Add qemu 2.4.0
[kvmfornfv.git] / qemu / roms / u-boot / drivers / block / sym53c8xx.c
diff --git a/qemu/roms/u-boot/drivers/block/sym53c8xx.c b/qemu/roms/u-boot/drivers/block/sym53c8xx.c
new file mode 100644 (file)
index 0000000..6f1ac85
--- /dev/null
@@ -0,0 +1,852 @@
+/*
+ * (C) Copyright 2001
+ * Denis Peter, MPL AG Switzerland, d.peter@mpl.ch.
+ *
+ * SPDX-License-Identifier:    GPL-2.0+
+ * partly derived from
+ * linux/drivers/scsi/sym53c8xx.c
+ *
+ */
+
+/*
+ * SCSI support based on the chip sym53C810.
+ *
+ * 09-19-2001 Andreas Heppel, Sysgo RTS GmbH <aheppel@sysgo.de>
+ *             The local version of this driver for the BAB750 board does not
+ *             use interrupts but polls the chip instead (see the call of
+ *             'handle_scsi_int()' in 'scsi_issue()'.
+ */
+
+#include <common.h>
+
+#include <command.h>
+#include <pci.h>
+#include <asm/processor.h>
+#include <sym53c8xx.h>
+#include <scsi.h>
+
+#undef SYM53C8XX_DEBUG
+
+#ifdef SYM53C8XX_DEBUG
+#define        PRINTF(fmt,args...)     printf (fmt ,##args)
+#else
+#define PRINTF(fmt,args...)
+#endif
+
+#if defined(CONFIG_CMD_SCSI) && defined(CONFIG_SCSI_SYM53C8XX)
+
+#undef SCSI_SINGLE_STEP
+/*
+ * Single Step is only used for debug purposes
+ */
+#ifdef SCSI_SINGLE_STEP
+static unsigned long start_script_select;
+static unsigned long start_script_msgout;
+static unsigned long start_script_msgin;
+static unsigned long start_script_msg_ext;
+static unsigned long start_script_cmd;
+static unsigned long start_script_data_in;
+static unsigned long start_script_data_out;
+static unsigned long start_script_status;
+static unsigned long start_script_complete;
+static unsigned long start_script_error;
+static unsigned long start_script_reselection;
+static unsigned int len_script_select;
+static unsigned int len_script_msgout;
+static unsigned int len_script_msgin;
+static unsigned int len_script_msg_ext;
+static unsigned int len_script_cmd;
+static unsigned int len_script_data_in;
+static unsigned int len_script_data_out;
+static unsigned int len_script_status;
+static unsigned int len_script_complete;
+static unsigned int len_script_error;
+static unsigned int len_script_reselection;
+#endif
+
+
+static unsigned short scsi_int_mask;   /* shadow register for SCSI related interrupts */
+static unsigned char  script_int_mask; /* shadow register for SCRIPT related interrupts */
+static unsigned long script_select[8]; /* script for selection */
+static unsigned long script_msgout[8]; /* script for message out phase (NOT USED) */
+static unsigned long script_msgin[14]; /* script for message in phase */
+static unsigned long script_msg_ext[32]; /* script for message in phase when more than 1 byte message */
+static unsigned long script_cmd[18];    /* script for command phase */
+static unsigned long script_data_in[8]; /* script for data in phase */
+static unsigned long script_data_out[8]; /* script for data out phase */
+static unsigned long script_status[6]; /* script for status phase */
+static unsigned long script_complete[10]; /* script for complete */
+static unsigned long script_reselection[4]; /* script for reselection (NOT USED) */
+static unsigned long script_error[2]; /* script for error handling */
+
+static unsigned long int_stat[3]; /* interrupt status */
+static unsigned long scsi_mem_addr; /* base memory address =SCSI_MEM_ADDRESS; */
+
+#define bus_to_phys(a) pci_mem_to_phys(busdevfunc, (unsigned long) (a))
+#define phys_to_bus(a) pci_phys_to_mem(busdevfunc, (unsigned long) (a))
+
+#define SCSI_MAX_RETRY 3 /* number of retries in scsi_issue() */
+
+#define SCSI_MAX_RETRY_NOT_READY 10 /* number of retries when device is not ready */
+#define SCSI_NOT_READY_TIME_OUT 500 /* timeout per retry when not ready */
+
+/*********************************************************************************
+ * forward declerations
+ */
+
+void scsi_chip_init(void);
+void handle_scsi_int(void);
+
+
+/********************************************************************************
+ * reports SCSI errors to the user
+ */
+void scsi_print_error (ccb * pccb)
+{
+       int i;
+
+       printf ("SCSI Error: Target %d LUN %d Command %02X\n", pccb->target,
+               pccb->lun, pccb->cmd[0]);
+       printf ("       CCB: ");
+       for (i = 0; i < pccb->cmdlen; i++)
+               printf ("%02X ", pccb->cmd[i]);
+       printf ("(len=%d)\n", pccb->cmdlen);
+       printf ("     Cntrl: ");
+       switch (pccb->contr_stat) {
+       case SIR_COMPLETE:
+               printf ("Complete (no Error)\n");
+               break;
+       case SIR_SEL_ATN_NO_MSG_OUT:
+               printf ("Selected with ATN no MSG out phase\n");
+               break;
+       case SIR_CMD_OUT_ILL_PH:
+               printf ("Command out illegal phase\n");
+               break;
+       case SIR_MSG_RECEIVED:
+               printf ("MSG received Error\n");
+               break;
+       case SIR_DATA_IN_ERR:
+               printf ("Data in Error\n");
+               break;
+       case SIR_DATA_OUT_ERR:
+               printf ("Data out Error\n");
+               break;
+       case SIR_SCRIPT_ERROR:
+               printf ("Script Error\n");
+               break;
+       case SIR_MSG_OUT_NO_CMD:
+               printf ("MSG out no Command phase\n");
+               break;
+       case SIR_MSG_OVER7:
+               printf ("MSG in over 7 bytes\n");
+               break;
+       case INT_ON_FY:
+               printf ("Interrupt on fly\n");
+               break;
+       case SCSI_SEL_TIME_OUT:
+               printf ("SCSI Selection Timeout\n");
+               break;
+       case SCSI_HNS_TIME_OUT:
+               printf ("SCSI Handshake Timeout\n");
+               break;
+       case SCSI_MA_TIME_OUT:
+               printf ("SCSI Phase Error\n");
+               break;
+       case SCSI_UNEXP_DIS:
+               printf ("SCSI unexpected disconnect\n");
+               break;
+       default:
+               printf ("unknown status %lx\n", pccb->contr_stat);
+               break;
+       }
+       printf ("     Sense: SK %x (", pccb->sense_buf[2] & 0x0f);
+       switch (pccb->sense_buf[2] & 0xf) {
+       case SENSE_NO_SENSE:
+               printf ("No Sense)");
+               break;
+       case SENSE_RECOVERED_ERROR:
+               printf ("Recovered Error)");
+               break;
+       case SENSE_NOT_READY:
+               printf ("Not Ready)");
+               break;
+       case SENSE_MEDIUM_ERROR:
+               printf ("Medium Error)");
+               break;
+       case SENSE_HARDWARE_ERROR:
+               printf ("Hardware Error)");
+               break;
+       case SENSE_ILLEGAL_REQUEST:
+               printf ("Illegal request)");
+               break;
+       case SENSE_UNIT_ATTENTION:
+               printf ("Unit Attention)");
+               break;
+       case SENSE_DATA_PROTECT:
+               printf ("Data Protect)");
+               break;
+       case SENSE_BLANK_CHECK:
+               printf ("Blank check)");
+               break;
+       case SENSE_VENDOR_SPECIFIC:
+               printf ("Vendor specific)");
+               break;
+       case SENSE_COPY_ABORTED:
+               printf ("Copy aborted)");
+               break;
+       case SENSE_ABORTED_COMMAND:
+               printf ("Aborted Command)");
+               break;
+       case SENSE_VOLUME_OVERFLOW:
+               printf ("Volume overflow)");
+               break;
+       case SENSE_MISCOMPARE:
+               printf ("Misscompare\n");
+               break;
+       default:
+               printf ("Illegal Sensecode\n");
+               break;
+       }
+       printf (" ASC %x ASCQ %x\n", pccb->sense_buf[12],
+               pccb->sense_buf[13]);
+       printf ("    Status: ");
+       switch (pccb->status) {
+       case S_GOOD:
+               printf ("Good\n");
+               break;
+       case S_CHECK_COND:
+               printf ("Check condition\n");
+               break;
+       case S_COND_MET:
+               printf ("Condition Met\n");
+               break;
+       case S_BUSY:
+               printf ("Busy\n");
+               break;
+       case S_INT:
+               printf ("Intermediate\n");
+               break;
+       case S_INT_COND_MET:
+               printf ("Intermediate condition met\n");
+               break;
+       case S_CONFLICT:
+               printf ("Reservation conflict\n");
+               break;
+       case S_TERMINATED:
+               printf ("Command terminated\n");
+               break;
+       case S_QUEUE_FULL:
+               printf ("Task set full\n");
+               break;
+       default:
+               printf ("unknown: %02X\n", pccb->status);
+               break;
+       }
+
+}
+
+
+/******************************************************************************
+ * sets-up the SCSI controller
+ * the base memory address is retrieved via the pci_read_config_dword
+ */
+void scsi_low_level_init(int busdevfunc)
+{
+       unsigned int cmd;
+       unsigned int addr;
+       unsigned char vec;
+
+       pci_read_config_byte(busdevfunc, PCI_INTERRUPT_LINE, &vec);
+       pci_read_config_dword(busdevfunc, PCI_BASE_ADDRESS_1, &addr);
+
+       addr = bus_to_phys(addr & ~0xf);
+
+       /*
+        * Enable bus mastering in case this has not been done, yet.
+        */
+       pci_read_config_dword(busdevfunc, PCI_COMMAND, &cmd);
+       cmd |= PCI_COMMAND_MASTER;
+       pci_write_config_dword(busdevfunc, PCI_COMMAND, cmd);
+
+       scsi_mem_addr = addr;
+
+       scsi_chip_init();
+       scsi_bus_reset();
+}
+
+
+/************************************************************************************
+ * Low level Part of SCSI Driver
+ */
+
+/*
+ * big-endian -> little endian conversion for the script
+ */
+unsigned long swap_script(unsigned long val)
+{
+       unsigned long tmp;
+       tmp = ((val>>24)&0xff) | ((val>>8)&0xff00) | ((val<<8)&0xff0000) | ((val<<24)&0xff000000);
+       return tmp;
+}
+
+
+void scsi_write_byte(ulong offset,unsigned char val)
+{
+       out8(scsi_mem_addr+offset,val);
+}
+
+
+unsigned char scsi_read_byte(ulong offset)
+{
+       return(in8(scsi_mem_addr+offset));
+}
+
+
+/********************************************************************************
+ * interrupt handler
+ */
+void handle_scsi_int(void)
+{
+       unsigned char stat,stat1,stat2;
+       unsigned short sstat;
+       int i;
+#ifdef SCSI_SINGLE_STEP
+       unsigned long tt;
+#endif
+       stat=scsi_read_byte(ISTAT);
+       if((stat & DIP)==DIP) { /* DMA Interrupt pending */
+               stat1=scsi_read_byte(DSTAT);
+#ifdef SCSI_SINGLE_STEP
+               if((stat1 & SSI)==SSI) {
+                       tt=in32r(scsi_mem_addr+DSP);
+                       if(((tt)>=start_script_select) && ((tt)<start_script_select+len_script_select)) {
+                               printf("select %d\n",(tt-start_script_select)>>2);
+                               goto end_single;
+                       }
+                       if(((tt)>=start_script_msgout) && ((tt)<start_script_msgout+len_script_msgout)) {
+                               printf("msgout %d\n",(tt-start_script_msgout)>>2);
+                               goto end_single;
+                       }
+                       if(((tt)>=start_script_msgin) && ((tt)<start_script_msgin+len_script_msgin)) {
+                               printf("msgin %d\n",(tt-start_script_msgin)>>2);
+                               goto end_single;
+                       }
+                       if(((tt)>=start_script_msg_ext) && ((tt)<start_script_msg_ext+len_script_msg_ext)) {
+                               printf("msgin_ext %d\n",(tt-start_script_msg_ext)>>2);
+                               goto end_single;
+                       }
+                       if(((tt)>=start_script_cmd) && ((tt)<start_script_cmd+len_script_cmd)) {
+                               printf("cmd %d\n",(tt-start_script_cmd)>>2);
+                               goto end_single;
+                       }
+                       if(((tt)>=start_script_data_in) && ((tt)<start_script_data_in+len_script_data_in)) {
+                               printf("data_in %d\n",(tt-start_script_data_in)>>2);
+                               goto end_single;
+                       }
+                       if(((tt)>=start_script_data_out) && ((tt)<start_script_data_out+len_script_data_out)) {
+                               printf("data_out %d\n",(tt-start_script_data_out)>>2);
+                               goto end_single;
+                       }
+                       if(((tt)>=start_script_status) && ((tt)<start_script_status+len_script_status)) {
+                               printf("status %d\n",(tt-start_script_status)>>2);
+                               goto end_single;
+                       }
+                       if(((tt)>=start_script_complete) && ((tt)<start_script_complete+len_script_complete)) {
+                               printf("complete %d\n",(tt-start_script_complete)>>2);
+                               goto end_single;
+                       }
+                       if(((tt)>=start_script_error) && ((tt)<start_script_error+len_script_error)) {
+                               printf("error %d\n",(tt-start_script_error)>>2);
+                               goto end_single;
+                       }
+                       if(((tt)>=start_script_reselection) && ((tt)<start_script_reselection+len_script_reselection)) {
+                               printf("reselection %d\n",(tt-start_script_reselection)>>2);
+                               goto end_single;
+                       }
+                       printf("sc: %lx\n",tt);
+end_single:
+                       stat2=scsi_read_byte(DCNTL);
+                       stat2|=STD;
+                       scsi_write_byte(DCNTL,stat2);
+               }
+#endif
+               if((stat1 & SIR)==SIR) /* script interrupt */
+               {
+                       int_stat[0]=in32(scsi_mem_addr+DSPS);
+               }
+               if((stat1 & DFE)==0) { /* fifo not epmty */
+                       scsi_write_byte(CTEST3,CLF); /* Clear DMA FIFO */
+                       stat2=scsi_read_byte(STEST3);
+                       scsi_write_byte(STEST3,(stat2 | CSF)); /* Clear SCSI FIFO */
+               }
+       }
+       if((stat & SIP)==SIP) {  /* scsi interrupt */
+               sstat = (unsigned short)scsi_read_byte(SIST+1);
+               sstat <<=8;
+               sstat |= (unsigned short)scsi_read_byte(SIST);
+               for(i=0;i<3;i++) {
+                       if(int_stat[i]==0)
+                               break; /* found an empty int status */
+               }
+               int_stat[i]=SCSI_INT_STATE | sstat;
+               stat1=scsi_read_byte(DSTAT);
+               if((stat1 & DFE)==0) { /* fifo not epmty */
+                       scsi_write_byte(CTEST3,CLF); /* Clear DMA FIFO */
+                       stat2=scsi_read_byte(STEST3);
+                       scsi_write_byte(STEST3,(stat2 | CSF)); /* Clear SCSI FIFO */
+               }
+       }
+       if((stat & INTF)==INTF) { /* interrupt on Fly */
+               scsi_write_byte(ISTAT,stat); /* clear it */
+               for(i=0;i<3;i++) {
+                       if(int_stat[i]==0)
+                               break; /* found an empty int status */
+               }
+               int_stat[i]=INT_ON_FY;
+       }
+}
+
+void scsi_bus_reset(void)
+{
+       unsigned char t;
+       int i;
+       int end = CONFIG_SYS_SCSI_SPIN_UP_TIME*1000;
+
+       t=scsi_read_byte(SCNTL1);
+       scsi_write_byte(SCNTL1,(t | CRST));
+       udelay(50);
+       scsi_write_byte(SCNTL1,t);
+
+       puts("waiting for devices to spin up");
+       for(i=0;i<end;i++) {
+               udelay(1000); /* give the devices time to spin up */
+               if (i % 1000 == 0)
+                       putc('.');
+       }
+       putc('\n');
+       scsi_chip_init(); /* reinit the chip ...*/
+
+}
+
+void scsi_int_enable(void)
+{
+       scsi_write_byte(SIEN,(unsigned char)scsi_int_mask);
+       scsi_write_byte(SIEN+1,(unsigned char)(scsi_int_mask>>8));
+       scsi_write_byte(DIEN,script_int_mask);
+}
+
+void scsi_write_dsp(unsigned long start)
+{
+#ifdef SCSI_SINGLE_STEP
+       unsigned char t;
+#endif
+       out32r(scsi_mem_addr + DSP,start);
+#ifdef SCSI_SINGLE_STEP
+       t=scsi_read_byte(DCNTL);
+  t|=STD;
+       scsi_write_byte(DCNTL,t);
+#endif
+}
+
+/* only used for debug purposes */
+void scsi_print_script(void)
+{
+       printf("script_select @         0x%08lX\n",(unsigned long)&script_select[0]);
+       printf("script_msgout @         0x%08lX\n",(unsigned long)&script_msgout[0]);
+       printf("script_msgin @          0x%08lX\n",(unsigned long)&script_msgin[0]);
+       printf("script_msgext @         0x%08lX\n",(unsigned long)&script_msg_ext[0]);
+       printf("script_cmd @            0x%08lX\n",(unsigned long)&script_cmd[0]);
+       printf("script_data_in @        0x%08lX\n",(unsigned long)&script_data_in[0]);
+       printf("script_data_out @       0x%08lX\n",(unsigned long)&script_data_out[0]);
+       printf("script_status @         0x%08lX\n",(unsigned long)&script_status[0]);
+       printf("script_complete @       0x%08lX\n",(unsigned long)&script_complete[0]);
+       printf("script_error @          0x%08lX\n",(unsigned long)&script_error[0]);
+}
+
+
+void scsi_set_script(ccb *pccb)
+{
+       int busdevfunc = pccb->priv;
+       int i;
+       i=0;
+       script_select[i++]=swap_script(SCR_REG_REG(GPREG, SCR_AND, 0xfe));
+       script_select[i++]=0; /* LED ON */
+       script_select[i++]=swap_script(SCR_CLR(SCR_TRG)); /* select initiator mode */
+       script_select[i++]=0;
+       /* script_select[i++]=swap_script(SCR_SEL_ABS_ATN | pccb->target << 16); */
+       script_select[i++]=swap_script(SCR_SEL_ABS | pccb->target << 16);
+       script_select[i++]=swap_script(phys_to_bus(&script_cmd[4])); /* error handling */
+       script_select[i++]=swap_script(SCR_JUMP); /* next section */
+       /*      script_select[i++]=swap_script((unsigned long)&script_msgout[0]); */ /* message out */
+       script_select[i++]=swap_script(phys_to_bus(&script_cmd[0])); /* command out */
+
+#ifdef SCSI_SINGLE_STEP
+       start_script_select=(unsigned long)&script_select[0];
+       len_script_select=i*4;
+#endif
+
+       i=0;
+       script_msgout[i++]=swap_script(SCR_INT ^ IFFALSE (WHEN (SCR_MSG_OUT)));
+       script_msgout[i++]=SIR_SEL_ATN_NO_MSG_OUT;
+       script_msgout[i++]=swap_script( SCR_MOVE_ABS(1) ^ SCR_MSG_OUT);
+       script_msgout[i++]=swap_script(phys_to_bus(&pccb->msgout[0]));
+       script_msgout[i++]=swap_script(SCR_JUMP ^ IFTRUE (WHEN (SCR_COMMAND))); /* if Command phase */
+       script_msgout[i++]=swap_script(phys_to_bus(&script_cmd[0])); /* switch to command */
+       script_msgout[i++]=swap_script(SCR_INT); /* interrupt if not */
+       script_msgout[i++]=SIR_MSG_OUT_NO_CMD;
+
+#ifdef SCSI_SINGLE_STEP
+       start_script_msgout=(unsigned long)&script_msgout[0];
+       len_script_msgout=i*4;
+#endif
+       i=0;
+       script_cmd[i++]=swap_script(SCR_MOVE_ABS(pccb->cmdlen) ^ SCR_COMMAND);
+       script_cmd[i++]=swap_script(phys_to_bus(&pccb->cmd[0]));
+       script_cmd[i++]=swap_script(SCR_JUMP ^ IFTRUE (WHEN (SCR_MSG_IN))); /* message in ? */
+       script_cmd[i++]=swap_script(phys_to_bus(&script_msgin[0]));
+       script_cmd[i++]=swap_script(SCR_JUMP ^ IFTRUE (IF (SCR_DATA_OUT))); /* data out ? */
+       script_cmd[i++]=swap_script(phys_to_bus(&script_data_out[0]));
+       script_cmd[i++]=swap_script(SCR_JUMP ^ IFTRUE (IF (SCR_DATA_IN))); /* data in ? */
+       script_cmd[i++]=swap_script(phys_to_bus(&script_data_in[0]));
+       script_cmd[i++]=swap_script(SCR_JUMP ^ IFTRUE (IF (SCR_STATUS)));  /* status ? */
+       script_cmd[i++]=swap_script(phys_to_bus(&script_status[0]));
+       script_cmd[i++]=swap_script(SCR_JUMP ^ IFTRUE (IF (SCR_COMMAND)));  /* command ? */
+       script_cmd[i++]=swap_script(phys_to_bus(&script_cmd[0]));
+       script_cmd[i++]=swap_script(SCR_JUMP ^ IFTRUE (IF (SCR_MSG_OUT)));  /* message out ? */
+       script_cmd[i++]=swap_script(phys_to_bus(&script_msgout[0]));
+       script_cmd[i++]=swap_script(SCR_JUMP ^ IFTRUE (IF (SCR_MSG_IN))); /* just for error handling message in ? */
+       script_cmd[i++]=swap_script(phys_to_bus(&script_msgin[0]));
+       script_cmd[i++]=swap_script(SCR_INT); /* interrupt if not */
+       script_cmd[i++]=SIR_CMD_OUT_ILL_PH;
+#ifdef SCSI_SINGLE_STEP
+       start_script_cmd=(unsigned long)&script_cmd[0];
+       len_script_cmd=i*4;
+#endif
+       i=0;
+       script_data_out[i++]=swap_script(SCR_MOVE_ABS(pccb->datalen)^ SCR_DATA_OUT); /* move */
+       script_data_out[i++]=swap_script(phys_to_bus(pccb->pdata)); /* pointer to buffer */
+       script_data_out[i++]=swap_script(SCR_JUMP ^ IFTRUE (WHEN (SCR_STATUS)));
+       script_data_out[i++]=swap_script(phys_to_bus(&script_status[0]));
+       script_data_out[i++]=swap_script(SCR_INT);
+       script_data_out[i++]=SIR_DATA_OUT_ERR;
+
+#ifdef SCSI_SINGLE_STEP
+       start_script_data_out=(unsigned long)&script_data_out[0];
+       len_script_data_out=i*4;
+#endif
+       i=0;
+       script_data_in[i++]=swap_script(SCR_MOVE_ABS(pccb->datalen)^ SCR_DATA_IN); /* move  */
+       script_data_in[i++]=swap_script(phys_to_bus(pccb->pdata)); /* pointer to buffer */
+       script_data_in[i++]=swap_script(SCR_JUMP ^ IFTRUE (WHEN (SCR_STATUS)));
+       script_data_in[i++]=swap_script(phys_to_bus(&script_status[0]));
+       script_data_in[i++]=swap_script(SCR_INT);
+       script_data_in[i++]=SIR_DATA_IN_ERR;
+#ifdef SCSI_SINGLE_STEP
+       start_script_data_in=(unsigned long)&script_data_in[0];
+       len_script_data_in=i*4;
+#endif
+       i=0;
+       script_msgin[i++]=swap_script(SCR_MOVE_ABS (1) ^ SCR_MSG_IN);
+       script_msgin[i++]=swap_script(phys_to_bus(&pccb->msgin[0]));
+       script_msgin[i++]=swap_script(SCR_JUMP ^ IFTRUE (DATA (M_COMPLETE)));
+       script_msgin[i++]=swap_script(phys_to_bus(&script_complete[0]));
+       script_msgin[i++]=swap_script(SCR_JUMP ^ IFTRUE (DATA (M_DISCONNECT)));
+       script_msgin[i++]=swap_script(phys_to_bus(&script_complete[0]));
+       script_msgin[i++]=swap_script(SCR_JUMP ^ IFTRUE (DATA (M_SAVE_DP)));
+       script_msgin[i++]=swap_script(phys_to_bus(&script_complete[0]));
+       script_msgin[i++]=swap_script(SCR_JUMP ^ IFTRUE (DATA (M_RESTORE_DP)));
+       script_msgin[i++]=swap_script(phys_to_bus(&script_complete[0]));
+       script_msgin[i++]=swap_script(SCR_JUMP ^ IFTRUE (DATA (M_EXTENDED)));
+       script_msgin[i++]=swap_script(phys_to_bus(&script_msg_ext[0]));
+       script_msgin[i++]=swap_script(SCR_INT);
+       script_msgin[i++]=SIR_MSG_RECEIVED;
+#ifdef SCSI_SINGLE_STEP
+       start_script_msgin=(unsigned long)&script_msgin[0];
+       len_script_msgin=i*4;
+#endif
+       i=0;
+       script_msg_ext[i++]=swap_script(SCR_CLR (SCR_ACK)); /* clear ACK */
+       script_msg_ext[i++]=0;
+       script_msg_ext[i++]=swap_script(SCR_MOVE_ABS (1) ^ SCR_MSG_IN); /* assuming this is the msg length */
+       script_msg_ext[i++]=swap_script(phys_to_bus(&pccb->msgin[1]));
+       script_msg_ext[i++]=swap_script(SCR_JUMP ^ IFFALSE (IF (SCR_MSG_IN)));
+       script_msg_ext[i++]=swap_script(phys_to_bus(&script_complete[0])); /* no more bytes */
+       script_msg_ext[i++]=swap_script(SCR_MOVE_ABS (1) ^ SCR_MSG_IN); /* next */
+       script_msg_ext[i++]=swap_script(phys_to_bus(&pccb->msgin[2]));
+       script_msg_ext[i++]=swap_script(SCR_JUMP ^ IFFALSE (IF (SCR_MSG_IN)));
+       script_msg_ext[i++]=swap_script(phys_to_bus(&script_complete[0])); /* no more bytes */
+       script_msg_ext[i++]=swap_script(SCR_MOVE_ABS (1) ^ SCR_MSG_IN); /* next */
+       script_msg_ext[i++]=swap_script(phys_to_bus(&pccb->msgin[3]));
+       script_msg_ext[i++]=swap_script(SCR_JUMP ^ IFFALSE (IF (SCR_MSG_IN)));
+       script_msg_ext[i++]=swap_script(phys_to_bus(&script_complete[0])); /* no more bytes */
+       script_msg_ext[i++]=swap_script(SCR_MOVE_ABS (1) ^ SCR_MSG_IN); /* next */
+       script_msg_ext[i++]=swap_script(phys_to_bus(&pccb->msgin[4]));
+       script_msg_ext[i++]=swap_script(SCR_JUMP ^ IFFALSE (IF (SCR_MSG_IN)));
+       script_msg_ext[i++]=swap_script(phys_to_bus(&script_complete[0])); /* no more bytes */
+       script_msg_ext[i++]=swap_script(SCR_MOVE_ABS (1) ^ SCR_MSG_IN); /* next */
+       script_msg_ext[i++]=swap_script(phys_to_bus(&pccb->msgin[5]));
+       script_msg_ext[i++]=swap_script(SCR_JUMP ^ IFFALSE (IF (SCR_MSG_IN)));
+       script_msg_ext[i++]=swap_script(phys_to_bus(&script_complete[0])); /* no more bytes */
+       script_msg_ext[i++]=swap_script(SCR_MOVE_ABS (1) ^ SCR_MSG_IN); /* next */
+       script_msg_ext[i++]=swap_script(phys_to_bus(&pccb->msgin[6]));
+       script_msg_ext[i++]=swap_script(SCR_JUMP ^ IFFALSE (IF (SCR_MSG_IN)));
+       script_msg_ext[i++]=swap_script(phys_to_bus(&script_complete[0])); /* no more bytes */
+       script_msg_ext[i++]=swap_script(SCR_MOVE_ABS (1) ^ SCR_MSG_IN); /* next */
+       script_msg_ext[i++]=swap_script(phys_to_bus(&pccb->msgin[7]));
+       script_msg_ext[i++]=swap_script(SCR_JUMP ^ IFFALSE (IF (SCR_MSG_IN)));
+       script_msg_ext[i++]=swap_script(phys_to_bus(&script_complete[0])); /* no more bytes */
+       script_msg_ext[i++]=swap_script(SCR_INT);
+       script_msg_ext[i++]=SIR_MSG_OVER7;
+#ifdef SCSI_SINGLE_STEP
+       start_script_msg_ext=(unsigned long)&script_msg_ext[0];
+       len_script_msg_ext=i*4;
+#endif
+       i=0;
+       script_status[i++]=swap_script(SCR_MOVE_ABS (1) ^ SCR_STATUS);
+       script_status[i++]=swap_script(phys_to_bus(&pccb->status));
+       script_status[i++]=swap_script(SCR_JUMP ^ IFTRUE (WHEN (SCR_MSG_IN)));
+       script_status[i++]=swap_script(phys_to_bus(&script_msgin[0]));
+       script_status[i++]=swap_script(SCR_INT);
+       script_status[i++]=SIR_STATUS_ILL_PH;
+#ifdef SCSI_SINGLE_STEP
+       start_script_status=(unsigned long)&script_status[0];
+       len_script_status=i*4;
+#endif
+       i=0;
+       script_complete[i++]=swap_script(SCR_REG_REG (SCNTL2, SCR_AND, 0x7f));
+       script_complete[i++]=0;
+       script_complete[i++]=swap_script(SCR_CLR (SCR_ACK|SCR_ATN));
+       script_complete[i++]=0;
+       script_complete[i++]=swap_script(SCR_WAIT_DISC);
+       script_complete[i++]=0;
+       script_complete[i++]=swap_script(SCR_REG_REG(GPREG, SCR_OR, 0x01));
+       script_complete[i++]=0; /* LED OFF */
+       script_complete[i++]=swap_script(SCR_INT);
+       script_complete[i++]=SIR_COMPLETE;
+#ifdef SCSI_SINGLE_STEP
+       start_script_complete=(unsigned long)&script_complete[0];
+       len_script_complete=i*4;
+#endif
+       i=0;
+       script_error[i++]=swap_script(SCR_INT); /* interrupt if error */
+       script_error[i++]=SIR_SCRIPT_ERROR;
+#ifdef SCSI_SINGLE_STEP
+       start_script_error=(unsigned long)&script_error[0];
+       len_script_error=i*4;
+#endif
+       i=0;
+       script_reselection[i++]=swap_script(SCR_CLR (SCR_TRG)); /* target status */
+       script_reselection[i++]=0;
+       script_reselection[i++]=swap_script(SCR_WAIT_RESEL);
+       script_reselection[i++]=swap_script(phys_to_bus(&script_select[0])); /* len = 4 */
+#ifdef SCSI_SINGLE_STEP
+       start_script_reselection=(unsigned long)&script_reselection[0];
+       len_script_reselection=i*4;
+#endif
+}
+
+
+void scsi_issue(ccb *pccb)
+{
+       int busdevfunc = pccb->priv;
+       int i;
+       unsigned short sstat;
+       int retrycnt;  /* retry counter */
+       for(i=0;i<3;i++)
+               int_stat[i]=0; /* delete all int status */
+       /* struct pccb must be set-up correctly */
+       retrycnt=0;
+       PRINTF("ID %d issue cmd %02X\n",pccb->target,pccb->cmd[0]);
+       pccb->trans_bytes=0; /* no bytes transfered yet */
+       scsi_set_script(pccb); /* fill in SCRIPT                */
+       scsi_int_mask=STO | UDC | MA; /* | CMP; / * Interrupts which are enabled */
+       script_int_mask=0xff; /* enable all Ints */
+       scsi_int_enable();
+       scsi_write_dsp(phys_to_bus(&script_select[0])); /* start script */
+       /* now we have to wait for IRQs */
+retry:
+       /*
+        * This version of the driver is _not_ interrupt driven,
+        * but polls the chip's interrupt registers (ISTAT, DSTAT).
+        */
+       while(int_stat[0]==0)
+               handle_scsi_int();
+
+       if(int_stat[0]==SIR_COMPLETE) {
+               if(pccb->msgin[0]==M_DISCONNECT) {
+                       PRINTF("Wait for reselection\n");
+                       for(i=0;i<3;i++)
+                               int_stat[i]=0; /* delete all int status */
+                       scsi_write_dsp(phys_to_bus(&script_reselection[0])); /* start reselection script */
+                       goto retry;
+               }
+               pccb->contr_stat=SIR_COMPLETE;
+               return;
+       }
+       if((int_stat[0] & SCSI_INT_STATE)==SCSI_INT_STATE) { /* scsi interrupt */
+               sstat=(unsigned short)int_stat[0];
+               if((sstat & STO)==STO) { /* selection timeout */
+                       pccb->contr_stat=SCSI_SEL_TIME_OUT;
+                       scsi_write_byte(GPREG,0x01);
+                       PRINTF("ID: %X Selection Timeout\n",pccb->target);
+                       return;
+               }
+               if((sstat & UDC)==UDC) { /* unexpected disconnect */
+                       pccb->contr_stat=SCSI_UNEXP_DIS;
+                       scsi_write_byte(GPREG,0x01);
+                       PRINTF("ID: %X Unexpected Disconnect\n",pccb->target);
+                       return;
+               }
+               if((sstat & RSL)==RSL) { /* reselection */
+                       pccb->contr_stat=SCSI_UNEXP_DIS;
+                       scsi_write_byte(GPREG,0x01);
+                       PRINTF("ID: %X Unexpected Disconnect\n",pccb->target);
+                       return;
+               }
+               if(((sstat & MA)==MA)||((sstat & HTH)==HTH)) { /* phase missmatch */
+                       if(retrycnt<SCSI_MAX_RETRY) {
+                               pccb->trans_bytes=pccb->datalen -
+                                       ((unsigned long)scsi_read_byte(DBC) |
+                                       ((unsigned long)scsi_read_byte(DBC+1)<<8) |
+                                       ((unsigned long)scsi_read_byte(DBC+2)<<16));
+                               for(i=0;i<3;i++)
+                                       int_stat[i]=0; /* delete all int status */
+                               retrycnt++;
+                               PRINTF("ID: %X Phase Missmatch Retry %d Phase %02X transfered %lx\n",
+                                               pccb->target,retrycnt,scsi_read_byte(SBCL),pccb->trans_bytes);
+                               scsi_write_dsp(phys_to_bus(&script_cmd[4])); /* start retry script */
+                               goto retry;
+                       }
+                       if((sstat & MA)==MA)
+                               pccb->contr_stat=SCSI_MA_TIME_OUT;
+                       else
+                               pccb->contr_stat=SCSI_HNS_TIME_OUT;
+                       PRINTF("Phase Missmatch stat %lx\n",pccb->contr_stat);
+                       return;
+               } /* no phase int */
+/*             if((sstat & CMP)==CMP) {
+                       pccb->contr_stat=SIR_COMPLETE;
+                       return;
+               }
+*/
+               PRINTF("SCSI INT %lX\n",int_stat[0]);
+               pccb->contr_stat=int_stat[0];
+               return;
+       } /* end scsi int */
+       PRINTF("SCRIPT INT %lX phase %02X\n",int_stat[0],scsi_read_byte(SBCL));
+       pccb->contr_stat=int_stat[0];
+       return;
+}
+
+int scsi_exec(ccb *pccb)
+{
+       unsigned char tmpcmd[16],tmpstat;
+       int i,retrycnt,t;
+       unsigned long transbytes,datalen;
+       unsigned char *tmpptr;
+       retrycnt=0;
+retry:
+       scsi_issue(pccb);
+       if(pccb->contr_stat!=SIR_COMPLETE)
+               return false;
+       if(pccb->status==S_GOOD)
+               return true;
+       if(pccb->status==S_CHECK_COND) { /* check condition */
+               for(i=0;i<16;i++)
+                       tmpcmd[i]=pccb->cmd[i];
+               pccb->cmd[0]=SCSI_REQ_SENSE;
+               pccb->cmd[1]=pccb->lun<<5;
+               pccb->cmd[2]=0;
+               pccb->cmd[3]=0;
+               pccb->cmd[4]=14;
+               pccb->cmd[5]=0;
+               pccb->cmdlen=6;
+               pccb->msgout[0]=SCSI_IDENTIFY;
+               transbytes=pccb->trans_bytes;
+               tmpptr=pccb->pdata;
+               pccb->pdata = &pccb->sense_buf[0];
+               datalen=pccb->datalen;
+               pccb->datalen=14;
+               tmpstat=pccb->status;
+               scsi_issue(pccb);
+               for(i=0;i<16;i++)
+                       pccb->cmd[i]=tmpcmd[i];
+               pccb->trans_bytes=transbytes;
+               pccb->pdata=tmpptr;
+               pccb->datalen=datalen;
+               pccb->status=tmpstat;
+               PRINTF("Request_sense sense key %x ASC %x ASCQ %x\n",pccb->sense_buf[2]&0x0f,
+                       pccb->sense_buf[12],pccb->sense_buf[13]);
+               switch(pccb->sense_buf[2]&0xf) {
+                       case SENSE_NO_SENSE:
+                       case SENSE_RECOVERED_ERROR:
+                               /* seems to be ok */
+                               return true;
+                               break;
+                       case SENSE_NOT_READY:
+                               if((pccb->sense_buf[12]!=0x04)||(pccb->sense_buf[13]!=0x01)) {
+                                       /* if device is not in process of becoming ready */
+                                       return false;
+                                       break;
+                               } /* else fall through */
+                       case SENSE_UNIT_ATTENTION:
+                               if(retrycnt<SCSI_MAX_RETRY_NOT_READY) {
+                                       PRINTF("Target %d not ready, retry %d\n",pccb->target,retrycnt);
+                                       for(t=0;t<SCSI_NOT_READY_TIME_OUT;t++)
+                                               udelay(1000); /* 1sec wait */
+                                       retrycnt++;
+                                       goto retry;
+                               }
+                               PRINTF("Target %d not ready, %d retried\n",pccb->target,retrycnt);
+                               return false;
+                       default:
+                               return false;
+               }
+       }
+       PRINTF("Status = %X\n",pccb->status);
+       return false;
+}
+
+
+void scsi_chip_init(void)
+{
+       /* first we issue a soft reset */
+       scsi_write_byte(ISTAT,SRST);
+       udelay(1000);
+       scsi_write_byte(ISTAT,0);
+       /* setup chip */
+       scsi_write_byte(SCNTL0,0xC0); /* full arbitration no start, no message, parity disabled, master */
+       scsi_write_byte(SCNTL1,0x00);
+       scsi_write_byte(SCNTL2,0x00);
+#ifndef CONFIG_SYS_SCSI_SYM53C8XX_CCF    /* config value for none 40 MHz clocks */
+       scsi_write_byte(SCNTL3,0x13); /* synchronous clock 40/4=10MHz, asynchronous 40MHz */
+#else
+       scsi_write_byte(SCNTL3,CONFIG_SYS_SCSI_SYM53C8XX_CCF); /* config value for none 40 MHz clocks */
+#endif
+       scsi_write_byte(SCID,0x47); /* ID=7, enable reselection */
+       scsi_write_byte(SXFER,0x00); /* synchronous transfer period 10MHz, asynchronous */
+       scsi_write_byte(SDID,0x00);  /* targed SCSI ID = 0 */
+       scsi_int_mask=0x0000; /* no Interrupt is enabled */
+       script_int_mask=0x00;
+       scsi_int_enable();
+       scsi_write_byte(GPREG,0x01); /* GPIO0 is LED (off) */
+       scsi_write_byte(GPCNTL,0x0E); /* GPIO0 is Output */
+       scsi_write_byte(STIME0,0x08); /* handshake timer disabled, selection timeout 512msec */
+       scsi_write_byte(RESPID,0x80); /* repond only to the own ID (reselection) */
+       scsi_write_byte(STEST1,0x00); /* not isolated, SCLK is used */
+       scsi_write_byte(STEST2,0x00); /* no Lowlevel Mode? */
+       scsi_write_byte(STEST3,0x80); /* enable tolerANT */
+       scsi_write_byte(CTEST3,0x04); /* clear FIFO */
+       scsi_write_byte(CTEST4,0x00);
+       scsi_write_byte(CTEST5,0x00);
+#ifdef SCSI_SINGLE_STEP
+/*     scsi_write_byte(DCNTL,IRQM | SSM);      */
+       scsi_write_byte(DCNTL,IRQD | SSM);
+       scsi_write_byte(DMODE,MAN);
+#else
+/*     scsi_write_byte(DCNTL,IRQM);    */
+       scsi_write_byte(DCNTL,IRQD);
+       scsi_write_byte(DMODE,0x00);
+#endif
+}
+#endif