Add qemu 2.4.0

[kvmfornfv.git] / qemu / roms / u-boot / drivers / rtc / mxsrtc.c

diff --git a/qemu/roms/u-boot/drivers/rtc/mxsrtc.c b/qemu/roms/u-boot/drivers/rtc/mxsrtc.c
new file mode 100644 (file)
index 0000000..32ba8a3
--- /dev/null
+++ b/qemu/roms/u-boot/drivers/rtc/mxsrtc.c
@@ -0,0 +1,73 @@
+/*
+ * Freescale i.MX28 RTC Driver
+ *
+ * Copyright (C) 2011 Marek Vasut <marek.vasut@gmail.com>
+ * on behalf of DENX Software Engineering GmbH
+ *
+ * SPDX-License-Identifier:    GPL-2.0+
+ */
+
+#include <common.h>
+#include <rtc.h>
+#include <asm/io.h>
+#include <asm/arch/imx-regs.h>
+#include <asm/arch/sys_proto.h>
+
+#define        MXS_RTC_MAX_TIMEOUT     1000000
+
+/* Set time in seconds since 1970-01-01 */
+int mxs_rtc_set_time(uint32_t secs)
+{
+       struct mxs_rtc_regs *rtc_regs = (struct mxs_rtc_regs *)MXS_RTC_BASE;
+       int ret;
+
+       writel(secs, &rtc_regs->hw_rtc_seconds);
+
+       /*
+        * The 0x80 here means seconds were copied to analog. This information
+        * is taken from the linux kernel driver for the STMP37xx RTC since
+        * documentation doesn't mention it.
+        */
+       ret = mxs_wait_mask_clr(&rtc_regs->hw_rtc_stat_reg,
+               0x80 << RTC_STAT_STALE_REGS_OFFSET, MXS_RTC_MAX_TIMEOUT);
+
+       if (ret)
+               printf("MXS RTC: Timeout waiting for update\n");
+
+       return ret;
+}
+
+int rtc_get(struct rtc_time *time)
+{
+       struct mxs_rtc_regs *rtc_regs = (struct mxs_rtc_regs *)MXS_RTC_BASE;
+       uint32_t secs;
+
+       secs = readl(&rtc_regs->hw_rtc_seconds);
+       to_tm(secs, time);
+
+       return 0;
+}
+
+int rtc_set(struct rtc_time *time)
+{
+       uint32_t secs;
+
+       secs = mktime(time->tm_year, time->tm_mon, time->tm_mday,
+               time->tm_hour, time->tm_min, time->tm_sec);
+
+       return mxs_rtc_set_time(secs);
+}
+
+void rtc_reset(void)
+{
+       struct mxs_rtc_regs *rtc_regs = (struct mxs_rtc_regs *)MXS_RTC_BASE;
+       int ret;
+
+       /* Set time to 1970-01-01 */
+       mxs_rtc_set_time(0);
+
+       /* Reset the RTC block */
+       ret = mxs_reset_block(&rtc_regs->hw_rtc_ctrl_reg);
+       if (ret)
+               printf("MXS RTC: Block reset timeout\n");
+}