--- /dev/null
+/*
+ * Copyright 2011, Marvell Semiconductor Inc.
+ * Lei Wen <leiwen@marvell.com>
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ *
+ * Back ported to the 8xx platform (from the 8260 platform) by
+ * Murray.Jensen@cmst.csiro.au, 27-Jan-01.
+ */
+
+#include <common.h>
+#include <malloc.h>
+#include <mmc.h>
+#include <sdhci.h>
+
+void *aligned_buffer;
+
+static void sdhci_reset(struct sdhci_host *host, u8 mask)
+{
+ unsigned long timeout;
+
+ /* Wait max 100 ms */
+ timeout = 100;
+ sdhci_writeb(host, mask, SDHCI_SOFTWARE_RESET);
+ while (sdhci_readb(host, SDHCI_SOFTWARE_RESET) & mask) {
+ if (timeout == 0) {
+ printf("%s: Reset 0x%x never completed.\n",
+ __func__, (int)mask);
+ return;
+ }
+ timeout--;
+ udelay(1000);
+ }
+}
+
+static void sdhci_cmd_done(struct sdhci_host *host, struct mmc_cmd *cmd)
+{
+ int i;
+ if (cmd->resp_type & MMC_RSP_136) {
+ /* CRC is stripped so we need to do some shifting. */
+ for (i = 0; i < 4; i++) {
+ cmd->response[i] = sdhci_readl(host,
+ SDHCI_RESPONSE + (3-i)*4) << 8;
+ if (i != 3)
+ cmd->response[i] |= sdhci_readb(host,
+ SDHCI_RESPONSE + (3-i)*4-1);
+ }
+ } else {
+ cmd->response[0] = sdhci_readl(host, SDHCI_RESPONSE);
+ }
+}
+
+static void sdhci_transfer_pio(struct sdhci_host *host, struct mmc_data *data)
+{
+ int i;
+ char *offs;
+ for (i = 0; i < data->blocksize; i += 4) {
+ offs = data->dest + i;
+ if (data->flags == MMC_DATA_READ)
+ *(u32 *)offs = sdhci_readl(host, SDHCI_BUFFER);
+ else
+ sdhci_writel(host, *(u32 *)offs, SDHCI_BUFFER);
+ }
+}
+
+static int sdhci_transfer_data(struct sdhci_host *host, struct mmc_data *data,
+ unsigned int start_addr)
+{
+ unsigned int stat, rdy, mask, timeout, block = 0;
+#ifdef CONFIG_MMC_SDMA
+ unsigned char ctrl;
+ ctrl = sdhci_readb(host, SDHCI_HOST_CONTROL);
+ ctrl &= ~SDHCI_CTRL_DMA_MASK;
+ sdhci_writeb(host, ctrl, SDHCI_HOST_CONTROL);
+#endif
+
+ timeout = 1000000;
+ rdy = SDHCI_INT_SPACE_AVAIL | SDHCI_INT_DATA_AVAIL;
+ mask = SDHCI_DATA_AVAILABLE | SDHCI_SPACE_AVAILABLE;
+ do {
+ stat = sdhci_readl(host, SDHCI_INT_STATUS);
+ if (stat & SDHCI_INT_ERROR) {
+ printf("%s: Error detected in status(0x%X)!\n",
+ __func__, stat);
+ return -1;
+ }
+ if (stat & rdy) {
+ if (!(sdhci_readl(host, SDHCI_PRESENT_STATE) & mask))
+ continue;
+ sdhci_writel(host, rdy, SDHCI_INT_STATUS);
+ sdhci_transfer_pio(host, data);
+ data->dest += data->blocksize;
+ if (++block >= data->blocks)
+ break;
+ }
+#ifdef CONFIG_MMC_SDMA
+ if (stat & SDHCI_INT_DMA_END) {
+ sdhci_writel(host, SDHCI_INT_DMA_END, SDHCI_INT_STATUS);
+ start_addr &= ~(SDHCI_DEFAULT_BOUNDARY_SIZE - 1);
+ start_addr += SDHCI_DEFAULT_BOUNDARY_SIZE;
+ sdhci_writel(host, start_addr, SDHCI_DMA_ADDRESS);
+ }
+#endif
+ if (timeout-- > 0)
+ udelay(10);
+ else {
+ printf("%s: Transfer data timeout\n", __func__);
+ return -1;
+ }
+ } while (!(stat & SDHCI_INT_DATA_END));
+ return 0;
+}
+
+/*
+ * No command will be sent by driver if card is busy, so driver must wait
+ * for card ready state.
+ * Every time when card is busy after timeout then (last) timeout value will be
+ * increased twice but only if it doesn't exceed global defined maximum.
+ * Each function call will use last timeout value. Max timeout can be redefined
+ * in board config file.
+ */
+#ifndef CONFIG_SDHCI_CMD_MAX_TIMEOUT
+#define CONFIG_SDHCI_CMD_MAX_TIMEOUT 3200
+#endif
+#define CONFIG_SDHCI_CMD_DEFAULT_TIMEOUT 100
+
+int sdhci_send_command(struct mmc *mmc, struct mmc_cmd *cmd,
+ struct mmc_data *data)
+{
+ struct sdhci_host *host = mmc->priv;
+ unsigned int stat = 0;
+ int ret = 0;
+ int trans_bytes = 0, is_aligned = 1;
+ u32 mask, flags, mode;
+ unsigned int time = 0, start_addr = 0;
+ unsigned int retry = 10000;
+ int mmc_dev = mmc->block_dev.dev;
+
+ /* Timeout unit - ms */
+ static unsigned int cmd_timeout = CONFIG_SDHCI_CMD_DEFAULT_TIMEOUT;
+
+ sdhci_writel(host, SDHCI_INT_ALL_MASK, SDHCI_INT_STATUS);
+ mask = SDHCI_CMD_INHIBIT | SDHCI_DATA_INHIBIT;
+
+ /* We shouldn't wait for data inihibit for stop commands, even
+ though they might use busy signaling */
+ if (cmd->cmdidx == MMC_CMD_STOP_TRANSMISSION)
+ mask &= ~SDHCI_DATA_INHIBIT;
+
+ while (sdhci_readl(host, SDHCI_PRESENT_STATE) & mask) {
+ if (time >= cmd_timeout) {
+ printf("%s: MMC: %d busy ", __func__, mmc_dev);
+ if (2 * cmd_timeout <= CONFIG_SDHCI_CMD_MAX_TIMEOUT) {
+ cmd_timeout += cmd_timeout;
+ printf("timeout increasing to: %u ms.\n",
+ cmd_timeout);
+ } else {
+ puts("timeout.\n");
+ return COMM_ERR;
+ }
+ }
+ time++;
+ udelay(1000);
+ }
+
+ mask = SDHCI_INT_RESPONSE;
+ if (!(cmd->resp_type & MMC_RSP_PRESENT))
+ flags = SDHCI_CMD_RESP_NONE;
+ else if (cmd->resp_type & MMC_RSP_136)
+ flags = SDHCI_CMD_RESP_LONG;
+ else if (cmd->resp_type & MMC_RSP_BUSY) {
+ flags = SDHCI_CMD_RESP_SHORT_BUSY;
+ mask |= SDHCI_INT_DATA_END;
+ } else
+ flags = SDHCI_CMD_RESP_SHORT;
+
+ if (cmd->resp_type & MMC_RSP_CRC)
+ flags |= SDHCI_CMD_CRC;
+ if (cmd->resp_type & MMC_RSP_OPCODE)
+ flags |= SDHCI_CMD_INDEX;
+ if (data)
+ flags |= SDHCI_CMD_DATA;
+
+ /* Set Transfer mode regarding to data flag */
+ if (data != 0) {
+ sdhci_writeb(host, 0xe, SDHCI_TIMEOUT_CONTROL);
+ mode = SDHCI_TRNS_BLK_CNT_EN;
+ trans_bytes = data->blocks * data->blocksize;
+ if (data->blocks > 1)
+ mode |= SDHCI_TRNS_MULTI;
+
+ if (data->flags == MMC_DATA_READ)
+ mode |= SDHCI_TRNS_READ;
+
+#ifdef CONFIG_MMC_SDMA
+ if (data->flags == MMC_DATA_READ)
+ start_addr = (unsigned int)data->dest;
+ else
+ start_addr = (unsigned int)data->src;
+ if ((host->quirks & SDHCI_QUIRK_32BIT_DMA_ADDR) &&
+ (start_addr & 0x7) != 0x0) {
+ is_aligned = 0;
+ start_addr = (unsigned int)aligned_buffer;
+ if (data->flags != MMC_DATA_READ)
+ memcpy(aligned_buffer, data->src, trans_bytes);
+ }
+
+ sdhci_writel(host, start_addr, SDHCI_DMA_ADDRESS);
+ mode |= SDHCI_TRNS_DMA;
+#endif
+ sdhci_writew(host, SDHCI_MAKE_BLKSZ(SDHCI_DEFAULT_BOUNDARY_ARG,
+ data->blocksize),
+ SDHCI_BLOCK_SIZE);
+ sdhci_writew(host, data->blocks, SDHCI_BLOCK_COUNT);
+ sdhci_writew(host, mode, SDHCI_TRANSFER_MODE);
+ }
+
+ sdhci_writel(host, cmd->cmdarg, SDHCI_ARGUMENT);
+#ifdef CONFIG_MMC_SDMA
+ flush_cache(start_addr, trans_bytes);
+#endif
+ sdhci_writew(host, SDHCI_MAKE_CMD(cmd->cmdidx, flags), SDHCI_COMMAND);
+ do {
+ stat = sdhci_readl(host, SDHCI_INT_STATUS);
+ if (stat & SDHCI_INT_ERROR)
+ break;
+ if (--retry == 0)
+ break;
+ } while ((stat & mask) != mask);
+
+ if (retry == 0) {
+ if (host->quirks & SDHCI_QUIRK_BROKEN_R1B)
+ return 0;
+ else {
+ printf("%s: Timeout for status update!\n", __func__);
+ return TIMEOUT;
+ }
+ }
+
+ if ((stat & (SDHCI_INT_ERROR | mask)) == mask) {
+ sdhci_cmd_done(host, cmd);
+ sdhci_writel(host, mask, SDHCI_INT_STATUS);
+ } else
+ ret = -1;
+
+ if (!ret && data)
+ ret = sdhci_transfer_data(host, data, start_addr);
+
+ if (host->quirks & SDHCI_QUIRK_WAIT_SEND_CMD)
+ udelay(1000);
+
+ stat = sdhci_readl(host, SDHCI_INT_STATUS);
+ sdhci_writel(host, SDHCI_INT_ALL_MASK, SDHCI_INT_STATUS);
+ if (!ret) {
+ if ((host->quirks & SDHCI_QUIRK_32BIT_DMA_ADDR) &&
+ !is_aligned && (data->flags == MMC_DATA_READ))
+ memcpy(data->dest, aligned_buffer, trans_bytes);
+ return 0;
+ }
+
+ sdhci_reset(host, SDHCI_RESET_CMD);
+ sdhci_reset(host, SDHCI_RESET_DATA);
+ if (stat & SDHCI_INT_TIMEOUT)
+ return TIMEOUT;
+ else
+ return COMM_ERR;
+}
+
+static int sdhci_set_clock(struct mmc *mmc, unsigned int clock)
+{
+ struct sdhci_host *host = mmc->priv;
+ unsigned int div, clk, timeout;
+
+ sdhci_writew(host, 0, SDHCI_CLOCK_CONTROL);
+
+ if (clock == 0)
+ return 0;
+
+ if (SDHCI_GET_VERSION(host) >= SDHCI_SPEC_300) {
+ /* Version 3.00 divisors must be a multiple of 2. */
+ if (mmc->cfg->f_max <= clock)
+ div = 1;
+ else {
+ for (div = 2; div < SDHCI_MAX_DIV_SPEC_300; div += 2) {
+ if ((mmc->cfg->f_max / div) <= clock)
+ break;
+ }
+ }
+ } else {
+ /* Version 2.00 divisors must be a power of 2. */
+ for (div = 1; div < SDHCI_MAX_DIV_SPEC_200; div *= 2) {
+ if ((mmc->cfg->f_max / div) <= clock)
+ break;
+ }
+ }
+ div >>= 1;
+
+ if (host->set_clock)
+ host->set_clock(host->index, div);
+
+ clk = (div & SDHCI_DIV_MASK) << SDHCI_DIVIDER_SHIFT;
+ clk |= ((div & SDHCI_DIV_HI_MASK) >> SDHCI_DIV_MASK_LEN)
+ << SDHCI_DIVIDER_HI_SHIFT;
+ clk |= SDHCI_CLOCK_INT_EN;
+ sdhci_writew(host, clk, SDHCI_CLOCK_CONTROL);
+
+ /* Wait max 20 ms */
+ timeout = 20;
+ while (!((clk = sdhci_readw(host, SDHCI_CLOCK_CONTROL))
+ & SDHCI_CLOCK_INT_STABLE)) {
+ if (timeout == 0) {
+ printf("%s: Internal clock never stabilised.\n",
+ __func__);
+ return -1;
+ }
+ timeout--;
+ udelay(1000);
+ }
+
+ clk |= SDHCI_CLOCK_CARD_EN;
+ sdhci_writew(host, clk, SDHCI_CLOCK_CONTROL);
+ return 0;
+}
+
+static void sdhci_set_power(struct sdhci_host *host, unsigned short power)
+{
+ u8 pwr = 0;
+
+ if (power != (unsigned short)-1) {
+ switch (1 << power) {
+ case MMC_VDD_165_195:
+ pwr = SDHCI_POWER_180;
+ break;
+ case MMC_VDD_29_30:
+ case MMC_VDD_30_31:
+ pwr = SDHCI_POWER_300;
+ break;
+ case MMC_VDD_32_33:
+ case MMC_VDD_33_34:
+ pwr = SDHCI_POWER_330;
+ break;
+ }
+ }
+
+ if (pwr == 0) {
+ sdhci_writeb(host, 0, SDHCI_POWER_CONTROL);
+ return;
+ }
+
+ if (host->quirks & SDHCI_QUIRK_NO_SIMULT_VDD_AND_POWER)
+ sdhci_writeb(host, pwr, SDHCI_POWER_CONTROL);
+
+ pwr |= SDHCI_POWER_ON;
+
+ sdhci_writeb(host, pwr, SDHCI_POWER_CONTROL);
+}
+
+void sdhci_set_ios(struct mmc *mmc)
+{
+ u32 ctrl;
+ struct sdhci_host *host = mmc->priv;
+
+ if (host->set_control_reg)
+ host->set_control_reg(host);
+
+ if (mmc->clock != host->clock)
+ sdhci_set_clock(mmc, mmc->clock);
+
+ /* Set bus width */
+ ctrl = sdhci_readb(host, SDHCI_HOST_CONTROL);
+ if (mmc->bus_width == 8) {
+ ctrl &= ~SDHCI_CTRL_4BITBUS;
+ if ((SDHCI_GET_VERSION(host) >= SDHCI_SPEC_300) ||
+ (host->quirks & SDHCI_QUIRK_USE_WIDE8))
+ ctrl |= SDHCI_CTRL_8BITBUS;
+ } else {
+ if (SDHCI_GET_VERSION(host) >= SDHCI_SPEC_300)
+ ctrl &= ~SDHCI_CTRL_8BITBUS;
+ if (mmc->bus_width == 4)
+ ctrl |= SDHCI_CTRL_4BITBUS;
+ else
+ ctrl &= ~SDHCI_CTRL_4BITBUS;
+ }
+
+ if (mmc->clock > 26000000)
+ ctrl |= SDHCI_CTRL_HISPD;
+ else
+ ctrl &= ~SDHCI_CTRL_HISPD;
+
+ if (host->quirks & SDHCI_QUIRK_NO_HISPD_BIT)
+ ctrl &= ~SDHCI_CTRL_HISPD;
+
+ sdhci_writeb(host, ctrl, SDHCI_HOST_CONTROL);
+}
+
+int sdhci_init(struct mmc *mmc)
+{
+ struct sdhci_host *host = mmc->priv;
+
+ if ((host->quirks & SDHCI_QUIRK_32BIT_DMA_ADDR) && !aligned_buffer) {
+ aligned_buffer = memalign(8, 512*1024);
+ if (!aligned_buffer) {
+ printf("%s: Aligned buffer alloc failed!!!\n",
+ __func__);
+ return -1;
+ }
+ }
+
+ sdhci_set_power(host, fls(mmc->cfg->voltages) - 1);
+
+ if (host->quirks & SDHCI_QUIRK_NO_CD) {
+ unsigned int status;
+
+ sdhci_writel(host, SDHCI_CTRL_CD_TEST_INS | SDHCI_CTRL_CD_TEST,
+ SDHCI_HOST_CONTROL);
+
+ status = sdhci_readl(host, SDHCI_PRESENT_STATE);
+ while ((!(status & SDHCI_CARD_PRESENT)) ||
+ (!(status & SDHCI_CARD_STATE_STABLE)) ||
+ (!(status & SDHCI_CARD_DETECT_PIN_LEVEL)))
+ status = sdhci_readl(host, SDHCI_PRESENT_STATE);
+ }
+
+ /* Enable only interrupts served by the SD controller */
+ sdhci_writel(host, SDHCI_INT_DATA_MASK | SDHCI_INT_CMD_MASK,
+ SDHCI_INT_ENABLE);
+ /* Mask all sdhci interrupt sources */
+ sdhci_writel(host, 0x0, SDHCI_SIGNAL_ENABLE);
+
+ return 0;
+}
+
+
+static const struct mmc_ops sdhci_ops = {
+ .send_cmd = sdhci_send_command,
+ .set_ios = sdhci_set_ios,
+ .init = sdhci_init,
+};
+
+int add_sdhci(struct sdhci_host *host, u32 max_clk, u32 min_clk)
+{
+ unsigned int caps;
+
+ host->cfg.name = host->name;
+ host->cfg.ops = &sdhci_ops;
+
+ caps = sdhci_readl(host, SDHCI_CAPABILITIES);
+#ifdef CONFIG_MMC_SDMA
+ if (!(caps & SDHCI_CAN_DO_SDMA)) {
+ printf("%s: Your controller doesn't support SDMA!!\n",
+ __func__);
+ return -1;
+ }
+#endif
+
+ if (max_clk)
+ host->cfg.f_max = max_clk;
+ else {
+ if (SDHCI_GET_VERSION(host) >= SDHCI_SPEC_300)
+ host->cfg.f_max = (caps & SDHCI_CLOCK_V3_BASE_MASK)
+ >> SDHCI_CLOCK_BASE_SHIFT;
+ else
+ host->cfg.f_max = (caps & SDHCI_CLOCK_BASE_MASK)
+ >> SDHCI_CLOCK_BASE_SHIFT;
+ host->cfg.f_max *= 1000000;
+ }
+ if (host->cfg.f_max == 0) {
+ printf("%s: Hardware doesn't specify base clock frequency\n",
+ __func__);
+ return -1;
+ }
+ if (min_clk)
+ host->cfg.f_min = min_clk;
+ else {
+ if (SDHCI_GET_VERSION(host) >= SDHCI_SPEC_300)
+ host->cfg.f_min = host->cfg.f_max /
+ SDHCI_MAX_DIV_SPEC_300;
+ else
+ host->cfg.f_min = host->cfg.f_max /
+ SDHCI_MAX_DIV_SPEC_200;
+ }
+
+ host->cfg.voltages = 0;
+ if (caps & SDHCI_CAN_VDD_330)
+ host->cfg.voltages |= MMC_VDD_32_33 | MMC_VDD_33_34;
+ if (caps & SDHCI_CAN_VDD_300)
+ host->cfg.voltages |= MMC_VDD_29_30 | MMC_VDD_30_31;
+ if (caps & SDHCI_CAN_VDD_180)
+ host->cfg.voltages |= MMC_VDD_165_195;
+
+ if (host->quirks & SDHCI_QUIRK_BROKEN_VOLTAGE)
+ host->cfg.voltages |= host->voltages;
+
+ host->cfg.host_caps = MMC_MODE_HS | MMC_MODE_HS_52MHz | MMC_MODE_4BIT;
+ if (SDHCI_GET_VERSION(host) >= SDHCI_SPEC_300) {
+ if (caps & SDHCI_CAN_DO_8BIT)
+ host->cfg.host_caps |= MMC_MODE_8BIT;
+ }
+ if (host->host_caps)
+ host->cfg.host_caps |= host->host_caps;
+
+ host->cfg.b_max = CONFIG_SYS_MMC_MAX_BLK_COUNT;
+
+ sdhci_reset(host, SDHCI_RESET_ALL);
+
+ host->mmc = mmc_create(&host->cfg, host);
+ if (host->mmc == NULL) {
+ printf("%s: mmc create fail!\n", __func__);
+ return -1;
+ }
+
+ return 0;
+}
Code Review / kvmfornfv.git / blobdiff