--- /dev/null
+/*
+ * (C) Copyright 2012 SAMSUNG Electronics
+ * Jaehoon Chung <jh80.chung@samsung.com>
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#include <common.h>
+#include <dwmmc.h>
+#include <fdtdec.h>
+#include <libfdt.h>
+#include <malloc.h>
+#include <asm/arch/dwmmc.h>
+#include <asm/arch/clk.h>
+#include <asm/arch/pinmux.h>
+
+#define DWMMC_MAX_CH_NUM 4
+#define DWMMC_MAX_FREQ 52000000
+#define DWMMC_MIN_FREQ 400000
+#define DWMMC_MMC0_CLKSEL_VAL 0x03030001
+#define DWMMC_MMC2_CLKSEL_VAL 0x03020001
+
+/*
+ * Function used as callback function to initialise the
+ * CLKSEL register for every mmc channel.
+ */
+static void exynos_dwmci_clksel(struct dwmci_host *host)
+{
+ dwmci_writel(host, DWMCI_CLKSEL, host->clksel_val);
+}
+
+unsigned int exynos_dwmci_get_clk(struct dwmci_host *host)
+{
+ unsigned long sclk;
+ int8_t clk_div;
+
+ /*
+ * Since SDCLKIN is divided inside controller by the DIVRATIO
+ * value set in the CLKSEL register, we need to use the same output
+ * clock value to calculate the CLKDIV value.
+ * as per user manual:cclk_in = SDCLKIN / (DIVRATIO + 1)
+ */
+ clk_div = ((dwmci_readl(host, DWMCI_CLKSEL) >> DWMCI_DIVRATIO_BIT)
+ & DWMCI_DIVRATIO_MASK) + 1;
+ sclk = get_mmc_clk(host->dev_index);
+
+ return sclk / clk_div;
+}
+
+static void exynos_dwmci_board_init(struct dwmci_host *host)
+{
+ if (host->quirks & DWMCI_QUIRK_DISABLE_SMU) {
+ dwmci_writel(host, EMMCP_MPSBEGIN0, 0);
+ dwmci_writel(host, EMMCP_SEND0, 0);
+ dwmci_writel(host, EMMCP_CTRL0,
+ MPSCTRL_SECURE_READ_BIT |
+ MPSCTRL_SECURE_WRITE_BIT |
+ MPSCTRL_NON_SECURE_READ_BIT |
+ MPSCTRL_NON_SECURE_WRITE_BIT | MPSCTRL_VALID);
+ }
+}
+
+/*
+ * This function adds the mmc channel to be registered with mmc core.
+ * index - mmc channel number.
+ * regbase - register base address of mmc channel specified in 'index'.
+ * bus_width - operating bus width of mmc channel specified in 'index'.
+ * clksel - value to be written into CLKSEL register in case of FDT.
+ * NULL in case od non-FDT.
+ */
+int exynos_dwmci_add_port(int index, u32 regbase, int bus_width, u32 clksel)
+{
+ struct dwmci_host *host = NULL;
+ unsigned int div;
+ unsigned long freq, sclk;
+ host = malloc(sizeof(struct dwmci_host));
+ if (!host) {
+ printf("dwmci_host malloc fail!\n");
+ return 1;
+ }
+ /* request mmc clock vlaue of 52MHz. */
+ freq = 52000000;
+ sclk = get_mmc_clk(index);
+ div = DIV_ROUND_UP(sclk, freq);
+ /* set the clock divisor for mmc */
+ set_mmc_clk(index, div);
+
+ host->name = "EXYNOS DWMMC";
+ host->ioaddr = (void *)regbase;
+ host->buswidth = bus_width;
+#ifdef CONFIG_EXYNOS5420
+ host->quirks = DWMCI_QUIRK_DISABLE_SMU;
+#endif
+ host->board_init = exynos_dwmci_board_init;
+
+ if (clksel) {
+ host->clksel_val = clksel;
+ } else {
+ if (0 == index)
+ host->clksel_val = DWMMC_MMC0_CLKSEL_VAL;
+ if (2 == index)
+ host->clksel_val = DWMMC_MMC2_CLKSEL_VAL;
+ }
+
+ host->clksel = exynos_dwmci_clksel;
+ host->dev_index = index;
+ host->get_mmc_clk = exynos_dwmci_get_clk;
+ /* Add the mmc channel to be registered with mmc core */
+ if (add_dwmci(host, DWMMC_MAX_FREQ, DWMMC_MIN_FREQ)) {
+ debug("dwmmc%d registration failed\n", index);
+ return -1;
+ }
+ return 0;
+}
+
+#ifdef CONFIG_OF_CONTROL
+int exynos_dwmmc_init(const void *blob)
+{
+ int index, bus_width;
+ int node_list[DWMMC_MAX_CH_NUM];
+ int err = 0, dev_id, flag, count, i;
+ u32 clksel_val, base, timing[3];
+
+ count = fdtdec_find_aliases_for_id(blob, "mmc",
+ COMPAT_SAMSUNG_EXYNOS5_DWMMC, node_list,
+ DWMMC_MAX_CH_NUM);
+
+ for (i = 0; i < count; i++) {
+ int node = node_list[i];
+
+ if (node <= 0)
+ continue;
+
+ /* Extract device id for each mmc channel */
+ dev_id = pinmux_decode_periph_id(blob, node);
+
+ /* Get the bus width from the device node */
+ bus_width = fdtdec_get_int(blob, node, "samsung,bus-width", 0);
+ if (bus_width <= 0) {
+ debug("DWMMC: Can't get bus-width\n");
+ return -1;
+ }
+ if (8 == bus_width)
+ flag = PINMUX_FLAG_8BIT_MODE;
+ else
+ flag = PINMUX_FLAG_NONE;
+
+ /* config pinmux for each mmc channel */
+ err = exynos_pinmux_config(dev_id, flag);
+ if (err) {
+ debug("DWMMC not configured\n");
+ return err;
+ }
+
+ index = dev_id - PERIPH_ID_SDMMC0;
+
+ /* Get the base address from the device node */
+ base = fdtdec_get_addr(blob, node, "reg");
+ if (!base) {
+ debug("DWMMC: Can't get base address\n");
+ return -1;
+ }
+ /* Extract the timing info from the node */
+ err = fdtdec_get_int_array(blob, node, "samsung,timing",
+ timing, 3);
+ if (err) {
+ debug("Can't get sdr-timings for divider\n");
+ return -1;
+ }
+
+ clksel_val = (DWMCI_SET_SAMPLE_CLK(timing[0]) |
+ DWMCI_SET_DRV_CLK(timing[1]) |
+ DWMCI_SET_DIV_RATIO(timing[2]));
+ /* Initialise each mmc channel */
+ err = exynos_dwmci_add_port(index, base, bus_width, clksel_val);
+ if (err)
+ debug("dwmmc Channel-%d init failed\n", index);
+ }
+ return 0;
+}
+#endif
Code Review / kvmfornfv.git / blobdiff