Add qemu 2.4.0
[kvmfornfv.git] / qemu / roms / u-boot / drivers / net / ks8695eth.c
diff --git a/qemu/roms/u-boot/drivers/net/ks8695eth.c b/qemu/roms/u-boot/drivers/net/ks8695eth.c
new file mode 100644 (file)
index 0000000..b4822e9
--- /dev/null
@@ -0,0 +1,229 @@
+/*
+ * ks8695eth.c -- KS8695 ethernet driver
+ *
+ * (C) Copyright 2004-2005, Greg Ungerer <greg.ungerer@opengear.com>
+ *
+ * SPDX-License-Identifier:    GPL-2.0+
+ */
+
+/****************************************************************************/
+
+#include <common.h>
+#include <malloc.h>
+#include <net.h>
+#include <asm/io.h>
+#include <asm/arch/platform.h>
+
+/****************************************************************************/
+
+/*
+ * Hardware register access to the KS8695 LAN ethernet port
+ * (well, it is the 4 port switch really).
+ */
+#define        ks8695_read(a)    *((volatile unsigned long *) (KS8695_IO_BASE + (a)))
+#define        ks8695_write(a,v) *((volatile unsigned long *) (KS8695_IO_BASE + (a))) = (v)
+
+/****************************************************************************/
+
+/*
+ * Define the descriptor in-memory data structures.
+ */
+struct ks8695_txdesc {
+       uint32_t        owner;
+       uint32_t        ctrl;
+       uint32_t        addr;
+       uint32_t        next;
+};
+
+struct ks8695_rxdesc {
+       uint32_t        status;
+       uint32_t        ctrl;
+       uint32_t        addr;
+       uint32_t        next;
+};
+
+/****************************************************************************/
+
+/*
+ * Allocate local data structures to use for receiving and sending
+ * packets. Just to keep it all nice and simple.
+ */
+
+#define        TXDESCS         4
+#define        RXDESCS         4
+#define        BUFSIZE         2048
+
+volatile struct ks8695_txdesc ks8695_tx[TXDESCS] __attribute__((aligned(256)));
+volatile struct ks8695_rxdesc ks8695_rx[RXDESCS] __attribute__((aligned(256)));
+volatile uint8_t ks8695_bufs[BUFSIZE*(TXDESCS+RXDESCS)] __attribute__((aligned(2048)));;
+
+/****************************************************************************/
+
+/*
+ *     Ideally we want to use the MAC address stored in flash.
+ *     But we do some sanity checks in case they are not present
+ *     first.
+ */
+unsigned char eth_mac[] = {
+       0x00, 0x13, 0xc6, 0x00, 0x00, 0x00
+};
+
+void ks8695_getmac(void)
+{
+       unsigned char *fp;
+       int i;
+
+       /* Check if flash MAC is valid */
+       fp = (unsigned char *) 0x0201c000;
+       for (i = 0; (i < 6); i++) {
+               if ((fp[i] != 0) && (fp[i] != 0xff))
+                       break;
+       }
+
+       /* If we found a valid looking MAC address then use it */
+       if (i < 6)
+               memcpy(&eth_mac[0], fp, 6);
+}
+
+/****************************************************************************/
+
+static int ks8695_eth_init(struct eth_device *dev, bd_t *bd)
+{
+       int i;
+
+       debug ("%s(%d): eth_reset()\n", __FILE__, __LINE__);
+
+       /* Reset the ethernet engines first */
+       ks8695_write(KS8695_LAN_DMA_TX, 0x80000000);
+       ks8695_write(KS8695_LAN_DMA_RX, 0x80000000);
+
+       ks8695_getmac();
+
+       /* Set MAC address */
+       ks8695_write(KS8695_LAN_MAC_LOW, (eth_mac[5] | (eth_mac[4] << 8) |
+               (eth_mac[3] << 16) | (eth_mac[2] << 24)));
+       ks8695_write(KS8695_LAN_MAC_HIGH, (eth_mac[1] | (eth_mac[0] << 8)));
+
+       /* Turn the 4 port switch on */
+       i = ks8695_read(KS8695_SWITCH_CTRL0);
+       ks8695_write(KS8695_SWITCH_CTRL0, (i | 0x1));
+       /* ks8695_write(KS8695_WAN_CONTROL, 0x3f000066); */
+
+       /* Initialize descriptor rings */
+       for (i = 0; (i < TXDESCS); i++) {
+               ks8695_tx[i].owner = 0;
+               ks8695_tx[i].ctrl = 0;
+               ks8695_tx[i].addr = (uint32_t) &ks8695_bufs[i*BUFSIZE];
+               ks8695_tx[i].next = (uint32_t) &ks8695_tx[i+1];
+       }
+       ks8695_tx[TXDESCS-1].ctrl = 0x02000000;
+       ks8695_tx[TXDESCS-1].next = (uint32_t) &ks8695_tx[0];
+
+       for (i = 0; (i < RXDESCS); i++) {
+               ks8695_rx[i].status = 0x80000000;
+               ks8695_rx[i].ctrl = BUFSIZE - 4;
+               ks8695_rx[i].addr = (uint32_t) &ks8695_bufs[(i+TXDESCS)*BUFSIZE];
+               ks8695_rx[i].next = (uint32_t) &ks8695_rx[i+1];
+       }
+       ks8695_rx[RXDESCS-1].ctrl |= 0x00080000;
+       ks8695_rx[RXDESCS-1].next = (uint32_t) &ks8695_rx[0];
+
+       /* The KS8695 is pretty slow reseting the ethernets... */
+       udelay(2000000);
+
+       /* Enable the ethernet engine */
+       ks8695_write(KS8695_LAN_TX_LIST, (uint32_t) &ks8695_tx[0]);
+       ks8695_write(KS8695_LAN_RX_LIST, (uint32_t) &ks8695_rx[0]);
+       ks8695_write(KS8695_LAN_DMA_TX, 0x3);
+       ks8695_write(KS8695_LAN_DMA_RX, 0x71);
+       ks8695_write(KS8695_LAN_DMA_RX_START, 0x1);
+
+       printf("KS8695 ETHERNET: %pM\n", eth_mac);
+       return 0;
+}
+
+/****************************************************************************/
+
+static void ks8695_eth_halt(struct eth_device *dev)
+{
+       debug ("%s(%d): eth_halt()\n", __FILE__, __LINE__);
+
+       /* Reset the ethernet engines */
+       ks8695_write(KS8695_LAN_DMA_TX, 0x80000000);
+       ks8695_write(KS8695_LAN_DMA_RX, 0x80000000);
+}
+
+/****************************************************************************/
+
+static int ks8695_eth_recv(struct eth_device *dev)
+{
+       volatile struct ks8695_rxdesc *dp;
+       int i, len = 0;
+
+       debug ("%s(%d): eth_rx()\n", __FILE__, __LINE__);
+
+       for (i = 0; (i < RXDESCS); i++) {
+               dp= &ks8695_rx[i];
+               if ((dp->status & 0x80000000) == 0) {
+                       len = (dp->status & 0x7ff) - 4;
+                       NetReceive((void *) dp->addr, len);
+                       dp->status = 0x80000000;
+                       ks8695_write(KS8695_LAN_DMA_RX_START, 0x1);
+                       break;
+               }
+       }
+
+       return len;
+}
+
+/****************************************************************************/
+
+static int ks8695_eth_send(struct eth_device *dev, void *packet, int len)
+{
+       volatile struct ks8695_txdesc *dp;
+       static int next = 0;
+
+       debug ("%s(%d): eth_send(packet=%p,len=%d)\n", __FILE__, __LINE__,
+               packet, len);
+
+       dp = &ks8695_tx[next];
+       memcpy((void *) dp->addr, (void *) packet, len);
+
+       if (len < 64) {
+               memset((void *) (dp->addr + len), 0, 64-len);
+               len = 64;
+       }
+
+       dp->ctrl = len | 0xe0000000;
+       dp->owner = 0x80000000;
+
+       ks8695_write(KS8695_LAN_DMA_TX, 0x3);
+       ks8695_write(KS8695_LAN_DMA_TX_START, 0x1);
+
+       if (++next >= TXDESCS)
+               next = 0;
+
+       return 0;
+}
+
+/****************************************************************************/
+
+int ks8695_eth_initialize(void)
+{
+       struct eth_device *dev;
+
+       dev = malloc(sizeof(*dev));
+       if (dev == NULL)
+               return -1;
+       memset(dev, 0, sizeof(*dev));
+
+       dev->iobase = KS8695_IO_BASE + KS8695_LAN_DMA_TX;
+       dev->init = ks8695_eth_init;
+       dev->halt = ks8695_eth_halt;
+       dev->send = ks8695_eth_send;
+       dev->recv = ks8695_eth_recv;
+       strcpy(dev->name, "ks8695eth");
+
+       eth_register(dev);
+       return 0;
+}