--- /dev/null
+/*
+ * (C) Copyright 2000-2004
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+/*
+ * Serial up- and download support
+ */
+#include <common.h>
+#include <command.h>
+#include <s_record.h>
+#include <net.h>
+#include <exports.h>
+#include <xyzModem.h>
+
+DECLARE_GLOBAL_DATA_PTR;
+
+#if defined(CONFIG_CMD_LOADB)
+static ulong load_serial_ymodem(ulong offset, int mode);
+#endif
+
+#if defined(CONFIG_CMD_LOADS)
+static ulong load_serial(long offset);
+static int read_record(char *buf, ulong len);
+# if defined(CONFIG_CMD_SAVES)
+static int save_serial(ulong offset, ulong size);
+static int write_record(char *buf);
+#endif
+
+static int do_echo = 1;
+#endif
+
+/* -------------------------------------------------------------------- */
+
+#if defined(CONFIG_CMD_LOADS)
+static int do_load_serial(cmd_tbl_t *cmdtp, int flag, int argc,
+ char * const argv[])
+{
+ long offset = 0;
+ ulong addr;
+ int i;
+ char *env_echo;
+ int rcode = 0;
+#ifdef CONFIG_SYS_LOADS_BAUD_CHANGE
+ int load_baudrate, current_baudrate;
+
+ load_baudrate = current_baudrate = gd->baudrate;
+#endif
+
+ if (((env_echo = getenv("loads_echo")) != NULL) && (*env_echo == '1')) {
+ do_echo = 1;
+ } else {
+ do_echo = 0;
+ }
+
+#ifdef CONFIG_SYS_LOADS_BAUD_CHANGE
+ if (argc >= 2) {
+ offset = simple_strtol(argv[1], NULL, 16);
+ }
+ if (argc == 3) {
+ load_baudrate = (int)simple_strtoul(argv[2], NULL, 10);
+
+ /* default to current baudrate */
+ if (load_baudrate == 0)
+ load_baudrate = current_baudrate;
+ }
+ if (load_baudrate != current_baudrate) {
+ printf("## Switch baudrate to %d bps and press ENTER ...\n",
+ load_baudrate);
+ udelay(50000);
+ gd->baudrate = load_baudrate;
+ serial_setbrg();
+ udelay(50000);
+ for (;;) {
+ if (getc() == '\r')
+ break;
+ }
+ }
+#else /* ! CONFIG_SYS_LOADS_BAUD_CHANGE */
+ if (argc == 2) {
+ offset = simple_strtol(argv[1], NULL, 16);
+ }
+#endif /* CONFIG_SYS_LOADS_BAUD_CHANGE */
+
+ printf("## Ready for S-Record download ...\n");
+
+ addr = load_serial(offset);
+
+ /*
+ * Gather any trailing characters (for instance, the ^D which
+ * is sent by 'cu' after sending a file), and give the
+ * box some time (100 * 1 ms)
+ */
+ for (i=0; i<100; ++i) {
+ if (tstc()) {
+ (void) getc();
+ }
+ udelay(1000);
+ }
+
+ if (addr == ~0) {
+ printf("## S-Record download aborted\n");
+ rcode = 1;
+ } else {
+ printf("## Start Addr = 0x%08lX\n", addr);
+ load_addr = addr;
+ }
+
+#ifdef CONFIG_SYS_LOADS_BAUD_CHANGE
+ if (load_baudrate != current_baudrate) {
+ printf("## Switch baudrate to %d bps and press ESC ...\n",
+ current_baudrate);
+ udelay(50000);
+ gd->baudrate = current_baudrate;
+ serial_setbrg();
+ udelay(50000);
+ for (;;) {
+ if (getc() == 0x1B) /* ESC */
+ break;
+ }
+ }
+#endif
+ return rcode;
+}
+
+static ulong load_serial(long offset)
+{
+ char record[SREC_MAXRECLEN + 1]; /* buffer for one S-Record */
+ char binbuf[SREC_MAXBINLEN]; /* buffer for binary data */
+ int binlen; /* no. of data bytes in S-Rec. */
+ int type; /* return code for record type */
+ ulong addr; /* load address from S-Record */
+ ulong size; /* number of bytes transferred */
+ ulong store_addr;
+ ulong start_addr = ~0;
+ ulong end_addr = 0;
+ int line_count = 0;
+
+ while (read_record(record, SREC_MAXRECLEN + 1) >= 0) {
+ type = srec_decode(record, &binlen, &addr, binbuf);
+
+ if (type < 0) {
+ return (~0); /* Invalid S-Record */
+ }
+
+ switch (type) {
+ case SREC_DATA2:
+ case SREC_DATA3:
+ case SREC_DATA4:
+ store_addr = addr + offset;
+#ifndef CONFIG_SYS_NO_FLASH
+ if (addr2info(store_addr)) {
+ int rc;
+
+ rc = flash_write((char *)binbuf,store_addr,binlen);
+ if (rc != 0) {
+ flash_perror(rc);
+ return (~0);
+ }
+ } else
+#endif
+ {
+ memcpy((char *)(store_addr), binbuf, binlen);
+ }
+ if ((store_addr) < start_addr)
+ start_addr = store_addr;
+ if ((store_addr + binlen - 1) > end_addr)
+ end_addr = store_addr + binlen - 1;
+ break;
+ case SREC_END2:
+ case SREC_END3:
+ case SREC_END4:
+ udelay(10000);
+ size = end_addr - start_addr + 1;
+ printf("\n"
+ "## First Load Addr = 0x%08lX\n"
+ "## Last Load Addr = 0x%08lX\n"
+ "## Total Size = 0x%08lX = %ld Bytes\n",
+ start_addr, end_addr, size, size
+ );
+ flush_cache(start_addr, size);
+ setenv_hex("filesize", size);
+ return (addr);
+ case SREC_START:
+ break;
+ default:
+ break;
+ }
+ if (!do_echo) { /* print a '.' every 100 lines */
+ if ((++line_count % 100) == 0)
+ putc('.');
+ }
+ }
+
+ return (~0); /* Download aborted */
+}
+
+static int read_record(char *buf, ulong len)
+{
+ char *p;
+ char c;
+
+ --len; /* always leave room for terminating '\0' byte */
+
+ for (p=buf; p < buf+len; ++p) {
+ c = getc(); /* read character */
+ if (do_echo)
+ putc(c); /* ... and echo it */
+
+ switch (c) {
+ case '\r':
+ case '\n':
+ *p = '\0';
+ return (p - buf);
+ case '\0':
+ case 0x03: /* ^C - Control C */
+ return (-1);
+ default:
+ *p = c;
+ }
+
+ /* Check for the console hangup (if any different from serial) */
+ if (gd->jt[XF_getc] != getc) {
+ if (ctrlc()) {
+ return (-1);
+ }
+ }
+ }
+
+ /* line too long - truncate */
+ *p = '\0';
+ return (p - buf);
+}
+
+#if defined(CONFIG_CMD_SAVES)
+
+int do_save_serial (cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
+{
+ ulong offset = 0;
+ ulong size = 0;
+#ifdef CONFIG_SYS_LOADS_BAUD_CHANGE
+ int save_baudrate, current_baudrate;
+
+ save_baudrate = current_baudrate = gd->baudrate;
+#endif
+
+ if (argc >= 2) {
+ offset = simple_strtoul(argv[1], NULL, 16);
+ }
+#ifdef CONFIG_SYS_LOADS_BAUD_CHANGE
+ if (argc >= 3) {
+ size = simple_strtoul(argv[2], NULL, 16);
+ }
+ if (argc == 4) {
+ save_baudrate = (int)simple_strtoul(argv[3], NULL, 10);
+
+ /* default to current baudrate */
+ if (save_baudrate == 0)
+ save_baudrate = current_baudrate;
+ }
+ if (save_baudrate != current_baudrate) {
+ printf("## Switch baudrate to %d bps and press ENTER ...\n",
+ save_baudrate);
+ udelay(50000);
+ gd->baudrate = save_baudrate;
+ serial_setbrg();
+ udelay(50000);
+ for (;;) {
+ if (getc() == '\r')
+ break;
+ }
+ }
+#else /* ! CONFIG_SYS_LOADS_BAUD_CHANGE */
+ if (argc == 3) {
+ size = simple_strtoul(argv[2], NULL, 16);
+ }
+#endif /* CONFIG_SYS_LOADS_BAUD_CHANGE */
+
+ printf("## Ready for S-Record upload, press ENTER to proceed ...\n");
+ for (;;) {
+ if (getc() == '\r')
+ break;
+ }
+ if (save_serial(offset, size)) {
+ printf("## S-Record upload aborted\n");
+ } else {
+ printf("## S-Record upload complete\n");
+ }
+#ifdef CONFIG_SYS_LOADS_BAUD_CHANGE
+ if (save_baudrate != current_baudrate) {
+ printf("## Switch baudrate to %d bps and press ESC ...\n",
+ (int)current_baudrate);
+ udelay(50000);
+ gd->baudrate = current_baudrate;
+ serial_setbrg();
+ udelay(50000);
+ for (;;) {
+ if (getc() == 0x1B) /* ESC */
+ break;
+ }
+ }
+#endif
+ return 0;
+}
+
+#define SREC3_START "S0030000FC\n"
+#define SREC3_FORMAT "S3%02X%08lX%s%02X\n"
+#define SREC3_END "S70500000000FA\n"
+#define SREC_BYTES_PER_RECORD 16
+
+static int save_serial(ulong address, ulong count)
+{
+ int i, c, reclen, checksum, length;
+ char *hex = "0123456789ABCDEF";
+ char record[2*SREC_BYTES_PER_RECORD+16]; /* buffer for one S-Record */
+ char data[2*SREC_BYTES_PER_RECORD+1]; /* buffer for hex data */
+
+ reclen = 0;
+ checksum = 0;
+
+ if(write_record(SREC3_START)) /* write the header */
+ return (-1);
+ do {
+ if(count) { /* collect hex data in the buffer */
+ c = *(volatile uchar*)(address + reclen); /* get one byte */
+ checksum += c; /* accumulate checksum */
+ data[2*reclen] = hex[(c>>4)&0x0f];
+ data[2*reclen+1] = hex[c & 0x0f];
+ data[2*reclen+2] = '\0';
+ ++reclen;
+ --count;
+ }
+ if(reclen == SREC_BYTES_PER_RECORD || count == 0) {
+ /* enough data collected for one record: dump it */
+ if(reclen) { /* build & write a data record: */
+ /* address + data + checksum */
+ length = 4 + reclen + 1;
+
+ /* accumulate length bytes into checksum */
+ for(i = 0; i < 2; i++)
+ checksum += (length >> (8*i)) & 0xff;
+
+ /* accumulate address bytes into checksum: */
+ for(i = 0; i < 4; i++)
+ checksum += (address >> (8*i)) & 0xff;
+
+ /* make proper checksum byte: */
+ checksum = ~checksum & 0xff;
+
+ /* output one record: */
+ sprintf(record, SREC3_FORMAT, length, address, data, checksum);
+ if(write_record(record))
+ return (-1);
+ }
+ address += reclen; /* increment address */
+ checksum = 0;
+ reclen = 0;
+ }
+ }
+ while(count);
+ if(write_record(SREC3_END)) /* write the final record */
+ return (-1);
+ return(0);
+}
+
+static int write_record(char *buf)
+{
+ char c;
+
+ while((c = *buf++))
+ putc(c);
+
+ /* Check for the console hangup (if any different from serial) */
+
+ if (ctrlc()) {
+ return (-1);
+ }
+ return (0);
+}
+# endif
+
+#endif
+
+
+#if defined(CONFIG_CMD_LOADB)
+/*
+ * loadb command (load binary) included
+ */
+#define XON_CHAR 17
+#define XOFF_CHAR 19
+#define START_CHAR 0x01
+#define ETX_CHAR 0x03
+#define END_CHAR 0x0D
+#define SPACE 0x20
+#define K_ESCAPE 0x23
+#define SEND_TYPE 'S'
+#define DATA_TYPE 'D'
+#define ACK_TYPE 'Y'
+#define NACK_TYPE 'N'
+#define BREAK_TYPE 'B'
+#define tochar(x) ((char) (((x) + SPACE) & 0xff))
+#define untochar(x) ((int) (((x) - SPACE) & 0xff))
+
+static void set_kerm_bin_mode(unsigned long *);
+static int k_recv(void);
+static ulong load_serial_bin(ulong offset);
+
+
+static char his_eol; /* character he needs at end of packet */
+static int his_pad_count; /* number of pad chars he needs */
+static char his_pad_char; /* pad chars he needs */
+static char his_quote; /* quote chars he'll use */
+
+static int do_load_serial_bin(cmd_tbl_t *cmdtp, int flag, int argc,
+ char * const argv[])
+{
+ ulong offset = 0;
+ ulong addr;
+ int load_baudrate, current_baudrate;
+ int rcode = 0;
+ char *s;
+
+ /* pre-set offset from CONFIG_SYS_LOAD_ADDR */
+ offset = CONFIG_SYS_LOAD_ADDR;
+
+ /* pre-set offset from $loadaddr */
+ if ((s = getenv("loadaddr")) != NULL) {
+ offset = simple_strtoul(s, NULL, 16);
+ }
+
+ load_baudrate = current_baudrate = gd->baudrate;
+
+ if (argc >= 2) {
+ offset = simple_strtoul(argv[1], NULL, 16);
+ }
+ if (argc == 3) {
+ load_baudrate = (int)simple_strtoul(argv[2], NULL, 10);
+
+ /* default to current baudrate */
+ if (load_baudrate == 0)
+ load_baudrate = current_baudrate;
+ }
+
+ if (load_baudrate != current_baudrate) {
+ printf("## Switch baudrate to %d bps and press ENTER ...\n",
+ load_baudrate);
+ udelay(50000);
+ gd->baudrate = load_baudrate;
+ serial_setbrg();
+ udelay(50000);
+ for (;;) {
+ if (getc() == '\r')
+ break;
+ }
+ }
+
+ if (strcmp(argv[0],"loady")==0) {
+ printf("## Ready for binary (ymodem) download "
+ "to 0x%08lX at %d bps...\n",
+ offset,
+ load_baudrate);
+
+ addr = load_serial_ymodem(offset, xyzModem_ymodem);
+
+ } else if (strcmp(argv[0],"loadx")==0) {
+ printf("## Ready for binary (xmodem) download "
+ "to 0x%08lX at %d bps...\n",
+ offset,
+ load_baudrate);
+
+ addr = load_serial_ymodem(offset, xyzModem_xmodem);
+
+ } else {
+
+ printf("## Ready for binary (kermit) download "
+ "to 0x%08lX at %d bps...\n",
+ offset,
+ load_baudrate);
+ addr = load_serial_bin(offset);
+
+ if (addr == ~0) {
+ load_addr = 0;
+ printf("## Binary (kermit) download aborted\n");
+ rcode = 1;
+ } else {
+ printf("## Start Addr = 0x%08lX\n", addr);
+ load_addr = addr;
+ }
+ }
+ if (load_baudrate != current_baudrate) {
+ printf("## Switch baudrate to %d bps and press ESC ...\n",
+ current_baudrate);
+ udelay(50000);
+ gd->baudrate = current_baudrate;
+ serial_setbrg();
+ udelay(50000);
+ for (;;) {
+ if (getc() == 0x1B) /* ESC */
+ break;
+ }
+ }
+
+ return rcode;
+}
+
+
+static ulong load_serial_bin(ulong offset)
+{
+ int size, i;
+
+ set_kerm_bin_mode((ulong *) offset);
+ size = k_recv();
+
+ /*
+ * Gather any trailing characters (for instance, the ^D which
+ * is sent by 'cu' after sending a file), and give the
+ * box some time (100 * 1 ms)
+ */
+ for (i=0; i<100; ++i) {
+ if (tstc()) {
+ (void) getc();
+ }
+ udelay(1000);
+ }
+
+ flush_cache(offset, size);
+
+ printf("## Total Size = 0x%08x = %d Bytes\n", size, size);
+ setenv_hex("filesize", size);
+
+ return offset;
+}
+
+static void send_pad(void)
+{
+ int count = his_pad_count;
+
+ while (count-- > 0)
+ putc(his_pad_char);
+}
+
+/* converts escaped kermit char to binary char */
+static char ktrans(char in)
+{
+ if ((in & 0x60) == 0x40) {
+ return (char) (in & ~0x40);
+ } else if ((in & 0x7f) == 0x3f) {
+ return (char) (in | 0x40);
+ } else
+ return in;
+}
+
+static int chk1(char *buffer)
+{
+ int total = 0;
+
+ while (*buffer) {
+ total += *buffer++;
+ }
+ return (int) ((total + ((total >> 6) & 0x03)) & 0x3f);
+}
+
+static void s1_sendpacket(char *packet)
+{
+ send_pad();
+ while (*packet) {
+ putc(*packet++);
+ }
+}
+
+static char a_b[24];
+static void send_ack(int n)
+{
+ a_b[0] = START_CHAR;
+ a_b[1] = tochar(3);
+ a_b[2] = tochar(n);
+ a_b[3] = ACK_TYPE;
+ a_b[4] = '\0';
+ a_b[4] = tochar(chk1(&a_b[1]));
+ a_b[5] = his_eol;
+ a_b[6] = '\0';
+ s1_sendpacket(a_b);
+}
+
+static void send_nack(int n)
+{
+ a_b[0] = START_CHAR;
+ a_b[1] = tochar(3);
+ a_b[2] = tochar(n);
+ a_b[3] = NACK_TYPE;
+ a_b[4] = '\0';
+ a_b[4] = tochar(chk1(&a_b[1]));
+ a_b[5] = his_eol;
+ a_b[6] = '\0';
+ s1_sendpacket(a_b);
+}
+
+
+static void (*os_data_init)(void);
+static void (*os_data_char)(char new_char);
+static int os_data_state, os_data_state_saved;
+static char *os_data_addr, *os_data_addr_saved;
+static char *bin_start_address;
+
+static void bin_data_init(void)
+{
+ os_data_state = 0;
+ os_data_addr = bin_start_address;
+}
+
+static void os_data_save(void)
+{
+ os_data_state_saved = os_data_state;
+ os_data_addr_saved = os_data_addr;
+}
+
+static void os_data_restore(void)
+{
+ os_data_state = os_data_state_saved;
+ os_data_addr = os_data_addr_saved;
+}
+
+static void bin_data_char(char new_char)
+{
+ switch (os_data_state) {
+ case 0: /* data */
+ *os_data_addr++ = new_char;
+ break;
+ }
+}
+
+static void set_kerm_bin_mode(unsigned long *addr)
+{
+ bin_start_address = (char *) addr;
+ os_data_init = bin_data_init;
+ os_data_char = bin_data_char;
+}
+
+
+/* k_data_* simply handles the kermit escape translations */
+static int k_data_escape, k_data_escape_saved;
+static void k_data_init(void)
+{
+ k_data_escape = 0;
+ os_data_init();
+}
+
+static void k_data_save(void)
+{
+ k_data_escape_saved = k_data_escape;
+ os_data_save();
+}
+
+static void k_data_restore(void)
+{
+ k_data_escape = k_data_escape_saved;
+ os_data_restore();
+}
+
+static void k_data_char(char new_char)
+{
+ if (k_data_escape) {
+ /* last char was escape - translate this character */
+ os_data_char(ktrans(new_char));
+ k_data_escape = 0;
+ } else {
+ if (new_char == his_quote) {
+ /* this char is escape - remember */
+ k_data_escape = 1;
+ } else {
+ /* otherwise send this char as-is */
+ os_data_char(new_char);
+ }
+ }
+}
+
+#define SEND_DATA_SIZE 20
+static char send_parms[SEND_DATA_SIZE];
+static char *send_ptr;
+
+/* handle_send_packet interprits the protocol info and builds and
+ sends an appropriate ack for what we can do */
+static void handle_send_packet(int n)
+{
+ int length = 3;
+ int bytes;
+
+ /* initialize some protocol parameters */
+ his_eol = END_CHAR; /* default end of line character */
+ his_pad_count = 0;
+ his_pad_char = '\0';
+ his_quote = K_ESCAPE;
+
+ /* ignore last character if it filled the buffer */
+ if (send_ptr == &send_parms[SEND_DATA_SIZE - 1])
+ --send_ptr;
+ bytes = send_ptr - send_parms; /* how many bytes we'll process */
+ do {
+ if (bytes-- <= 0)
+ break;
+ /* handle MAXL - max length */
+ /* ignore what he says - most I'll take (here) is 94 */
+ a_b[++length] = tochar(94);
+ if (bytes-- <= 0)
+ break;
+ /* handle TIME - time you should wait for my packets */
+ /* ignore what he says - don't wait for my ack longer than 1 second */
+ a_b[++length] = tochar(1);
+ if (bytes-- <= 0)
+ break;
+ /* handle NPAD - number of pad chars I need */
+ /* remember what he says - I need none */
+ his_pad_count = untochar(send_parms[2]);
+ a_b[++length] = tochar(0);
+ if (bytes-- <= 0)
+ break;
+ /* handle PADC - pad chars I need */
+ /* remember what he says - I need none */
+ his_pad_char = ktrans(send_parms[3]);
+ a_b[++length] = 0x40; /* He should ignore this */
+ if (bytes-- <= 0)
+ break;
+ /* handle EOL - end of line he needs */
+ /* remember what he says - I need CR */
+ his_eol = untochar(send_parms[4]);
+ a_b[++length] = tochar(END_CHAR);
+ if (bytes-- <= 0)
+ break;
+ /* handle QCTL - quote control char he'll use */
+ /* remember what he says - I'll use '#' */
+ his_quote = send_parms[5];
+ a_b[++length] = '#';
+ if (bytes-- <= 0)
+ break;
+ /* handle QBIN - 8-th bit prefixing */
+ /* ignore what he says - I refuse */
+ a_b[++length] = 'N';
+ if (bytes-- <= 0)
+ break;
+ /* handle CHKT - the clock check type */
+ /* ignore what he says - I do type 1 (for now) */
+ a_b[++length] = '1';
+ if (bytes-- <= 0)
+ break;
+ /* handle REPT - the repeat prefix */
+ /* ignore what he says - I refuse (for now) */
+ a_b[++length] = 'N';
+ if (bytes-- <= 0)
+ break;
+ /* handle CAPAS - the capabilities mask */
+ /* ignore what he says - I only do long packets - I don't do windows */
+ a_b[++length] = tochar(2); /* only long packets */
+ a_b[++length] = tochar(0); /* no windows */
+ a_b[++length] = tochar(94); /* large packet msb */
+ a_b[++length] = tochar(94); /* large packet lsb */
+ } while (0);
+
+ a_b[0] = START_CHAR;
+ a_b[1] = tochar(length);
+ a_b[2] = tochar(n);
+ a_b[3] = ACK_TYPE;
+ a_b[++length] = '\0';
+ a_b[length] = tochar(chk1(&a_b[1]));
+ a_b[++length] = his_eol;
+ a_b[++length] = '\0';
+ s1_sendpacket(a_b);
+}
+
+/* k_recv receives a OS Open image file over kermit line */
+static int k_recv(void)
+{
+ char new_char;
+ char k_state, k_state_saved;
+ int sum;
+ int done;
+ int length;
+ int n, last_n;
+ int len_lo, len_hi;
+
+ /* initialize some protocol parameters */
+ his_eol = END_CHAR; /* default end of line character */
+ his_pad_count = 0;
+ his_pad_char = '\0';
+ his_quote = K_ESCAPE;
+
+ /* initialize the k_recv and k_data state machine */
+ done = 0;
+ k_state = 0;
+ k_data_init();
+ k_state_saved = k_state;
+ k_data_save();
+ n = 0; /* just to get rid of a warning */
+ last_n = -1;
+
+ /* expect this "type" sequence (but don't check):
+ S: send initiate
+ F: file header
+ D: data (multiple)
+ Z: end of file
+ B: break transmission
+ */
+
+ /* enter main loop */
+ while (!done) {
+ /* set the send packet pointer to begining of send packet parms */
+ send_ptr = send_parms;
+
+ /* With each packet, start summing the bytes starting with the length.
+ Save the current sequence number.
+ Note the type of the packet.
+ If a character less than SPACE (0x20) is received - error.
+ */
+
+#if 0
+ /* OLD CODE, Prior to checking sequence numbers */
+ /* first have all state machines save current states */
+ k_state_saved = k_state;
+ k_data_save ();
+#endif
+
+ /* get a packet */
+ /* wait for the starting character or ^C */
+ for (;;) {
+ switch (getc ()) {
+ case START_CHAR: /* start packet */
+ goto START;
+ case ETX_CHAR: /* ^C waiting for packet */
+ return (0);
+ default:
+ ;
+ }
+ }
+START:
+ /* get length of packet */
+ sum = 0;
+ new_char = getc();
+ if ((new_char & 0xE0) == 0)
+ goto packet_error;
+ sum += new_char & 0xff;
+ length = untochar(new_char);
+ /* get sequence number */
+ new_char = getc();
+ if ((new_char & 0xE0) == 0)
+ goto packet_error;
+ sum += new_char & 0xff;
+ n = untochar(new_char);
+ --length;
+
+ /* NEW CODE - check sequence numbers for retried packets */
+ /* Note - this new code assumes that the sequence number is correctly
+ * received. Handling an invalid sequence number adds another layer
+ * of complexity that may not be needed - yet! At this time, I'm hoping
+ * that I don't need to buffer the incoming data packets and can write
+ * the data into memory in real time.
+ */
+ if (n == last_n) {
+ /* same sequence number, restore the previous state */
+ k_state = k_state_saved;
+ k_data_restore();
+ } else {
+ /* new sequence number, checkpoint the download */
+ last_n = n;
+ k_state_saved = k_state;
+ k_data_save();
+ }
+ /* END NEW CODE */
+
+ /* get packet type */
+ new_char = getc();
+ if ((new_char & 0xE0) == 0)
+ goto packet_error;
+ sum += new_char & 0xff;
+ k_state = new_char;
+ --length;
+ /* check for extended length */
+ if (length == -2) {
+ /* (length byte was 0, decremented twice) */
+ /* get the two length bytes */
+ new_char = getc();
+ if ((new_char & 0xE0) == 0)
+ goto packet_error;
+ sum += new_char & 0xff;
+ len_hi = untochar(new_char);
+ new_char = getc();
+ if ((new_char & 0xE0) == 0)
+ goto packet_error;
+ sum += new_char & 0xff;
+ len_lo = untochar(new_char);
+ length = len_hi * 95 + len_lo;
+ /* check header checksum */
+ new_char = getc();
+ if ((new_char & 0xE0) == 0)
+ goto packet_error;
+ if (new_char != tochar((sum + ((sum >> 6) & 0x03)) & 0x3f))
+ goto packet_error;
+ sum += new_char & 0xff;
+/* --length; */ /* new length includes only data and block check to come */
+ }
+ /* bring in rest of packet */
+ while (length > 1) {
+ new_char = getc();
+ if ((new_char & 0xE0) == 0)
+ goto packet_error;
+ sum += new_char & 0xff;
+ --length;
+ if (k_state == DATA_TYPE) {
+ /* pass on the data if this is a data packet */
+ k_data_char (new_char);
+ } else if (k_state == SEND_TYPE) {
+ /* save send pack in buffer as is */
+ *send_ptr++ = new_char;
+ /* if too much data, back off the pointer */
+ if (send_ptr >= &send_parms[SEND_DATA_SIZE])
+ --send_ptr;
+ }
+ }
+ /* get and validate checksum character */
+ new_char = getc();
+ if ((new_char & 0xE0) == 0)
+ goto packet_error;
+ if (new_char != tochar((sum + ((sum >> 6) & 0x03)) & 0x3f))
+ goto packet_error;
+ /* get END_CHAR */
+ new_char = getc();
+ if (new_char != END_CHAR) {
+ packet_error:
+ /* restore state machines */
+ k_state = k_state_saved;
+ k_data_restore();
+ /* send a negative acknowledge packet in */
+ send_nack(n);
+ } else if (k_state == SEND_TYPE) {
+ /* crack the protocol parms, build an appropriate ack packet */
+ handle_send_packet(n);
+ } else {
+ /* send simple acknowledge packet in */
+ send_ack(n);
+ /* quit if end of transmission */
+ if (k_state == BREAK_TYPE)
+ done = 1;
+ }
+ }
+ return ((ulong) os_data_addr - (ulong) bin_start_address);
+}
+
+static int getcxmodem(void) {
+ if (tstc())
+ return (getc());
+ return -1;
+}
+static ulong load_serial_ymodem(ulong offset, int mode)
+{
+ int size;
+ int err;
+ int res;
+ connection_info_t info;
+ char ymodemBuf[1024];
+ ulong store_addr = ~0;
+ ulong addr = 0;
+
+ size = 0;
+ info.mode = mode;
+ res = xyzModem_stream_open(&info, &err);
+ if (!res) {
+
+ while ((res =
+ xyzModem_stream_read(ymodemBuf, 1024, &err)) > 0) {
+ store_addr = addr + offset;
+ size += res;
+ addr += res;
+#ifndef CONFIG_SYS_NO_FLASH
+ if (addr2info(store_addr)) {
+ int rc;
+
+ rc = flash_write((char *) ymodemBuf,
+ store_addr, res);
+ if (rc != 0) {
+ flash_perror (rc);
+ return (~0);
+ }
+ } else
+#endif
+ {
+ memcpy((char *)(store_addr), ymodemBuf,
+ res);
+ }
+
+ }
+ } else {
+ printf("%s\n", xyzModem_error(err));
+ }
+
+ xyzModem_stream_close(&err);
+ xyzModem_stream_terminate(false, &getcxmodem);
+
+
+ flush_cache(offset, size);
+
+ printf("## Total Size = 0x%08x = %d Bytes\n", size, size);
+ setenv_hex("filesize", size);
+
+ return offset;
+}
+
+#endif
+
+/* -------------------------------------------------------------------- */
+
+#if defined(CONFIG_CMD_LOADS)
+
+#ifdef CONFIG_SYS_LOADS_BAUD_CHANGE
+U_BOOT_CMD(
+ loads, 3, 0, do_load_serial,
+ "load S-Record file over serial line",
+ "[ off ] [ baud ]\n"
+ " - load S-Record file over serial line"
+ " with offset 'off' and baudrate 'baud'"
+);
+
+#else /* ! CONFIG_SYS_LOADS_BAUD_CHANGE */
+U_BOOT_CMD(
+ loads, 2, 0, do_load_serial,
+ "load S-Record file over serial line",
+ "[ off ]\n"
+ " - load S-Record file over serial line with offset 'off'"
+);
+#endif /* CONFIG_SYS_LOADS_BAUD_CHANGE */
+
+/*
+ * SAVES always requires LOADS support, but not vice versa
+ */
+
+
+#if defined(CONFIG_CMD_SAVES)
+#ifdef CONFIG_SYS_LOADS_BAUD_CHANGE
+U_BOOT_CMD(
+ saves, 4, 0, do_save_serial,
+ "save S-Record file over serial line",
+ "[ off ] [size] [ baud ]\n"
+ " - save S-Record file over serial line"
+ " with offset 'off', size 'size' and baudrate 'baud'"
+);
+#else /* ! CONFIG_SYS_LOADS_BAUD_CHANGE */
+U_BOOT_CMD(
+ saves, 3, 0, do_save_serial,
+ "save S-Record file over serial line",
+ "[ off ] [size]\n"
+ " - save S-Record file over serial line with offset 'off' and size 'size'"
+);
+#endif /* CONFIG_SYS_LOADS_BAUD_CHANGE */
+#endif /* CONFIG_CMD_SAVES */
+#endif /* CONFIG_CMD_LOADS */
+
+
+#if defined(CONFIG_CMD_LOADB)
+U_BOOT_CMD(
+ loadb, 3, 0, do_load_serial_bin,
+ "load binary file over serial line (kermit mode)",
+ "[ off ] [ baud ]\n"
+ " - load binary file over serial line"
+ " with offset 'off' and baudrate 'baud'"
+);
+
+U_BOOT_CMD(
+ loadx, 3, 0, do_load_serial_bin,
+ "load binary file over serial line (xmodem mode)",
+ "[ off ] [ baud ]\n"
+ " - load binary file over serial line"
+ " with offset 'off' and baudrate 'baud'"
+);
+
+U_BOOT_CMD(
+ loady, 3, 0, do_load_serial_bin,
+ "load binary file over serial line (ymodem mode)",
+ "[ off ] [ baud ]\n"
+ " - load binary file over serial line"
+ " with offset 'off' and baudrate 'baud'"
+);
+
+#endif /* CONFIG_CMD_LOADB */
+
+/* -------------------------------------------------------------------- */
+
+#if defined(CONFIG_CMD_HWFLOW)
+int do_hwflow(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
+{
+ extern int hwflow_onoff(int);
+
+ if (argc == 2) {
+ if (strcmp(argv[1], "off") == 0)
+ hwflow_onoff(-1);
+ else
+ if (strcmp(argv[1], "on") == 0)
+ hwflow_onoff(1);
+ else
+ return CMD_RET_USAGE;
+ }
+ printf("RTS/CTS hardware flow control: %s\n", hwflow_onoff(0) ? "on" : "off");
+ return 0;
+}
+
+/* -------------------------------------------------------------------- */
+
+U_BOOT_CMD(
+ hwflow, 2, 0, do_hwflow,
+ "turn RTS/CTS hardware flow control in serial line on/off",
+ "[on|off]"
+);
+
+#endif /* CONFIG_CMD_HWFLOW */
Code Review / kvmfornfv.git / blobdiff