--- /dev/null
+/*
+ * SPI flash probing
+ *
+ * Copyright (C) 2008 Atmel Corporation
+ * Copyright (C) 2010 Reinhard Meyer, EMK Elektronik
+ * Copyright (C) 2013 Jagannadha Sutradharudu Teki, Xilinx Inc.
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#include <common.h>
+#include <fdtdec.h>
+#include <malloc.h>
+#include <spi.h>
+#include <spi_flash.h>
+#include <asm/io.h>
+
+#include "sf_internal.h"
+
+DECLARE_GLOBAL_DATA_PTR;
+
+/* Read commands array */
+static u8 spi_read_cmds_array[] = {
+ CMD_READ_ARRAY_SLOW,
+ CMD_READ_DUAL_OUTPUT_FAST,
+ CMD_READ_DUAL_IO_FAST,
+ CMD_READ_QUAD_OUTPUT_FAST,
+ CMD_READ_QUAD_IO_FAST,
+};
+
+#ifdef CONFIG_SPI_FLASH_MACRONIX
+static int spi_flash_set_qeb_mxic(struct spi_flash *flash)
+{
+ u8 qeb_status;
+ int ret;
+
+ ret = spi_flash_cmd_read_status(flash, &qeb_status);
+ if (ret < 0)
+ return ret;
+
+ if (qeb_status & STATUS_QEB_MXIC) {
+ debug("SF: mxic: QEB is already set\n");
+ } else {
+ ret = spi_flash_cmd_write_status(flash, STATUS_QEB_MXIC);
+ if (ret < 0)
+ return ret;
+ }
+
+ return ret;
+}
+#endif
+
+#if defined(CONFIG_SPI_FLASH_SPANSION) || defined(CONFIG_SPI_FLASH_WINBOND)
+static int spi_flash_set_qeb_winspan(struct spi_flash *flash)
+{
+ u8 qeb_status;
+ int ret;
+
+ ret = spi_flash_cmd_read_config(flash, &qeb_status);
+ if (ret < 0)
+ return ret;
+
+ if (qeb_status & STATUS_QEB_WINSPAN) {
+ debug("SF: winspan: QEB is already set\n");
+ } else {
+ ret = spi_flash_cmd_write_config(flash, STATUS_QEB_WINSPAN);
+ if (ret < 0)
+ return ret;
+ }
+
+ return ret;
+}
+#endif
+
+static int spi_flash_set_qeb(struct spi_flash *flash, u8 idcode0)
+{
+ switch (idcode0) {
+#ifdef CONFIG_SPI_FLASH_MACRONIX
+ case SPI_FLASH_CFI_MFR_MACRONIX:
+ return spi_flash_set_qeb_mxic(flash);
+#endif
+#if defined(CONFIG_SPI_FLASH_SPANSION) || defined(CONFIG_SPI_FLASH_WINBOND)
+ case SPI_FLASH_CFI_MFR_SPANSION:
+ case SPI_FLASH_CFI_MFR_WINBOND:
+ return spi_flash_set_qeb_winspan(flash);
+#endif
+#ifdef CONFIG_SPI_FLASH_STMICRO
+ case SPI_FLASH_CFI_MFR_STMICRO:
+ debug("SF: QEB is volatile for %02x flash\n", idcode0);
+ return 0;
+#endif
+ default:
+ printf("SF: Need set QEB func for %02x flash\n", idcode0);
+ return -1;
+ }
+}
+
+static struct spi_flash *spi_flash_validate_params(struct spi_slave *spi,
+ u8 *idcode)
+{
+ const struct spi_flash_params *params;
+ struct spi_flash *flash;
+ u8 cmd;
+ u16 jedec = idcode[1] << 8 | idcode[2];
+ u16 ext_jedec = idcode[3] << 8 | idcode[4];
+
+ params = spi_flash_params_table;
+ for (; params->name != NULL; params++) {
+ if ((params->jedec >> 16) == idcode[0]) {
+ if ((params->jedec & 0xFFFF) == jedec) {
+ if (params->ext_jedec == 0)
+ break;
+ else if (params->ext_jedec == ext_jedec)
+ break;
+ }
+ }
+ }
+
+ if (!params->name) {
+ printf("SF: Unsupported flash IDs: ");
+ printf("manuf %02x, jedec %04x, ext_jedec %04x\n",
+ idcode[0], jedec, ext_jedec);
+ return NULL;
+ }
+
+ flash = calloc(1, sizeof(*flash));
+ if (!flash) {
+ debug("SF: Failed to allocate spi_flash\n");
+ return NULL;
+ }
+
+ /* Assign spi data */
+ flash->spi = spi;
+ flash->name = params->name;
+ flash->memory_map = spi->memory_map;
+ flash->dual_flash = flash->spi->option;
+
+ /* Assign spi_flash ops */
+ flash->write = spi_flash_cmd_write_ops;
+#ifdef CONFIG_SPI_FLASH_SST
+ if (params->flags & SST_WP)
+ flash->write = sst_write_wp;
+#endif
+ flash->erase = spi_flash_cmd_erase_ops;
+ flash->read = spi_flash_cmd_read_ops;
+
+ /* Compute the flash size */
+ flash->shift = (flash->dual_flash & SF_DUAL_PARALLEL_FLASH) ? 1 : 0;
+ /*
+ * The Spansion S25FL032P and S25FL064P have 256b pages, yet use the
+ * 0x4d00 Extended JEDEC code. The rest of the Spansion flashes with
+ * the 0x4d00 Extended JEDEC code have 512b pages. All of the others
+ * have 256b pages.
+ */
+ if (ext_jedec == 0x4d00) {
+ if ((jedec == 0x0215) || (jedec == 0x216))
+ flash->page_size = 256;
+ else
+ flash->page_size = 512;
+ } else {
+ flash->page_size = 256;
+ }
+ flash->page_size <<= flash->shift;
+ flash->sector_size = params->sector_size << flash->shift;
+ flash->size = flash->sector_size * params->nr_sectors << flash->shift;
+#ifdef CONFIG_SF_DUAL_FLASH
+ if (flash->dual_flash & SF_DUAL_STACKED_FLASH)
+ flash->size <<= 1;
+#endif
+
+ /* Compute erase sector and command */
+ if (params->flags & SECT_4K) {
+ flash->erase_cmd = CMD_ERASE_4K;
+ flash->erase_size = 4096 << flash->shift;
+ } else if (params->flags & SECT_32K) {
+ flash->erase_cmd = CMD_ERASE_32K;
+ flash->erase_size = 32768 << flash->shift;
+ } else {
+ flash->erase_cmd = CMD_ERASE_64K;
+ flash->erase_size = flash->sector_size;
+ }
+
+ /* Look for the fastest read cmd */
+ cmd = fls(params->e_rd_cmd & flash->spi->op_mode_rx);
+ if (cmd) {
+ cmd = spi_read_cmds_array[cmd - 1];
+ flash->read_cmd = cmd;
+ } else {
+ /* Go for default supported read cmd */
+ flash->read_cmd = CMD_READ_ARRAY_FAST;
+ }
+
+ /* Not require to look for fastest only two write cmds yet */
+ if (params->flags & WR_QPP && flash->spi->op_mode_tx & SPI_OPM_TX_QPP)
+ flash->write_cmd = CMD_QUAD_PAGE_PROGRAM;
+ else
+ /* Go for default supported write cmd */
+ flash->write_cmd = CMD_PAGE_PROGRAM;
+
+ /* Set the quad enable bit - only for quad commands */
+ if ((flash->read_cmd == CMD_READ_QUAD_OUTPUT_FAST) ||
+ (flash->read_cmd == CMD_READ_QUAD_IO_FAST) ||
+ (flash->write_cmd == CMD_QUAD_PAGE_PROGRAM)) {
+ if (spi_flash_set_qeb(flash, idcode[0])) {
+ debug("SF: Fail to set QEB for %02x\n", idcode[0]);
+ return NULL;
+ }
+ }
+
+ /* Read dummy_byte: dummy byte is determined based on the
+ * dummy cycles of a particular command.
+ * Fast commands - dummy_byte = dummy_cycles/8
+ * I/O commands- dummy_byte = (dummy_cycles * no.of lines)/8
+ * For I/O commands except cmd[0] everything goes on no.of lines
+ * based on particular command but incase of fast commands except
+ * data all go on single line irrespective of command.
+ */
+ switch (flash->read_cmd) {
+ case CMD_READ_QUAD_IO_FAST:
+ flash->dummy_byte = 2;
+ break;
+ case CMD_READ_ARRAY_SLOW:
+ flash->dummy_byte = 0;
+ break;
+ default:
+ flash->dummy_byte = 1;
+ }
+
+ /* Poll cmd selection */
+ flash->poll_cmd = CMD_READ_STATUS;
+#ifdef CONFIG_SPI_FLASH_STMICRO
+ if (params->flags & E_FSR)
+ flash->poll_cmd = CMD_FLAG_STATUS;
+#endif
+
+ /* Configure the BAR - discover bank cmds and read current bank */
+#ifdef CONFIG_SPI_FLASH_BAR
+ u8 curr_bank = 0;
+ if (flash->size > SPI_FLASH_16MB_BOUN) {
+ flash->bank_read_cmd = (idcode[0] == 0x01) ?
+ CMD_BANKADDR_BRRD : CMD_EXTNADDR_RDEAR;
+ flash->bank_write_cmd = (idcode[0] == 0x01) ?
+ CMD_BANKADDR_BRWR : CMD_EXTNADDR_WREAR;
+
+ if (spi_flash_read_common(flash, &flash->bank_read_cmd, 1,
+ &curr_bank, 1)) {
+ debug("SF: fail to read bank addr register\n");
+ return NULL;
+ }
+ flash->bank_curr = curr_bank;
+ } else {
+ flash->bank_curr = curr_bank;
+ }
+#endif
+
+ /* Flash powers up read-only, so clear BP# bits */
+#if defined(CONFIG_SPI_FLASH_ATMEL) || \
+ defined(CONFIG_SPI_FLASH_MACRONIX) || \
+ defined(CONFIG_SPI_FLASH_SST)
+ spi_flash_cmd_write_status(flash, 0);
+#endif
+
+ return flash;
+}
+
+#ifdef CONFIG_OF_CONTROL
+int spi_flash_decode_fdt(const void *blob, struct spi_flash *flash)
+{
+ fdt_addr_t addr;
+ fdt_size_t size;
+ int node;
+
+ /* If there is no node, do nothing */
+ node = fdtdec_next_compatible(blob, 0, COMPAT_GENERIC_SPI_FLASH);
+ if (node < 0)
+ return 0;
+
+ addr = fdtdec_get_addr_size(blob, node, "memory-map", &size);
+ if (addr == FDT_ADDR_T_NONE) {
+ debug("%s: Cannot decode address\n", __func__);
+ return 0;
+ }
+
+ if (flash->size != size) {
+ debug("%s: Memory map must cover entire device\n", __func__);
+ return -1;
+ }
+ flash->memory_map = map_sysmem(addr, size);
+
+ return 0;
+}
+#endif /* CONFIG_OF_CONTROL */
+
+static struct spi_flash *spi_flash_probe_slave(struct spi_slave *spi)
+{
+ struct spi_flash *flash = NULL;
+ u8 idcode[5];
+ int ret;
+
+ /* Setup spi_slave */
+ if (!spi) {
+ printf("SF: Failed to set up slave\n");
+ return NULL;
+ }
+
+ /* Claim spi bus */
+ ret = spi_claim_bus(spi);
+ if (ret) {
+ debug("SF: Failed to claim SPI bus: %d\n", ret);
+ goto err_claim_bus;
+ }
+
+ /* Read the ID codes */
+ ret = spi_flash_cmd(spi, CMD_READ_ID, idcode, sizeof(idcode));
+ if (ret) {
+ printf("SF: Failed to get idcodes\n");
+ goto err_read_id;
+ }
+
+#ifdef DEBUG
+ printf("SF: Got idcodes\n");
+ print_buffer(0, idcode, 1, sizeof(idcode), 0);
+#endif
+
+ /* Validate params from spi_flash_params table */
+ flash = spi_flash_validate_params(spi, idcode);
+ if (!flash)
+ goto err_read_id;
+
+#ifdef CONFIG_OF_CONTROL
+ if (spi_flash_decode_fdt(gd->fdt_blob, flash)) {
+ debug("SF: FDT decode error\n");
+ goto err_read_id;
+ }
+#endif
+#ifndef CONFIG_SPL_BUILD
+ printf("SF: Detected %s with page size ", flash->name);
+ print_size(flash->page_size, ", erase size ");
+ print_size(flash->erase_size, ", total ");
+ print_size(flash->size, "");
+ if (flash->memory_map)
+ printf(", mapped at %p", flash->memory_map);
+ puts("\n");
+#endif
+#ifndef CONFIG_SPI_FLASH_BAR
+ if (((flash->dual_flash == SF_SINGLE_FLASH) &&
+ (flash->size > SPI_FLASH_16MB_BOUN)) ||
+ ((flash->dual_flash > SF_SINGLE_FLASH) &&
+ (flash->size > SPI_FLASH_16MB_BOUN << 1))) {
+ puts("SF: Warning - Only lower 16MiB accessible,");
+ puts(" Full access #define CONFIG_SPI_FLASH_BAR\n");
+ }
+#endif
+
+ /* Release spi bus */
+ spi_release_bus(spi);
+
+ return flash;
+
+err_read_id:
+ spi_release_bus(spi);
+err_claim_bus:
+ spi_free_slave(spi);
+ return NULL;
+}
+
+struct spi_flash *spi_flash_probe(unsigned int bus, unsigned int cs,
+ unsigned int max_hz, unsigned int spi_mode)
+{
+ struct spi_slave *spi;
+
+ spi = spi_setup_slave(bus, cs, max_hz, spi_mode);
+ return spi_flash_probe_slave(spi);
+}
+
+#ifdef CONFIG_OF_SPI_FLASH
+struct spi_flash *spi_flash_probe_fdt(const void *blob, int slave_node,
+ int spi_node)
+{
+ struct spi_slave *spi;
+
+ spi = spi_setup_slave_fdt(blob, slave_node, spi_node);
+ return spi_flash_probe_slave(spi);
+}
+#endif
+
+void spi_flash_free(struct spi_flash *flash)
+{
+ spi_free_slave(flash->spi);
+ free(flash);
+}
Code Review / kvmfornfv.git / blobdiff