Add qemu 2.4.0

[kvmfornfv.git] / qemu / roms / u-boot / doc / README.JFFS2_NAND

diff --git a/qemu/roms/u-boot/doc/README.JFFS2_NAND b/qemu/roms/u-boot/doc/README.JFFS2_NAND
new file mode 100644 (file)
index 0000000..09788d5
--- /dev/null
+++ b/qemu/roms/u-boot/doc/README.JFFS2_NAND
@@ -0,0 +1,24 @@
+JFFS2 NAND support:
+
+To enable, use the following #define in the board configuration file:
+
+#define CONFIG_JFFS2_NAND 1
+
+Configuration of partitions is similar to how this is done in  U-Boot
+for  JFFS2  on top NOR flash. If a single partition is used, it can be
+configured using the following #defines in the configuration file:
+
+#define CONFIG_JFFS2_NAND_DEV 0                        /* nand device jffs2 lives on */
+#define CONFIG_JFFS2_NAND_OFF 0                        /* start of jffs2 partition */
+#define CONFIG_JFFS2_NAND_SIZE 2*1024*1024     /* size of jffs2 partition */
+
+If more than a single partition is desired, the user can define a
+CONFIG_SYS_JFFS_CUSTOM_PART macro and implement a
+
+       struct part_info* jffs2_part_info(int part_num)
+
+function in a board-specific module. An example of such function is
+available in common/cmd_jffs2.c
+
+The default configuration for the DAVE board has a single JFFS2
+partition of 2 MB size.