Add qemu 2.4.0
[kvmfornfv.git] / qemu / roms / u-boot / drivers / fpga / ACEX1K.c
diff --git a/qemu/roms/u-boot/drivers/fpga/ACEX1K.c b/qemu/roms/u-boot/drivers/fpga/ACEX1K.c
new file mode 100644 (file)
index 0000000..06b8837
--- /dev/null
@@ -0,0 +1,249 @@
+/*
+ * (C) Copyright 2003
+ * Steven Scholz, imc Measurement & Control, steven.scholz@imc-berlin.de
+ *
+ * (C) Copyright 2002
+ * Rich Ireland, Enterasys Networks, rireland@enterasys.com.
+ *
+ * SPDX-License-Identifier:    GPL-2.0+
+ */
+
+#include <common.h>            /* core U-Boot definitions */
+#include <ACEX1K.h>            /* ACEX device family */
+
+/* Define FPGA_DEBUG to get debug printf's */
+#ifdef FPGA_DEBUG
+#define PRINTF(fmt,args...)    printf (fmt ,##args)
+#else
+#define PRINTF(fmt,args...)
+#endif
+
+/* Note: The assumption is that we cannot possibly run fast enough to
+ * overrun the device (the Slave Parallel mode can free run at 50MHz).
+ * If there is a need to operate slower, define CONFIG_FPGA_DELAY in
+ * the board config file to slow things down.
+ */
+#ifndef CONFIG_FPGA_DELAY
+#define CONFIG_FPGA_DELAY()
+#endif
+
+#ifndef CONFIG_SYS_FPGA_WAIT
+#define CONFIG_SYS_FPGA_WAIT CONFIG_SYS_HZ/10          /* 100 ms */
+#endif
+
+static int ACEX1K_ps_load(Altera_desc *desc, const void *buf, size_t bsize);
+static int ACEX1K_ps_dump(Altera_desc *desc, const void *buf, size_t bsize);
+/* static int ACEX1K_ps_info(Altera_desc *desc); */
+
+/* ------------------------------------------------------------------------- */
+/* ACEX1K Generic Implementation */
+int ACEX1K_load(Altera_desc *desc, const void *buf, size_t bsize)
+{
+       int ret_val = FPGA_FAIL;
+
+       switch (desc->iface) {
+       case passive_serial:
+               PRINTF ("%s: Launching Passive Serial Loader\n", __FUNCTION__);
+               ret_val = ACEX1K_ps_load (desc, buf, bsize);
+               break;
+
+               /* Add new interface types here */
+
+       default:
+               printf ("%s: Unsupported interface type, %d\n",
+                               __FUNCTION__, desc->iface);
+       }
+
+       return ret_val;
+}
+
+int ACEX1K_dump(Altera_desc *desc, const void *buf, size_t bsize)
+{
+       int ret_val = FPGA_FAIL;
+
+       switch (desc->iface) {
+       case passive_serial:
+               PRINTF ("%s: Launching Passive Serial Dump\n", __FUNCTION__);
+               ret_val = ACEX1K_ps_dump (desc, buf, bsize);
+               break;
+
+               /* Add new interface types here */
+
+       default:
+               printf ("%s: Unsupported interface type, %d\n",
+                               __FUNCTION__, desc->iface);
+       }
+
+       return ret_val;
+}
+
+int ACEX1K_info( Altera_desc *desc )
+{
+       return FPGA_SUCCESS;
+}
+
+
+/* ------------------------------------------------------------------------- */
+/* ACEX1K Passive Serial Generic Implementation                                  */
+
+static int ACEX1K_ps_load(Altera_desc *desc, const void *buf, size_t bsize)
+{
+       int ret_val = FPGA_FAIL;        /* assume the worst */
+       Altera_ACEX1K_Passive_Serial_fns *fn = desc->iface_fns;
+       int i;
+
+       PRINTF ("%s: start with interface functions @ 0x%p\n",
+                       __FUNCTION__, fn);
+
+       if (fn) {
+               size_t bytecount = 0;
+               unsigned char *data = (unsigned char *) buf;
+               int cookie = desc->cookie;      /* make a local copy */
+               unsigned long ts;               /* timestamp */
+
+               PRINTF ("%s: Function Table:\n"
+                               "ptr:\t0x%p\n"
+                               "struct: 0x%p\n"
+                               "config:\t0x%p\n"
+                               "status:\t0x%p\n"
+                               "clk:\t0x%p\n"
+                               "data:\t0x%p\n"
+                               "done:\t0x%p\n\n",
+                               __FUNCTION__, &fn, fn, fn->config, fn->status,
+                               fn->clk, fn->data, fn->done);
+#ifdef CONFIG_SYS_FPGA_PROG_FEEDBACK
+               printf ("Loading FPGA Device %d...", cookie);
+#endif
+
+               /*
+                * Run the pre configuration function if there is one.
+                */
+               if (*fn->pre) {
+                       (*fn->pre) (cookie);
+               }
+
+               /* Establish the initial state */
+               (*fn->config) (true, true, cookie);     /* Assert nCONFIG */
+
+               udelay(2);              /* T_cfg > 2us  */
+
+               /* nSTATUS should be asserted now */
+               (*fn->done) (cookie);
+               if ( !(*fn->status) (cookie) ) {
+                       puts ("** nSTATUS is not asserted.\n");
+                       (*fn->abort) (cookie);
+                       return FPGA_FAIL;
+               }
+
+               (*fn->config) (false, true, cookie);    /* Deassert nCONFIG */
+               udelay(2);              /* T_cf2st1 < 4us       */
+
+               /* Wait for nSTATUS to be released (i.e. deasserted) */
+               ts = get_timer (0);             /* get current time */
+               do {
+                       CONFIG_FPGA_DELAY ();
+                       if (get_timer (ts) > CONFIG_SYS_FPGA_WAIT) {    /* check the time */
+                               puts ("** Timeout waiting for STATUS to go high.\n");
+                               (*fn->abort) (cookie);
+                               return FPGA_FAIL;
+                       }
+                       (*fn->done) (cookie);
+               } while ((*fn->status) (cookie));
+
+               /* Get ready for the burn */
+               CONFIG_FPGA_DELAY ();
+
+               /* Load the data */
+               while (bytecount < bsize) {
+                       unsigned char val=0;
+#ifdef CONFIG_SYS_FPGA_CHECK_CTRLC
+                       if (ctrlc ()) {
+                               (*fn->abort) (cookie);
+                               return FPGA_FAIL;
+                       }
+#endif
+                       /* Altera detects an error if INIT goes low (active)
+                          while DONE is low (inactive) */
+#if 0 /* not yet implemented */
+                       if ((*fn->done) (cookie) == 0 && (*fn->init) (cookie)) {
+                               puts ("** CRC error during FPGA load.\n");
+                               (*fn->abort) (cookie);
+                               return (FPGA_FAIL);
+                       }
+#endif
+                       val = data [bytecount ++ ];
+                       i = 8;
+                       do {
+                               /* Deassert the clock */
+                               (*fn->clk) (false, true, cookie);
+                               CONFIG_FPGA_DELAY ();
+                               /* Write data */
+                               (*fn->data) ((val & 0x01), true, cookie);
+                               CONFIG_FPGA_DELAY ();
+                               /* Assert the clock */
+                               (*fn->clk) (true, true, cookie);
+                               CONFIG_FPGA_DELAY ();
+                               val >>= 1;
+                               i --;
+                       } while (i > 0);
+
+#ifdef CONFIG_SYS_FPGA_PROG_FEEDBACK
+                       if (bytecount % (bsize / 40) == 0)
+                               putc ('.');             /* let them know we are alive */
+#endif
+               }
+
+               CONFIG_FPGA_DELAY ();
+
+#ifdef CONFIG_SYS_FPGA_PROG_FEEDBACK
+               putc (' ');                     /* terminate the dotted line */
+#endif
+
+       /*
+        * Checking FPGA's CONF_DONE signal - correctly booted ?
+        */
+
+       if ( ! (*fn->done) (cookie) ) {
+               puts ("** Booting failed! CONF_DONE is still deasserted.\n");
+               (*fn->abort) (cookie);
+               return (FPGA_FAIL);
+       }
+
+       /*
+        * "DCLK must be clocked an additional 10 times fpr ACEX 1K..."
+        */
+
+       for (i = 0; i < 12; i++) {
+               CONFIG_FPGA_DELAY ();
+               (*fn->clk) (true, true, cookie);        /* Assert the clock pin */
+               CONFIG_FPGA_DELAY ();
+               (*fn->clk) (false, true, cookie);       /* Deassert the clock pin */
+       }
+
+       ret_val = FPGA_SUCCESS;
+
+#ifdef CONFIG_SYS_FPGA_PROG_FEEDBACK
+               if (ret_val == FPGA_SUCCESS) {
+                       puts ("Done.\n");
+               }
+               else {
+                       puts ("Fail.\n");
+               }
+#endif
+       (*fn->post) (cookie);
+
+       } else {
+               printf ("%s: NULL Interface function table!\n", __FUNCTION__);
+       }
+
+       return ret_val;
+}
+
+static int ACEX1K_ps_dump(Altera_desc *desc, const void *buf, size_t bsize)
+{
+       /* Readback is only available through the Slave Parallel and         */
+       /* boundary-scan interfaces.                                         */
+       printf ("%s: Passive Serial Dumping is unavailable\n",
+                       __FUNCTION__);
+       return FPGA_FAIL;
+}