#define UART_PL011_LCRH_PEN             (1 << 1)
+#define UART_PL011_LCRH_BRK             (1 << 0)
+
+#define UART_PL011_CR_CTSEN             (1 << 15)
+#define UART_PL011_CR_RTSEN             (1 << 14)
+#define UART_PL011_CR_OUT2              (1 << 13)
+#define UART_PL011_CR_OUT1              (1 << 12)
+#define UART_PL011_CR_RTS               (1 << 11)
+#define UART_PL011_CR_DTR               (1 << 10)
+#define UART_PL011_CR_RXE               (1 << 9)
+#define UART_PL011_CR_TXE               (1 << 8)
+#define UART_PL011_CR_LPE               (1 << 7)
+#define UART_PL011_CR_IIRLP             (1 << 2)
+#define UART_PL011_CR_SIREN             (1 << 1)
+#define UART_PL011_CR_UARTEN            (1 << 0)
+
+#define UART_PL011_IMSC_OEIM            (1 << 10)
+#define UART_PL011_IMSC_BEIM            (1 << 9)
+#define UART_PL011_IMSC_PEIM            (1 << 8)
+#define UART_PL011_IMSC_FEIM            (1 << 7)
+#define UART_PL011_IMSC_RTIM            (1 << 6)
+#define UART_PL011_IMSC_TXIM            (1 << 5)
+#define UART_PL011_IMSC_RXIM            (1 << 4)
+#define UART_PL011_IMSC_DSRMIM          (1 << 3)
+#define UART_PL011_IMSC_DCDMIM          (1 << 2)
+#define UART_PL011_IMSC_CTSMIM          (1 << 1)
+#define UART_PL011_IMSC_RIMIM           (1 << 0)