Add qemu 2.4.0

[kvmfornfv.git] / qemu / roms / u-boot / drivers / net / fm / tgec_phy.c

diff --git a/qemu/roms/u-boot/drivers/net/fm/tgec_phy.c b/qemu/roms/u-boot/drivers/net/fm/tgec_phy.c
new file mode 100644 (file)
index 0000000..faec317
--- /dev/null
+++ b/qemu/roms/u-boot/drivers/net/fm/tgec_phy.c
@@ -0,0 +1,126 @@
+/*
+ * Copyright 2009-2011 Freescale Semiconductor, Inc.
+ *     Andy Fleming <afleming@freescale.com>
+ *
+ * SPDX-License-Identifier:    GPL-2.0+
+ * Some part is taken from tsec.c
+ */
+#include <common.h>
+#include <miiphy.h>
+#include <phy.h>
+#include <asm/io.h>
+#include <asm/fsl_tgec.h>
+#include <fm_eth.h>
+
+/*
+ * Write value to the PHY for this device to the register at regnum, waiting
+ * until the write is done before it returns.  All PHY configuration has to be
+ * done through the TSEC1 MIIM regs
+ */
+static int tgec_mdio_write(struct mii_dev *bus, int port_addr, int dev_addr,
+                          int regnum, u16 value)
+{
+       u32 mdio_ctl;
+       u32 stat_val;
+       struct tgec_mdio_controller *regs = bus->priv;
+
+       if (dev_addr == MDIO_DEVAD_NONE)
+               return 0;
+
+       /* Wait till the bus is free */
+       stat_val = MDIO_STAT_CLKDIV(100);
+       out_be32(&regs->mdio_stat, stat_val);
+       while ((in_be32(&regs->mdio_stat)) & MDIO_STAT_BSY)
+               ;
+
+       /* Set the port and dev addr */
+       mdio_ctl = MDIO_CTL_PORT_ADDR(port_addr) | MDIO_CTL_DEV_ADDR(dev_addr);
+       out_be32(&regs->mdio_ctl, mdio_ctl);
+
+       /* Set the register address */
+       out_be32(&regs->mdio_addr, regnum & 0xffff);
+
+       /* Wait till the bus is free */
+       while ((in_be32(&regs->mdio_stat)) & MDIO_STAT_BSY)
+               ;
+
+       /* Write the value to the register */
+       out_be32(&regs->mdio_data, MDIO_DATA(value));
+
+       /* Wait till the MDIO write is complete */
+       while ((in_be32(&regs->mdio_data)) & MDIO_DATA_BSY)
+               ;
+
+       return 0;
+}
+
+/*
+ * Reads from register regnum in the PHY for device dev, returning the value.
+ * Clears miimcom first.  All PHY configuration has to be done through the
+ * TSEC1 MIIM regs
+ */
+static int tgec_mdio_read(struct mii_dev *bus, int port_addr, int dev_addr,
+                         int regnum)
+{
+       u32 mdio_ctl;
+       u32 stat_val;
+       struct tgec_mdio_controller *regs = bus->priv;
+
+       if (dev_addr == MDIO_DEVAD_NONE)
+               return 0xffff;
+
+       stat_val = MDIO_STAT_CLKDIV(100);
+       out_be32(&regs->mdio_stat, stat_val);
+       /* Wait till the bus is free */
+       while ((in_be32(&regs->mdio_stat)) & MDIO_STAT_BSY)
+               ;
+
+       /* Set the Port and Device Addrs */
+       mdio_ctl = MDIO_CTL_PORT_ADDR(port_addr) | MDIO_CTL_DEV_ADDR(dev_addr);
+       out_be32(&regs->mdio_ctl, mdio_ctl);
+
+       /* Set the register address */
+       out_be32(&regs->mdio_addr, regnum & 0xffff);
+
+       /* Wait till the bus is free */
+       while ((in_be32(&regs->mdio_stat)) & MDIO_STAT_BSY)
+               ;
+
+       /* Initiate the read */
+       mdio_ctl |= MDIO_CTL_READ;
+       out_be32(&regs->mdio_ctl, mdio_ctl);
+
+       /* Wait till the MDIO write is complete */
+       while ((in_be32(&regs->mdio_data)) & MDIO_DATA_BSY)
+               ;
+
+       /* Return all Fs if nothing was there */
+       if (in_be32(&regs->mdio_stat) & MDIO_STAT_RD_ER)
+               return 0xffff;
+
+       return in_be32(&regs->mdio_data) & 0xffff;
+}
+
+static int tgec_mdio_reset(struct mii_dev *bus)
+{
+       return 0;
+}
+
+int fm_tgec_mdio_init(bd_t *bis, struct tgec_mdio_info *info)
+{
+       struct mii_dev *bus = mdio_alloc();
+
+       if (!bus) {
+               printf("Failed to allocate FM TGEC MDIO bus\n");
+               return -1;
+       }
+
+       bus->read = tgec_mdio_read;
+       bus->write = tgec_mdio_write;
+       bus->reset = tgec_mdio_reset;
+       sprintf(bus->name, info->name);
+
+       bus->priv = info->regs;
+
+       return mdio_register(bus);
+}