--- /dev/null
+/*
+ * arch/powerpc/kernel/pci_auto.c
+ *
+ * PCI autoconfiguration library
+ *
+ * Author: Matt Porter <mporter@mvista.com>
+ *
+ * Copyright 2000 MontaVista Software Inc.
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#include <common.h>
+
+#include <pci.h>
+
+#undef DEBUG
+#ifdef DEBUG
+#define DEBUGF(x...) printf(x)
+#else
+#define DEBUGF(x...)
+#endif /* DEBUG */
+
+#define PCIAUTO_IDE_MODE_MASK 0x05
+
+/* the user can define CONFIG_SYS_PCI_CACHE_LINE_SIZE to avoid problems */
+#ifndef CONFIG_SYS_PCI_CACHE_LINE_SIZE
+#define CONFIG_SYS_PCI_CACHE_LINE_SIZE 8
+#endif
+
+/*
+ *
+ */
+
+void pciauto_region_init(struct pci_region *res)
+{
+ /*
+ * Avoid allocating PCI resources from address 0 -- this is illegal
+ * according to PCI 2.1 and moreover, this is known to cause Linux IDE
+ * drivers to fail. Use a reasonable starting value of 0x1000 instead.
+ */
+ res->bus_lower = res->bus_start ? res->bus_start : 0x1000;
+}
+
+void pciauto_region_align(struct pci_region *res, pci_size_t size)
+{
+ res->bus_lower = ((res->bus_lower - 1) | (size - 1)) + 1;
+}
+
+int pciauto_region_allocate(struct pci_region *res, pci_size_t size,
+ pci_addr_t *bar)
+{
+ pci_addr_t addr;
+
+ if (!res) {
+ DEBUGF("No resource");
+ goto error;
+ }
+
+ addr = ((res->bus_lower - 1) | (size - 1)) + 1;
+
+ if (addr - res->bus_start + size > res->size) {
+ DEBUGF("No room in resource");
+ goto error;
+ }
+
+ res->bus_lower = addr + size;
+
+ DEBUGF("address=0x%llx bus_lower=0x%llx", (u64)addr, (u64)res->bus_lower);
+
+ *bar = addr;
+ return 0;
+
+ error:
+ *bar = (pci_addr_t)-1;
+ return -1;
+}
+
+/*
+ *
+ */
+
+void pciauto_setup_device(struct pci_controller *hose,
+ pci_dev_t dev, int bars_num,
+ struct pci_region *mem,
+ struct pci_region *prefetch,
+ struct pci_region *io)
+{
+ u32 bar_response;
+ pci_size_t bar_size;
+ u16 cmdstat = 0;
+ int bar, bar_nr = 0;
+#ifndef CONFIG_PCI_ENUM_ONLY
+ pci_addr_t bar_value;
+ struct pci_region *bar_res;
+ int found_mem64 = 0;
+#endif
+
+ pci_hose_read_config_word(hose, dev, PCI_COMMAND, &cmdstat);
+ cmdstat = (cmdstat & ~(PCI_COMMAND_IO | PCI_COMMAND_MEMORY)) | PCI_COMMAND_MASTER;
+
+ for (bar = PCI_BASE_ADDRESS_0;
+ bar < PCI_BASE_ADDRESS_0 + (bars_num * 4); bar += 4) {
+ /* Tickle the BAR and get the response */
+#ifndef CONFIG_PCI_ENUM_ONLY
+ pci_hose_write_config_dword(hose, dev, bar, 0xffffffff);
+#endif
+ pci_hose_read_config_dword(hose, dev, bar, &bar_response);
+
+ /* If BAR is not implemented go to the next BAR */
+ if (!bar_response)
+ continue;
+
+#ifndef CONFIG_PCI_ENUM_ONLY
+ found_mem64 = 0;
+#endif
+
+ /* Check the BAR type and set our address mask */
+ if (bar_response & PCI_BASE_ADDRESS_SPACE) {
+ bar_size = ((~(bar_response & PCI_BASE_ADDRESS_IO_MASK))
+ & 0xffff) + 1;
+#ifndef CONFIG_PCI_ENUM_ONLY
+ bar_res = io;
+#endif
+
+ DEBUGF("PCI Autoconfig: BAR %d, I/O, size=0x%llx, ", bar_nr, (u64)bar_size);
+ } else {
+ if ((bar_response & PCI_BASE_ADDRESS_MEM_TYPE_MASK) ==
+ PCI_BASE_ADDRESS_MEM_TYPE_64) {
+ u32 bar_response_upper;
+ u64 bar64;
+
+#ifndef CONFIG_PCI_ENUM_ONLY
+ pci_hose_write_config_dword(hose, dev, bar + 4,
+ 0xffffffff);
+#endif
+ pci_hose_read_config_dword(hose, dev, bar + 4,
+ &bar_response_upper);
+
+ bar64 = ((u64)bar_response_upper << 32) | bar_response;
+
+ bar_size = ~(bar64 & PCI_BASE_ADDRESS_MEM_MASK) + 1;
+#ifndef CONFIG_PCI_ENUM_ONLY
+ found_mem64 = 1;
+#endif
+ } else {
+ bar_size = (u32)(~(bar_response & PCI_BASE_ADDRESS_MEM_MASK) + 1);
+ }
+#ifndef CONFIG_PCI_ENUM_ONLY
+ if (prefetch && (bar_response & PCI_BASE_ADDRESS_MEM_PREFETCH))
+ bar_res = prefetch;
+ else
+ bar_res = mem;
+#endif
+
+ DEBUGF("PCI Autoconfig: BAR %d, Mem, size=0x%llx, ", bar_nr, (u64)bar_size);
+ }
+
+#ifndef CONFIG_PCI_ENUM_ONLY
+ if (pciauto_region_allocate(bar_res, bar_size, &bar_value) == 0) {
+ /* Write it out and update our limit */
+ pci_hose_write_config_dword(hose, dev, bar, (u32)bar_value);
+
+ if (found_mem64) {
+ bar += 4;
+#ifdef CONFIG_SYS_PCI_64BIT
+ pci_hose_write_config_dword(hose, dev, bar, (u32)(bar_value>>32));
+#else
+ /*
+ * If we are a 64-bit decoder then increment to the
+ * upper 32 bits of the bar and force it to locate
+ * in the lower 4GB of memory.
+ */
+ pci_hose_write_config_dword(hose, dev, bar, 0x00000000);
+#endif
+ }
+
+ }
+#endif
+ cmdstat |= (bar_response & PCI_BASE_ADDRESS_SPACE) ?
+ PCI_COMMAND_IO : PCI_COMMAND_MEMORY;
+
+ DEBUGF("\n");
+
+ bar_nr++;
+ }
+
+ pci_hose_write_config_word(hose, dev, PCI_COMMAND, cmdstat);
+ pci_hose_write_config_byte(hose, dev, PCI_CACHE_LINE_SIZE,
+ CONFIG_SYS_PCI_CACHE_LINE_SIZE);
+ pci_hose_write_config_byte(hose, dev, PCI_LATENCY_TIMER, 0x80);
+}
+
+void pciauto_prescan_setup_bridge(struct pci_controller *hose,
+ pci_dev_t dev, int sub_bus)
+{
+ struct pci_region *pci_mem = hose->pci_mem;
+ struct pci_region *pci_prefetch = hose->pci_prefetch;
+ struct pci_region *pci_io = hose->pci_io;
+ u16 cmdstat;
+
+ pci_hose_read_config_word(hose, dev, PCI_COMMAND, &cmdstat);
+
+ /* Configure bus number registers */
+ pci_hose_write_config_byte(hose, dev, PCI_PRIMARY_BUS,
+ PCI_BUS(dev) - hose->first_busno);
+ pci_hose_write_config_byte(hose, dev, PCI_SECONDARY_BUS,
+ sub_bus - hose->first_busno);
+ pci_hose_write_config_byte(hose, dev, PCI_SUBORDINATE_BUS, 0xff);
+
+ if (pci_mem) {
+ /* Round memory allocator to 1MB boundary */
+ pciauto_region_align(pci_mem, 0x100000);
+
+ /* Set up memory and I/O filter limits, assume 32-bit I/O space */
+ pci_hose_write_config_word(hose, dev, PCI_MEMORY_BASE,
+ (pci_mem->bus_lower & 0xfff00000) >> 16);
+
+ cmdstat |= PCI_COMMAND_MEMORY;
+ }
+
+ if (pci_prefetch) {
+ /* Round memory allocator to 1MB boundary */
+ pciauto_region_align(pci_prefetch, 0x100000);
+
+ /* Set up memory and I/O filter limits, assume 32-bit I/O space */
+ pci_hose_write_config_word(hose, dev, PCI_PREF_MEMORY_BASE,
+ (pci_prefetch->bus_lower & 0xfff00000) >> 16);
+
+ cmdstat |= PCI_COMMAND_MEMORY;
+ } else {
+ /* We don't support prefetchable memory for now, so disable */
+ pci_hose_write_config_word(hose, dev, PCI_PREF_MEMORY_BASE, 0x1000);
+ pci_hose_write_config_word(hose, dev, PCI_PREF_MEMORY_LIMIT, 0x0);
+ }
+
+ if (pci_io) {
+ /* Round I/O allocator to 4KB boundary */
+ pciauto_region_align(pci_io, 0x1000);
+
+ pci_hose_write_config_byte(hose, dev, PCI_IO_BASE,
+ (pci_io->bus_lower & 0x0000f000) >> 8);
+ pci_hose_write_config_word(hose, dev, PCI_IO_BASE_UPPER16,
+ (pci_io->bus_lower & 0xffff0000) >> 16);
+
+ cmdstat |= PCI_COMMAND_IO;
+ }
+
+ /* Enable memory and I/O accesses, enable bus master */
+ pci_hose_write_config_word(hose, dev, PCI_COMMAND,
+ cmdstat | PCI_COMMAND_MASTER);
+}
+
+void pciauto_postscan_setup_bridge(struct pci_controller *hose,
+ pci_dev_t dev, int sub_bus)
+{
+ struct pci_region *pci_mem = hose->pci_mem;
+ struct pci_region *pci_prefetch = hose->pci_prefetch;
+ struct pci_region *pci_io = hose->pci_io;
+
+ /* Configure bus number registers */
+ pci_hose_write_config_byte(hose, dev, PCI_SUBORDINATE_BUS,
+ sub_bus - hose->first_busno);
+
+ if (pci_mem) {
+ /* Round memory allocator to 1MB boundary */
+ pciauto_region_align(pci_mem, 0x100000);
+
+ pci_hose_write_config_word(hose, dev, PCI_MEMORY_LIMIT,
+ (pci_mem->bus_lower - 1) >> 16);
+ }
+
+ if (pci_prefetch) {
+ /* Round memory allocator to 1MB boundary */
+ pciauto_region_align(pci_prefetch, 0x100000);
+
+ pci_hose_write_config_word(hose, dev, PCI_PREF_MEMORY_LIMIT,
+ (pci_prefetch->bus_lower - 1) >> 16);
+ }
+
+ if (pci_io) {
+ /* Round I/O allocator to 4KB boundary */
+ pciauto_region_align(pci_io, 0x1000);
+
+ pci_hose_write_config_byte(hose, dev, PCI_IO_LIMIT,
+ ((pci_io->bus_lower - 1) & 0x0000f000) >> 8);
+ pci_hose_write_config_word(hose, dev, PCI_IO_LIMIT_UPPER16,
+ ((pci_io->bus_lower - 1) & 0xffff0000) >> 16);
+ }
+}
+
+/*
+ *
+ */
+
+void pciauto_config_init(struct pci_controller *hose)
+{
+ int i;
+
+ hose->pci_io = hose->pci_mem = hose->pci_prefetch = NULL;
+
+ for (i = 0; i < hose->region_count; i++) {
+ switch(hose->regions[i].flags) {
+ case PCI_REGION_IO:
+ if (!hose->pci_io ||
+ hose->pci_io->size < hose->regions[i].size)
+ hose->pci_io = hose->regions + i;
+ break;
+ case PCI_REGION_MEM:
+ if (!hose->pci_mem ||
+ hose->pci_mem->size < hose->regions[i].size)
+ hose->pci_mem = hose->regions + i;
+ break;
+ case (PCI_REGION_MEM | PCI_REGION_PREFETCH):
+ if (!hose->pci_prefetch ||
+ hose->pci_prefetch->size < hose->regions[i].size)
+ hose->pci_prefetch = hose->regions + i;
+ break;
+ }
+ }
+
+
+ if (hose->pci_mem) {
+ pciauto_region_init(hose->pci_mem);
+
+ DEBUGF("PCI Autoconfig: Bus Memory region: [0x%llx-0x%llx],\n"
+ "\t\tPhysical Memory [%llx-%llxx]\n",
+ (u64)hose->pci_mem->bus_start,
+ (u64)(hose->pci_mem->bus_start + hose->pci_mem->size - 1),
+ (u64)hose->pci_mem->phys_start,
+ (u64)(hose->pci_mem->phys_start + hose->pci_mem->size - 1));
+ }
+
+ if (hose->pci_prefetch) {
+ pciauto_region_init(hose->pci_prefetch);
+
+ DEBUGF("PCI Autoconfig: Bus Prefetchable Mem: [0x%llx-0x%llx],\n"
+ "\t\tPhysical Memory [%llx-%llx]\n",
+ (u64)hose->pci_prefetch->bus_start,
+ (u64)(hose->pci_prefetch->bus_start +
+ hose->pci_prefetch->size - 1),
+ (u64)hose->pci_prefetch->phys_start,
+ (u64)(hose->pci_prefetch->phys_start +
+ hose->pci_prefetch->size - 1));
+ }
+
+ if (hose->pci_io) {
+ pciauto_region_init(hose->pci_io);
+
+ DEBUGF("PCI Autoconfig: Bus I/O region: [0x%llx-0x%llx],\n"
+ "\t\tPhysical Memory: [%llx-%llx]\n",
+ (u64)hose->pci_io->bus_start,
+ (u64)(hose->pci_io->bus_start + hose->pci_io->size - 1),
+ (u64)hose->pci_io->phys_start,
+ (u64)(hose->pci_io->phys_start + hose->pci_io->size - 1));
+
+ }
+}
+
+/*
+ * HJF: Changed this to return int. I think this is required
+ * to get the correct result when scanning bridges
+ */
+int pciauto_config_device(struct pci_controller *hose, pci_dev_t dev)
+{
+ unsigned int sub_bus = PCI_BUS(dev);
+ unsigned short class;
+ unsigned char prg_iface;
+ int n;
+
+ pci_hose_read_config_word(hose, dev, PCI_CLASS_DEVICE, &class);
+
+ switch (class) {
+ case PCI_CLASS_BRIDGE_PCI:
+ hose->current_busno++;
+ pciauto_setup_device(hose, dev, 2, hose->pci_mem,
+ hose->pci_prefetch, hose->pci_io);
+
+ DEBUGF("PCI Autoconfig: Found P2P bridge, device %d\n", PCI_DEV(dev));
+
+ /* Passing in current_busno allows for sibling P2P bridges */
+ pciauto_prescan_setup_bridge(hose, dev, hose->current_busno);
+ /*
+ * need to figure out if this is a subordinate bridge on the bus
+ * to be able to properly set the pri/sec/sub bridge registers.
+ */
+ n = pci_hose_scan_bus(hose, hose->current_busno);
+
+ /* figure out the deepest we've gone for this leg */
+ sub_bus = max(n, sub_bus);
+ pciauto_postscan_setup_bridge(hose, dev, sub_bus);
+
+ sub_bus = hose->current_busno;
+ break;
+
+ case PCI_CLASS_STORAGE_IDE:
+ pci_hose_read_config_byte(hose, dev, PCI_CLASS_PROG, &prg_iface);
+ if (!(prg_iface & PCIAUTO_IDE_MODE_MASK)) {
+ DEBUGF("PCI Autoconfig: Skipping legacy mode IDE controller\n");
+ return sub_bus;
+ }
+
+ pciauto_setup_device(hose, dev, 6, hose->pci_mem,
+ hose->pci_prefetch, hose->pci_io);
+ break;
+
+ case PCI_CLASS_BRIDGE_CARDBUS:
+ /*
+ * just do a minimal setup of the bridge,
+ * let the OS take care of the rest
+ */
+ pciauto_setup_device(hose, dev, 0, hose->pci_mem,
+ hose->pci_prefetch, hose->pci_io);
+
+ DEBUGF("PCI Autoconfig: Found P2CardBus bridge, device %d\n",
+ PCI_DEV(dev));
+
+ hose->current_busno++;
+ break;
+
+#if defined(CONFIG_PCIAUTO_SKIP_HOST_BRIDGE)
+ case PCI_CLASS_BRIDGE_OTHER:
+ DEBUGF("PCI Autoconfig: Skipping bridge device %d\n",
+ PCI_DEV(dev));
+ break;
+#endif
+#if defined(CONFIG_MPC834x) && !defined(CONFIG_VME8349)
+ case PCI_CLASS_BRIDGE_OTHER:
+ /*
+ * The host/PCI bridge 1 seems broken in 8349 - it presents
+ * itself as 'PCI_CLASS_BRIDGE_OTHER' and appears as an _agent_
+ * device claiming resources io/mem/irq.. we only allow for
+ * the PIMMR window to be allocated (BAR0 - 1MB size)
+ */
+ DEBUGF("PCI Autoconfig: Broken bridge found, only minimal config\n");
+ pciauto_setup_device(hose, dev, 0, hose->pci_mem,
+ hose->pci_prefetch, hose->pci_io);
+ break;
+#endif
+
+ case PCI_CLASS_PROCESSOR_POWERPC: /* an agent or end-point */
+ DEBUGF("PCI AutoConfig: Found PowerPC device\n");
+
+ default:
+ pciauto_setup_device(hose, dev, 6, hose->pci_mem,
+ hose->pci_prefetch, hose->pci_io);
+ break;
+ }
+
+ return sub_bus;
+}
Code Review / kvmfornfv.git / blobdiff