--- /dev/null
+/*
+ * Copyright 2007-2012 Freescale Semiconductor, Inc.
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#include <common.h>
+#include <malloc.h>
+#include <asm/fsl_serdes.h>
+
+DECLARE_GLOBAL_DATA_PTR;
+
+/*
+ * PCI/PCIE Controller initialization for mpc85xx/mpc86xx soc's
+ *
+ * Initialize controller and call the common driver/pci pci_hose_scan to
+ * scan for bridges and devices.
+ *
+ * Hose fields which need to be pre-initialized by board specific code:
+ * regions[]
+ * first_busno
+ *
+ * Fields updated:
+ * last_busno
+ */
+
+#include <pci.h>
+#include <asm/io.h>
+#include <asm/fsl_pci.h>
+
+#ifndef CONFIG_SYS_PCI_MEMORY_BUS
+#define CONFIG_SYS_PCI_MEMORY_BUS 0
+#endif
+
+#ifndef CONFIG_SYS_PCI_MEMORY_PHYS
+#define CONFIG_SYS_PCI_MEMORY_PHYS 0
+#endif
+
+#if defined(CONFIG_SYS_PCI_64BIT) && !defined(CONFIG_SYS_PCI64_MEMORY_BUS)
+#define CONFIG_SYS_PCI64_MEMORY_BUS (64ull*1024*1024*1024)
+#endif
+
+/* Setup one inbound ATMU window.
+ *
+ * We let the caller decide what the window size should be
+ */
+static void set_inbound_window(volatile pit_t *pi,
+ struct pci_region *r,
+ u64 size)
+{
+ u32 sz = (__ilog2_u64(size) - 1);
+ u32 flag = PIWAR_EN | PIWAR_LOCAL |
+ PIWAR_READ_SNOOP | PIWAR_WRITE_SNOOP;
+
+ out_be32(&pi->pitar, r->phys_start >> 12);
+ out_be32(&pi->piwbar, r->bus_start >> 12);
+#ifdef CONFIG_SYS_PCI_64BIT
+ out_be32(&pi->piwbear, r->bus_start >> 44);
+#else
+ out_be32(&pi->piwbear, 0);
+#endif
+ if (r->flags & PCI_REGION_PREFETCH)
+ flag |= PIWAR_PF;
+ out_be32(&pi->piwar, flag | sz);
+}
+
+int fsl_setup_hose(struct pci_controller *hose, unsigned long addr)
+{
+ volatile ccsr_fsl_pci_t *pci = (ccsr_fsl_pci_t *) addr;
+
+ /* Reset hose to make sure its in a clean state */
+ memset(hose, 0, sizeof(struct pci_controller));
+
+ pci_setup_indirect(hose, (u32)&pci->cfg_addr, (u32)&pci->cfg_data);
+
+ return fsl_is_pci_agent(hose);
+}
+
+static int fsl_pci_setup_inbound_windows(struct pci_controller *hose,
+ u64 out_lo, u8 pcie_cap,
+ volatile pit_t *pi)
+{
+ struct pci_region *r = hose->regions + hose->region_count;
+ u64 sz = min((u64)gd->ram_size, (1ull << 32));
+
+ phys_addr_t phys_start = CONFIG_SYS_PCI_MEMORY_PHYS;
+ pci_addr_t bus_start = CONFIG_SYS_PCI_MEMORY_BUS;
+ pci_size_t pci_sz;
+
+ /* we have no space available for inbound memory mapping */
+ if (bus_start > out_lo) {
+ printf ("no space for inbound mapping of memory\n");
+ return 0;
+ }
+
+ /* limit size */
+ if ((bus_start + sz) > out_lo) {
+ sz = out_lo - bus_start;
+ debug ("limiting size to %llx\n", sz);
+ }
+
+ pci_sz = 1ull << __ilog2_u64(sz);
+ /*
+ * we can overlap inbound/outbound windows on PCI-E since RX & TX
+ * links a separate
+ */
+ if ((pcie_cap == PCI_CAP_ID_EXP) && (pci_sz < sz)) {
+ debug ("R0 bus_start: %llx phys_start: %llx size: %llx\n",
+ (u64)bus_start, (u64)phys_start, (u64)sz);
+ pci_set_region(r, bus_start, phys_start, sz,
+ PCI_REGION_MEM | PCI_REGION_SYS_MEMORY |
+ PCI_REGION_PREFETCH);
+
+ /* if we aren't an exact power of two match, pci_sz is smaller
+ * round it up to the next power of two. We report the actual
+ * size to pci region tracking.
+ */
+ if (pci_sz != sz)
+ sz = 2ull << __ilog2_u64(sz);
+
+ set_inbound_window(pi--, r++, sz);
+ sz = 0; /* make sure we dont set the R2 window */
+ } else {
+ debug ("R0 bus_start: %llx phys_start: %llx size: %llx\n",
+ (u64)bus_start, (u64)phys_start, (u64)pci_sz);
+ pci_set_region(r, bus_start, phys_start, pci_sz,
+ PCI_REGION_MEM | PCI_REGION_SYS_MEMORY |
+ PCI_REGION_PREFETCH);
+ set_inbound_window(pi--, r++, pci_sz);
+
+ sz -= pci_sz;
+ bus_start += pci_sz;
+ phys_start += pci_sz;
+
+ pci_sz = 1ull << __ilog2_u64(sz);
+ if (sz) {
+ debug ("R1 bus_start: %llx phys_start: %llx size: %llx\n",
+ (u64)bus_start, (u64)phys_start, (u64)pci_sz);
+ pci_set_region(r, bus_start, phys_start, pci_sz,
+ PCI_REGION_MEM | PCI_REGION_SYS_MEMORY |
+ PCI_REGION_PREFETCH);
+ set_inbound_window(pi--, r++, pci_sz);
+ sz -= pci_sz;
+ bus_start += pci_sz;
+ phys_start += pci_sz;
+ }
+ }
+
+#if defined(CONFIG_PHYS_64BIT) && defined(CONFIG_SYS_PCI_64BIT)
+ /*
+ * On 64-bit capable systems, set up a mapping for all of DRAM
+ * in high pci address space.
+ */
+ pci_sz = 1ull << __ilog2_u64(gd->ram_size);
+ /* round up to the next largest power of two */
+ if (gd->ram_size > pci_sz)
+ pci_sz = 1ull << (__ilog2_u64(gd->ram_size) + 1);
+ debug ("R64 bus_start: %llx phys_start: %llx size: %llx\n",
+ (u64)CONFIG_SYS_PCI64_MEMORY_BUS,
+ (u64)CONFIG_SYS_PCI_MEMORY_PHYS,
+ (u64)pci_sz);
+ pci_set_region(r,
+ CONFIG_SYS_PCI64_MEMORY_BUS,
+ CONFIG_SYS_PCI_MEMORY_PHYS,
+ pci_sz,
+ PCI_REGION_MEM | PCI_REGION_SYS_MEMORY |
+ PCI_REGION_PREFETCH);
+ set_inbound_window(pi--, r++, pci_sz);
+#else
+ pci_sz = 1ull << __ilog2_u64(sz);
+ if (sz) {
+ debug ("R2 bus_start: %llx phys_start: %llx size: %llx\n",
+ (u64)bus_start, (u64)phys_start, (u64)pci_sz);
+ pci_set_region(r, bus_start, phys_start, pci_sz,
+ PCI_REGION_MEM | PCI_REGION_SYS_MEMORY |
+ PCI_REGION_PREFETCH);
+ sz -= pci_sz;
+ bus_start += pci_sz;
+ phys_start += pci_sz;
+ set_inbound_window(pi--, r++, pci_sz);
+ }
+#endif
+
+#ifdef CONFIG_PHYS_64BIT
+ if (sz && (((u64)gd->ram_size) < (1ull << 32)))
+ printf("Was not able to map all of memory via "
+ "inbound windows -- %lld remaining\n", sz);
+#endif
+
+ hose->region_count = r - hose->regions;
+
+ return 1;
+}
+
+#ifdef CONFIG_SRIO_PCIE_BOOT_MASTER
+static void fsl_pcie_boot_master(pit_t *pi)
+{
+ /* configure inbound window for slave's u-boot image */
+ debug("PCIEBOOT - MASTER: Inbound window for slave's image; "
+ "Local = 0x%llx, Bus = 0x%llx, Size = 0x%x\n",
+ (u64)CONFIG_SRIO_PCIE_BOOT_IMAGE_MEM_PHYS,
+ (u64)CONFIG_SRIO_PCIE_BOOT_IMAGE_MEM_BUS1,
+ CONFIG_SRIO_PCIE_BOOT_IMAGE_SIZE);
+ struct pci_region r_inbound;
+ u32 sz_inbound = __ilog2_u64(CONFIG_SRIO_PCIE_BOOT_IMAGE_SIZE)
+ - 1;
+ pci_set_region(&r_inbound,
+ CONFIG_SRIO_PCIE_BOOT_IMAGE_MEM_BUS1,
+ CONFIG_SRIO_PCIE_BOOT_IMAGE_MEM_PHYS,
+ sz_inbound,
+ PCI_REGION_MEM | PCI_REGION_SYS_MEMORY);
+
+ set_inbound_window(pi--, &r_inbound,
+ CONFIG_SRIO_PCIE_BOOT_IMAGE_SIZE);
+
+ /* configure inbound window for slave's u-boot image */
+ debug("PCIEBOOT - MASTER: Inbound window for slave's image; "
+ "Local = 0x%llx, Bus = 0x%llx, Size = 0x%x\n",
+ (u64)CONFIG_SRIO_PCIE_BOOT_IMAGE_MEM_PHYS,
+ (u64)CONFIG_SRIO_PCIE_BOOT_IMAGE_MEM_BUS2,
+ CONFIG_SRIO_PCIE_BOOT_IMAGE_SIZE);
+ pci_set_region(&r_inbound,
+ CONFIG_SRIO_PCIE_BOOT_IMAGE_MEM_BUS2,
+ CONFIG_SRIO_PCIE_BOOT_IMAGE_MEM_PHYS,
+ sz_inbound,
+ PCI_REGION_MEM | PCI_REGION_SYS_MEMORY);
+
+ set_inbound_window(pi--, &r_inbound,
+ CONFIG_SRIO_PCIE_BOOT_IMAGE_SIZE);
+
+ /* configure inbound window for slave's ucode and ENV */
+ debug("PCIEBOOT - MASTER: Inbound window for slave's "
+ "ucode and ENV; "
+ "Local = 0x%llx, Bus = 0x%llx, Size = 0x%x\n",
+ (u64)CONFIG_SRIO_PCIE_BOOT_UCODE_ENV_MEM_PHYS,
+ (u64)CONFIG_SRIO_PCIE_BOOT_UCODE_ENV_MEM_BUS,
+ CONFIG_SRIO_PCIE_BOOT_UCODE_ENV_SIZE);
+ sz_inbound = __ilog2_u64(CONFIG_SRIO_PCIE_BOOT_UCODE_ENV_SIZE)
+ - 1;
+ pci_set_region(&r_inbound,
+ CONFIG_SRIO_PCIE_BOOT_UCODE_ENV_MEM_BUS,
+ CONFIG_SRIO_PCIE_BOOT_UCODE_ENV_MEM_PHYS,
+ sz_inbound,
+ PCI_REGION_MEM | PCI_REGION_SYS_MEMORY);
+
+ set_inbound_window(pi--, &r_inbound,
+ CONFIG_SRIO_PCIE_BOOT_UCODE_ENV_SIZE);
+}
+
+static void fsl_pcie_boot_master_release_slave(int port)
+{
+ unsigned long release_addr;
+
+ /* now release slave's core 0 */
+ switch (port) {
+ case 1:
+ release_addr = CONFIG_SYS_PCIE1_MEM_VIRT
+ + CONFIG_SRIO_PCIE_BOOT_BRR_OFFSET;
+ break;
+#ifdef CONFIG_SYS_PCIE2_MEM_VIRT
+ case 2:
+ release_addr = CONFIG_SYS_PCIE2_MEM_VIRT
+ + CONFIG_SRIO_PCIE_BOOT_BRR_OFFSET;
+ break;
+#endif
+#ifdef CONFIG_SYS_PCIE3_MEM_VIRT
+ case 3:
+ release_addr = CONFIG_SYS_PCIE3_MEM_VIRT
+ + CONFIG_SRIO_PCIE_BOOT_BRR_OFFSET;
+ break;
+#endif
+ default:
+ release_addr = 0;
+ break;
+ }
+ if (release_addr != 0) {
+ out_be32((void *)release_addr,
+ CONFIG_SRIO_PCIE_BOOT_RELEASE_MASK);
+ debug("PCIEBOOT - MASTER: "
+ "Release slave successfully! Now the slave should start up!\n");
+ } else {
+ debug("PCIEBOOT - MASTER: "
+ "Release slave failed!\n");
+ }
+}
+#endif
+
+void fsl_pci_init(struct pci_controller *hose, struct fsl_pci_info *pci_info)
+{
+ u32 cfg_addr = (u32)&((ccsr_fsl_pci_t *)pci_info->regs)->cfg_addr;
+ u32 cfg_data = (u32)&((ccsr_fsl_pci_t *)pci_info->regs)->cfg_data;
+ u16 temp16;
+ u32 temp32;
+ u32 block_rev;
+ int enabled, r, inbound = 0;
+ u16 ltssm;
+ u8 temp8, pcie_cap;
+ int pcie_cap_pos;
+ int pci_dcr;
+ int pci_dsr;
+ int pci_lsr;
+
+#if defined(CONFIG_FSL_PCIE_DISABLE_ASPM)
+ int pci_lcr;
+#endif
+
+ volatile ccsr_fsl_pci_t *pci = (ccsr_fsl_pci_t *)cfg_addr;
+ struct pci_region *reg = hose->regions + hose->region_count;
+ pci_dev_t dev = PCI_BDF(hose->first_busno, 0, 0);
+
+ /* Initialize ATMU registers based on hose regions and flags */
+ volatile pot_t *po = &pci->pot[1]; /* skip 0 */
+ volatile pit_t *pi;
+
+ u64 out_hi = 0, out_lo = -1ULL;
+ u32 pcicsrbar, pcicsrbar_sz;
+
+ pci_setup_indirect(hose, cfg_addr, cfg_data);
+
+ block_rev = in_be32(&pci->block_rev1);
+ if (PEX_IP_BLK_REV_2_2 <= block_rev) {
+ pi = &pci->pit[2]; /* 0xDC0 */
+ } else {
+ pi = &pci->pit[3]; /* 0xDE0 */
+ }
+
+ /* Handle setup of outbound windows first */
+ for (r = 0; r < hose->region_count; r++) {
+ unsigned long flags = hose->regions[r].flags;
+ u32 sz = (__ilog2_u64((u64)hose->regions[r].size) - 1);
+
+ flags &= PCI_REGION_SYS_MEMORY|PCI_REGION_TYPE;
+ if (flags != PCI_REGION_SYS_MEMORY) {
+ u64 start = hose->regions[r].bus_start;
+ u64 end = start + hose->regions[r].size;
+
+ out_be32(&po->powbar, hose->regions[r].phys_start >> 12);
+ out_be32(&po->potar, start >> 12);
+#ifdef CONFIG_SYS_PCI_64BIT
+ out_be32(&po->potear, start >> 44);
+#else
+ out_be32(&po->potear, 0);
+#endif
+ if (hose->regions[r].flags & PCI_REGION_IO) {
+ out_be32(&po->powar, POWAR_EN | sz |
+ POWAR_IO_READ | POWAR_IO_WRITE);
+ } else {
+ out_be32(&po->powar, POWAR_EN | sz |
+ POWAR_MEM_READ | POWAR_MEM_WRITE);
+ out_lo = min(start, out_lo);
+ out_hi = max(end, out_hi);
+ }
+ po++;
+ }
+ }
+ debug("Outbound memory range: %llx:%llx\n", out_lo, out_hi);
+
+ /* setup PCSRBAR/PEXCSRBAR */
+ pci_hose_write_config_dword(hose, dev, PCI_BASE_ADDRESS_0, 0xffffffff);
+ pci_hose_read_config_dword (hose, dev, PCI_BASE_ADDRESS_0, &pcicsrbar_sz);
+ pcicsrbar_sz = ~pcicsrbar_sz + 1;
+
+ if (out_hi < (0x100000000ull - pcicsrbar_sz) ||
+ (out_lo > 0x100000000ull))
+ pcicsrbar = 0x100000000ull - pcicsrbar_sz;
+ else
+ pcicsrbar = (out_lo - pcicsrbar_sz) & -pcicsrbar_sz;
+ pci_hose_write_config_dword(hose, dev, PCI_BASE_ADDRESS_0, pcicsrbar);
+
+ out_lo = min(out_lo, (u64)pcicsrbar);
+
+ debug("PCICSRBAR @ 0x%x\n", pcicsrbar);
+
+ pci_set_region(reg++, pcicsrbar, CONFIG_SYS_CCSRBAR_PHYS,
+ pcicsrbar_sz, PCI_REGION_SYS_MEMORY);
+ hose->region_count++;
+
+ /* see if we are a PCIe or PCI controller */
+ pcie_cap_pos = pci_hose_find_capability(hose, dev, PCI_CAP_ID_EXP);
+ pci_dcr = pcie_cap_pos + 0x08;
+ pci_dsr = pcie_cap_pos + 0x0a;
+ pci_lsr = pcie_cap_pos + 0x12;
+
+ pci_hose_read_config_byte(hose, dev, pcie_cap_pos, &pcie_cap);
+
+#ifdef CONFIG_SRIO_PCIE_BOOT_MASTER
+ /* boot from PCIE --master */
+ char *s = getenv("bootmaster");
+ char pcie[6];
+ sprintf(pcie, "PCIE%d", pci_info->pci_num);
+
+ if (s && (strcmp(s, pcie) == 0)) {
+ debug("PCIEBOOT - MASTER: Master port [ %d ] for pcie boot.\n",
+ pci_info->pci_num);
+ fsl_pcie_boot_master((pit_t *)pi);
+ } else {
+ /* inbound */
+ inbound = fsl_pci_setup_inbound_windows(hose,
+ out_lo, pcie_cap, pi);
+ }
+#else
+ /* inbound */
+ inbound = fsl_pci_setup_inbound_windows(hose, out_lo, pcie_cap, pi);
+#endif
+
+ for (r = 0; r < hose->region_count; r++)
+ debug("PCI reg:%d %016llx:%016llx %016llx %08lx\n", r,
+ (u64)hose->regions[r].phys_start,
+ (u64)hose->regions[r].bus_start,
+ (u64)hose->regions[r].size,
+ hose->regions[r].flags);
+
+ pci_register_hose(hose);
+ pciauto_config_init(hose); /* grab pci_{mem,prefetch,io} */
+ hose->current_busno = hose->first_busno;
+
+ out_be32(&pci->pedr, 0xffffffff); /* Clear any errors */
+ out_be32(&pci->peer, ~0x20140); /* Enable All Error Interrupts except
+ * - Master abort (pci)
+ * - Master PERR (pci)
+ * - ICCA (PCIe)
+ */
+ pci_hose_read_config_dword(hose, dev, pci_dcr, &temp32);
+ temp32 |= 0xf000e; /* set URR, FER, NFER (but not CER) */
+ pci_hose_write_config_dword(hose, dev, pci_dcr, temp32);
+
+#if defined(CONFIG_FSL_PCIE_DISABLE_ASPM)
+ pci_lcr = pcie_cap_pos + 0x10;
+ temp32 = 0;
+ pci_hose_read_config_dword(hose, dev, pci_lcr, &temp32);
+ temp32 &= ~0x03; /* Disable ASPM */
+ pci_hose_write_config_dword(hose, dev, pci_lcr, temp32);
+ udelay(1);
+#endif
+ if (pcie_cap == PCI_CAP_ID_EXP) {
+ if (block_rev >= PEX_IP_BLK_REV_3_0) {
+#define PEX_CSR0_LTSSM_MASK 0xFC
+#define PEX_CSR0_LTSSM_SHIFT 2
+ ltssm = (in_be32(&pci->pex_csr0)
+ & PEX_CSR0_LTSSM_MASK) >> PEX_CSR0_LTSSM_SHIFT;
+ enabled = (ltssm == 0x11) ? 1 : 0;
+ } else {
+ /* pci_hose_read_config_word(hose, dev, PCI_LTSSM, <ssm); */
+ /* enabled = ltssm >= PCI_LTSSM_L0; */
+ pci_hose_read_config_word(hose, dev, PCI_LTSSM, <ssm);
+ enabled = ltssm >= PCI_LTSSM_L0;
+
+#ifdef CONFIG_FSL_PCIE_RESET
+ if (ltssm == 1) {
+ int i;
+ debug("....PCIe link error. " "LTSSM=0x%02x.", ltssm);
+ /* assert PCIe reset */
+ setbits_be32(&pci->pdb_stat, 0x08000000);
+ (void) in_be32(&pci->pdb_stat);
+ udelay(100);
+ debug(" Asserting PCIe reset @%p = %x\n",
+ &pci->pdb_stat, in_be32(&pci->pdb_stat));
+ /* clear PCIe reset */
+ clrbits_be32(&pci->pdb_stat, 0x08000000);
+ asm("sync;isync");
+ for (i=0; i<100 && ltssm < PCI_LTSSM_L0; i++) {
+ pci_hose_read_config_word(hose, dev, PCI_LTSSM,
+ <ssm);
+ udelay(1000);
+ debug("....PCIe link error. "
+ "LTSSM=0x%02x.\n", ltssm);
+ }
+ enabled = ltssm >= PCI_LTSSM_L0;
+
+ /* we need to re-write the bar0 since a reset will
+ * clear it
+ */
+ pci_hose_write_config_dword(hose, dev,
+ PCI_BASE_ADDRESS_0, pcicsrbar);
+ }
+#endif
+ }
+
+#ifdef CONFIG_SYS_P4080_ERRATUM_PCIE_A003
+ if (enabled == 0) {
+ serdes_corenet_t *srds_regs = (void *)CONFIG_SYS_FSL_CORENET_SERDES_ADDR;
+ temp32 = in_be32(&srds_regs->srdspccr0);
+
+ if ((temp32 >> 28) == 3) {
+ int i;
+
+ out_be32(&srds_regs->srdspccr0, 2 << 28);
+ setbits_be32(&pci->pdb_stat, 0x08000000);
+ in_be32(&pci->pdb_stat);
+ udelay(100);
+ clrbits_be32(&pci->pdb_stat, 0x08000000);
+ asm("sync;isync");
+ for (i=0; i < 100 && ltssm < PCI_LTSSM_L0; i++) {
+ pci_hose_read_config_word(hose, dev, PCI_LTSSM, <ssm);
+ udelay(1000);
+ }
+ enabled = ltssm >= PCI_LTSSM_L0;
+ }
+ }
+#endif
+ if (!enabled) {
+ /* Let the user know there's no PCIe link */
+ printf("no link, regs @ 0x%lx\n", pci_info->regs);
+ hose->last_busno = hose->first_busno;
+ return;
+ }
+
+ out_be32(&pci->pme_msg_det, 0xffffffff);
+ out_be32(&pci->pme_msg_int_en, 0xffffffff);
+
+ /* Print the negotiated PCIe link width */
+ pci_hose_read_config_word(hose, dev, pci_lsr, &temp16);
+ printf("x%d gen%d, regs @ 0x%lx\n", (temp16 & 0x3f0) >> 4,
+ (temp16 & 0xf), pci_info->regs);
+
+ hose->current_busno++; /* Start scan with secondary */
+ pciauto_prescan_setup_bridge(hose, dev, hose->current_busno);
+ }
+
+ /* Use generic setup_device to initialize standard pci regs,
+ * but do not allocate any windows since any BAR found (such
+ * as PCSRBAR) is not in this cpu's memory space.
+ */
+ pciauto_setup_device(hose, dev, 0, hose->pci_mem,
+ hose->pci_prefetch, hose->pci_io);
+
+ if (inbound) {
+ pci_hose_read_config_word(hose, dev, PCI_COMMAND, &temp16);
+ pci_hose_write_config_word(hose, dev, PCI_COMMAND,
+ temp16 | PCI_COMMAND_MEMORY);
+ }
+
+#ifndef CONFIG_PCI_NOSCAN
+ if (!fsl_is_pci_agent(hose)) {
+ debug(" Scanning PCI bus %02x\n",
+ hose->current_busno);
+ hose->last_busno = pci_hose_scan_bus(hose, hose->current_busno);
+ } else {
+ debug(" Not scanning PCI bus %02x. PI=%x\n",
+ hose->current_busno, temp8);
+ hose->last_busno = hose->current_busno;
+ }
+
+ /* if we are PCIe - update limit regs and subordinate busno
+ * for the virtual P2P bridge
+ */
+ if (pcie_cap == PCI_CAP_ID_EXP) {
+ pciauto_postscan_setup_bridge(hose, dev, hose->last_busno);
+ }
+#else
+ hose->last_busno = hose->current_busno;
+#endif
+
+ /* Clear all error indications */
+ if (pcie_cap == PCI_CAP_ID_EXP)
+ out_be32(&pci->pme_msg_det, 0xffffffff);
+ out_be32(&pci->pedr, 0xffffffff);
+
+ pci_hose_read_config_word(hose, dev, pci_dsr, &temp16);
+ if (temp16) {
+ pci_hose_write_config_word(hose, dev, pci_dsr, 0xffff);
+ }
+
+ pci_hose_read_config_word (hose, dev, PCI_SEC_STATUS, &temp16);
+ if (temp16) {
+ pci_hose_write_config_word(hose, dev, PCI_SEC_STATUS, 0xffff);
+ }
+}
+
+int fsl_is_pci_agent(struct pci_controller *hose)
+{
+ int pcie_cap_pos;
+ u8 pcie_cap;
+ pci_dev_t dev = PCI_BDF(hose->first_busno, 0, 0);
+
+ pcie_cap_pos = pci_hose_find_capability(hose, dev, PCI_CAP_ID_EXP);
+ pci_hose_read_config_byte(hose, dev, pcie_cap_pos, &pcie_cap);
+ if (pcie_cap == PCI_CAP_ID_EXP) {
+ u8 header_type;
+
+ pci_hose_read_config_byte(hose, dev, PCI_HEADER_TYPE,
+ &header_type);
+ return (header_type & 0x7f) == PCI_HEADER_TYPE_NORMAL;
+ } else {
+ u8 prog_if;
+
+ pci_hose_read_config_byte(hose, dev, PCI_CLASS_PROG, &prog_if);
+ /* Programming Interface (PCI_CLASS_PROG)
+ * 0 == pci host or pcie root-complex,
+ * 1 == pci agent or pcie end-point
+ */
+ return (prog_if == FSL_PROG_IF_AGENT);
+ }
+}
+
+int fsl_pci_init_port(struct fsl_pci_info *pci_info,
+ struct pci_controller *hose, int busno)
+{
+ volatile ccsr_fsl_pci_t *pci;
+ struct pci_region *r;
+ pci_dev_t dev = PCI_BDF(busno,0,0);
+ int pcie_cap_pos;
+ u8 pcie_cap;
+
+ pci = (ccsr_fsl_pci_t *) pci_info->regs;
+
+ /* on non-PCIe controllers we don't have pme_msg_det so this code
+ * should do nothing since the read will return 0
+ */
+ if (in_be32(&pci->pme_msg_det)) {
+ out_be32(&pci->pme_msg_det, 0xffffffff);
+ debug (" with errors. Clearing. Now 0x%08x",
+ pci->pme_msg_det);
+ }
+
+ r = hose->regions + hose->region_count;
+
+ /* outbound memory */
+ pci_set_region(r++,
+ pci_info->mem_bus,
+ pci_info->mem_phys,
+ pci_info->mem_size,
+ PCI_REGION_MEM);
+
+ /* outbound io */
+ pci_set_region(r++,
+ pci_info->io_bus,
+ pci_info->io_phys,
+ pci_info->io_size,
+ PCI_REGION_IO);
+
+ hose->region_count = r - hose->regions;
+ hose->first_busno = busno;
+
+ fsl_pci_init(hose, pci_info);
+
+ if (fsl_is_pci_agent(hose)) {
+ fsl_pci_config_unlock(hose);
+ hose->last_busno = hose->first_busno;
+#ifdef CONFIG_SRIO_PCIE_BOOT_MASTER
+ } else {
+ /* boot from PCIE --master releases slave's core 0 */
+ char *s = getenv("bootmaster");
+ char pcie[6];
+ sprintf(pcie, "PCIE%d", pci_info->pci_num);
+
+ if (s && (strcmp(s, pcie) == 0))
+ fsl_pcie_boot_master_release_slave(pci_info->pci_num);
+#endif
+ }
+
+ pcie_cap_pos = pci_hose_find_capability(hose, dev, PCI_CAP_ID_EXP);
+ pci_hose_read_config_byte(hose, dev, pcie_cap_pos, &pcie_cap);
+ printf("PCI%s%x: Bus %02x - %02x\n", pcie_cap == PCI_CAP_ID_EXP ?
+ "e" : "", pci_info->pci_num,
+ hose->first_busno, hose->last_busno);
+ return(hose->last_busno + 1);
+}
+
+/* Enable inbound PCI config cycles for agent/endpoint interface */
+void fsl_pci_config_unlock(struct pci_controller *hose)
+{
+ pci_dev_t dev = PCI_BDF(hose->first_busno,0,0);
+ int pcie_cap_pos;
+ u8 pcie_cap;
+ u16 pbfr;
+
+ if (!fsl_is_pci_agent(hose))
+ return;
+
+ pcie_cap_pos = pci_hose_find_capability(hose, dev, PCI_CAP_ID_EXP);
+ pci_hose_read_config_byte(hose, dev, pcie_cap_pos, &pcie_cap);
+ if (pcie_cap != 0x0) {
+ /* PCIe - set CFG_READY bit of Configuration Ready Register */
+ pci_hose_write_config_byte(hose, dev, FSL_PCIE_CFG_RDY, 0x1);
+ } else {
+ /* PCI - clear ACL bit of PBFR */
+ pci_hose_read_config_word(hose, dev, FSL_PCI_PBFR, &pbfr);
+ pbfr &= ~0x20;
+ pci_hose_write_config_word(hose, dev, FSL_PCI_PBFR, pbfr);
+ }
+}
+
+#if defined(CONFIG_PCIE1) || defined(CONFIG_PCIE2) || \
+ defined(CONFIG_PCIE3) || defined(CONFIG_PCIE4)
+int fsl_configure_pcie(struct fsl_pci_info *info,
+ struct pci_controller *hose,
+ const char *connected, int busno)
+{
+ int is_endpoint;
+
+ set_next_law(info->mem_phys, law_size_bits(info->mem_size), info->law);
+ set_next_law(info->io_phys, law_size_bits(info->io_size), info->law);
+
+ is_endpoint = fsl_setup_hose(hose, info->regs);
+ printf("PCIe%u: %s", info->pci_num,
+ is_endpoint ? "Endpoint" : "Root Complex");
+ if (connected)
+ printf(" of %s", connected);
+ puts(", ");
+
+ return fsl_pci_init_port(info, hose, busno);
+}
+
+#if defined(CONFIG_FSL_CORENET)
+#ifdef CONFIG_SYS_FSL_QORIQ_CHASSIS2
+ #define _DEVDISR_PCIE1 FSL_CORENET_DEVDISR3_PCIE1
+ #define _DEVDISR_PCIE2 FSL_CORENET_DEVDISR3_PCIE2
+ #define _DEVDISR_PCIE3 FSL_CORENET_DEVDISR3_PCIE3
+ #define _DEVDISR_PCIE4 FSL_CORENET_DEVDISR3_PCIE4
+#else
+ #define _DEVDISR_PCIE1 FSL_CORENET_DEVDISR_PCIE1
+ #define _DEVDISR_PCIE2 FSL_CORENET_DEVDISR_PCIE2
+ #define _DEVDISR_PCIE3 FSL_CORENET_DEVDISR_PCIE3
+ #define _DEVDISR_PCIE4 FSL_CORENET_DEVDISR_PCIE4
+#endif
+ #define CONFIG_SYS_MPC8xxx_GUTS_ADDR CONFIG_SYS_MPC85xx_GUTS_ADDR
+#elif defined(CONFIG_MPC85xx)
+ #define _DEVDISR_PCIE1 MPC85xx_DEVDISR_PCIE
+ #define _DEVDISR_PCIE2 MPC85xx_DEVDISR_PCIE2
+ #define _DEVDISR_PCIE3 MPC85xx_DEVDISR_PCIE3
+ #define _DEVDISR_PCIE4 0
+ #define CONFIG_SYS_MPC8xxx_GUTS_ADDR CONFIG_SYS_MPC85xx_GUTS_ADDR
+#elif defined(CONFIG_MPC86xx)
+ #define _DEVDISR_PCIE1 MPC86xx_DEVDISR_PCIE1
+ #define _DEVDISR_PCIE2 MPC86xx_DEVDISR_PCIE2
+ #define _DEVDISR_PCIE3 0
+ #define _DEVDISR_PCIE4 0
+ #define CONFIG_SYS_MPC8xxx_GUTS_ADDR \
+ (&((immap_t *)CONFIG_SYS_IMMR)->im_gur)
+#else
+#error "No defines for DEVDISR_PCIE"
+#endif
+
+/* Implement a dummy function for those platforms w/o SERDES */
+static const char *__board_serdes_name(enum srds_prtcl device)
+{
+ switch (device) {
+#ifdef CONFIG_SYS_PCIE1_NAME
+ case PCIE1:
+ return CONFIG_SYS_PCIE1_NAME;
+#endif
+#ifdef CONFIG_SYS_PCIE2_NAME
+ case PCIE2:
+ return CONFIG_SYS_PCIE2_NAME;
+#endif
+#ifdef CONFIG_SYS_PCIE3_NAME
+ case PCIE3:
+ return CONFIG_SYS_PCIE3_NAME;
+#endif
+#ifdef CONFIG_SYS_PCIE4_NAME
+ case PCIE4:
+ return CONFIG_SYS_PCIE4_NAME;
+#endif
+ default:
+ return NULL;
+ }
+
+ return NULL;
+}
+
+__attribute__((weak, alias("__board_serdes_name"))) const char *
+board_serdes_name(enum srds_prtcl device);
+
+static u32 devdisr_mask[] = {
+ _DEVDISR_PCIE1,
+ _DEVDISR_PCIE2,
+ _DEVDISR_PCIE3,
+ _DEVDISR_PCIE4,
+};
+
+int fsl_pcie_init_ctrl(int busno, u32 devdisr, enum srds_prtcl dev,
+ struct fsl_pci_info *pci_info)
+{
+ struct pci_controller *hose;
+ int num = dev - PCIE1;
+
+ hose = calloc(1, sizeof(struct pci_controller));
+ if (!hose)
+ return busno;
+
+ if (is_serdes_configured(dev) && !(devdisr & devdisr_mask[num])) {
+ busno = fsl_configure_pcie(pci_info, hose,
+ board_serdes_name(dev), busno);
+ } else {
+ printf("PCIe%d: disabled\n", num + 1);
+ }
+
+ return busno;
+}
+
+int fsl_pcie_init_board(int busno)
+{
+ struct fsl_pci_info pci_info;
+ ccsr_gur_t *gur = (void *)CONFIG_SYS_MPC8xxx_GUTS_ADDR;
+ u32 devdisr;
+ u32 *addr;
+
+#ifdef CONFIG_SYS_FSL_QORIQ_CHASSIS2
+ addr = &gur->devdisr3;
+#else
+ addr = &gur->devdisr;
+#endif
+ devdisr = in_be32(addr);
+
+#ifdef CONFIG_PCIE1
+ SET_STD_PCIE_INFO(pci_info, 1);
+ busno = fsl_pcie_init_ctrl(busno, devdisr, PCIE1, &pci_info);
+#else
+ setbits_be32(addr, _DEVDISR_PCIE1); /* disable */
+#endif
+
+#ifdef CONFIG_PCIE2
+ SET_STD_PCIE_INFO(pci_info, 2);
+ busno = fsl_pcie_init_ctrl(busno, devdisr, PCIE2, &pci_info);
+#else
+ setbits_be32(addr, _DEVDISR_PCIE2); /* disable */
+#endif
+
+#ifdef CONFIG_PCIE3
+ SET_STD_PCIE_INFO(pci_info, 3);
+ busno = fsl_pcie_init_ctrl(busno, devdisr, PCIE3, &pci_info);
+#else
+ setbits_be32(addr, _DEVDISR_PCIE3); /* disable */
+#endif
+
+#ifdef CONFIG_PCIE4
+ SET_STD_PCIE_INFO(pci_info, 4);
+ busno = fsl_pcie_init_ctrl(busno, devdisr, PCIE4, &pci_info);
+#else
+ setbits_be32(addr, _DEVDISR_PCIE4); /* disable */
+#endif
+
+ return busno;
+}
+#else
+int fsl_pcie_init_ctrl(int busno, u32 devdisr, enum srds_prtcl dev,
+ struct fsl_pci_info *pci_info)
+{
+ return busno;
+}
+
+int fsl_pcie_init_board(int busno)
+{
+ return busno;
+}
+#endif
+
+#ifdef CONFIG_OF_BOARD_SETUP
+#include <libfdt.h>
+#include <fdt_support.h>
+
+void ft_fsl_pci_setup(void *blob, const char *pci_compat,
+ unsigned long ctrl_addr)
+{
+ int off;
+ u32 bus_range[2];
+ phys_addr_t p_ctrl_addr = (phys_addr_t)ctrl_addr;
+ struct pci_controller *hose;
+
+ hose = find_hose_by_cfg_addr((void *)(ctrl_addr));
+
+ /* convert ctrl_addr to true physical address */
+ p_ctrl_addr = (phys_addr_t)ctrl_addr - CONFIG_SYS_CCSRBAR;
+ p_ctrl_addr += CONFIG_SYS_CCSRBAR_PHYS;
+
+ off = fdt_node_offset_by_compat_reg(blob, pci_compat, p_ctrl_addr);
+
+ if (off < 0)
+ return;
+
+ /* We assume a cfg_addr not being set means we didn't setup the controller */
+ if ((hose == NULL) || (hose->cfg_addr == NULL)) {
+ fdt_del_node(blob, off);
+ } else {
+ bus_range[0] = 0;
+ bus_range[1] = hose->last_busno - hose->first_busno;
+ fdt_setprop(blob, off, "bus-range", &bus_range[0], 2*4);
+ fdt_pci_dma_ranges(blob, off, hose);
+ }
+}
+#endif
Code Review / kvmfornfv.git / blobdiff