--- /dev/null
+/*
+ * Copyright (c) 2011 The Chromium OS Authors.
+ * (C) Copyright 2002-2006
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
+ * (C) Copyright 2002
+ * Sysgo Real-Time Solutions, GmbH <www.elinos.com>
+ * Marius Groeger <mgroeger@sysgo.de>
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#include <common.h>
+/* TODO: can we just include all these headers whether needed or not? */
+#if defined(CONFIG_CMD_BEDBUG)
+#include <bedbug/type.h>
+#endif
+#ifdef CONFIG_HAS_DATAFLASH
+#include <dataflash.h>
+#endif
+#include <dm.h>
+#include <environment.h>
+#include <fdtdec.h>
+#if defined(CONFIG_CMD_IDE)
+#include <ide.h>
+#endif
+#include <initcall.h>
+#ifdef CONFIG_PS2KBD
+#include <keyboard.h>
+#endif
+#if defined(CONFIG_CMD_KGDB)
+#include <kgdb.h>
+#endif
+#include <logbuff.h>
+#include <malloc.h>
+#ifdef CONFIG_BITBANGMII
+#include <miiphy.h>
+#endif
+#include <mmc.h>
+#include <nand.h>
+#include <onenand_uboot.h>
+#include <scsi.h>
+#include <serial.h>
+#include <spi.h>
+#include <stdio_dev.h>
+#include <trace.h>
+#include <watchdog.h>
+#ifdef CONFIG_ADDR_MAP
+#include <asm/mmu.h>
+#endif
+#include <asm/sections.h>
+#ifdef CONFIG_X86
+#include <asm/init_helpers.h>
+#endif
+#include <dm/root.h>
+#include <linux/compiler.h>
+#include <linux/err.h>
+
+DECLARE_GLOBAL_DATA_PTR;
+
+ulong monitor_flash_len;
+
+int __board_flash_wp_on(void)
+{
+ /*
+ * Most flashes can't be detected when write protection is enabled,
+ * so provide a way to let U-Boot gracefully ignore write protected
+ * devices.
+ */
+ return 0;
+}
+
+int board_flash_wp_on(void)
+ __attribute__ ((weak, alias("__board_flash_wp_on")));
+
+void __cpu_secondary_init_r(void)
+{
+}
+
+void cpu_secondary_init_r(void)
+ __attribute__ ((weak, alias("__cpu_secondary_init_r")));
+
+static int initr_secondary_cpu(void)
+{
+ /*
+ * after non-volatile devices & environment is setup and cpu code have
+ * another round to deal with any initialization that might require
+ * full access to the environment or loading of some image (firmware)
+ * from a non-volatile device
+ */
+ /* TODO: maybe define this for all archs? */
+ cpu_secondary_init_r();
+
+ return 0;
+}
+
+static int initr_trace(void)
+{
+#ifdef CONFIG_TRACE
+ trace_init(gd->trace_buff, CONFIG_TRACE_BUFFER_SIZE);
+#endif
+
+ return 0;
+}
+
+static int initr_reloc(void)
+{
+ gd->flags |= GD_FLG_RELOC; /* tell others: relocation done */
+ bootstage_mark_name(BOOTSTAGE_ID_START_UBOOT_R, "board_init_r");
+
+ return 0;
+}
+
+#ifdef CONFIG_ARM
+/*
+ * Some of these functions are needed purely because the functions they
+ * call return void. If we change them to return 0, these stubs can go away.
+ */
+static int initr_caches(void)
+{
+ /* Enable caches */
+ enable_caches();
+ return 0;
+}
+#endif
+
+__weak int fixup_cpu(void)
+{
+ return 0;
+}
+
+static int initr_reloc_global_data(void)
+{
+#ifdef __ARM__
+ monitor_flash_len = _end - __image_copy_start;
+#elif !defined(CONFIG_SANDBOX)
+ monitor_flash_len = (ulong)&__init_end - gd->relocaddr;
+#endif
+#if defined(CONFIG_MPC85xx) || defined(CONFIG_MPC86xx)
+ /*
+ * The gd->cpu pointer is set to an address in flash before relocation.
+ * We need to update it to point to the same CPU entry in RAM.
+ * TODO: why not just add gd->reloc_ofs?
+ */
+ gd->arch.cpu += gd->relocaddr - CONFIG_SYS_MONITOR_BASE;
+
+ /*
+ * If we didn't know the cpu mask & # cores, we can save them of
+ * now rather than 'computing' them constantly
+ */
+ fixup_cpu();
+#endif
+#ifdef CONFIG_SYS_EXTRA_ENV_RELOC
+ /*
+ * Some systems need to relocate the env_addr pointer early because the
+ * location it points to will get invalidated before env_relocate is
+ * called. One example is on systems that might use a L2 or L3 cache
+ * in SRAM mode and initialize that cache from SRAM mode back to being
+ * a cache in cpu_init_r.
+ */
+ gd->env_addr += gd->relocaddr - CONFIG_SYS_MONITOR_BASE;
+#endif
+ return 0;
+}
+
+static int initr_serial(void)
+{
+ serial_initialize();
+ return 0;
+}
+
+#ifdef CONFIG_PPC
+static int initr_trap(void)
+{
+ /*
+ * Setup trap handlers
+ */
+ trap_init(gd->relocaddr);
+
+ return 0;
+}
+#endif
+
+#ifdef CONFIG_ADDR_MAP
+static int initr_addr_map(void)
+{
+ init_addr_map();
+
+ return 0;
+}
+#endif
+
+#ifdef CONFIG_LOGBUFFER
+unsigned long logbuffer_base(void)
+{
+ return gd->ram_top - LOGBUFF_LEN;
+}
+
+static int initr_logbuffer(void)
+{
+ logbuff_init_ptrs();
+ return 0;
+}
+#endif
+
+#ifdef CONFIG_POST
+static int initr_post_backlog(void)
+{
+ post_output_backlog();
+ return 0;
+}
+#endif
+
+#ifdef CONFIG_SYS_DELAYED_ICACHE
+static int initr_icache_enable(void)
+{
+ return 0;
+}
+#endif
+
+#if defined(CONFIG_SYS_INIT_RAM_LOCK) && defined(CONFIG_E500)
+static int initr_unlock_ram_in_cache(void)
+{
+ unlock_ram_in_cache(); /* it's time to unlock D-cache in e500 */
+ return 0;
+}
+#endif
+
+#ifdef CONFIG_PCI
+static int initr_pci(void)
+{
+ pci_init();
+
+ return 0;
+}
+#endif
+
+#ifdef CONFIG_WINBOND_83C553
+static int initr_w83c553f(void)
+{
+ /*
+ * Initialise the ISA bridge
+ */
+ initialise_w83c553f();
+ return 0;
+}
+#endif
+
+static int initr_barrier(void)
+{
+#ifdef CONFIG_PPC
+ /* TODO: Can we not use dmb() macros for this? */
+ asm("sync ; isync");
+#endif
+ return 0;
+}
+
+static int initr_malloc(void)
+{
+ ulong malloc_start;
+
+ /* The malloc area is immediately below the monitor copy in DRAM */
+ malloc_start = gd->relocaddr - TOTAL_MALLOC_LEN;
+ mem_malloc_init((ulong)map_sysmem(malloc_start, TOTAL_MALLOC_LEN),
+ TOTAL_MALLOC_LEN);
+ return 0;
+}
+
+#ifdef CONFIG_DM
+static int initr_dm(void)
+{
+ int ret;
+
+ ret = dm_init();
+ if (ret) {
+ debug("dm_init() failed: %d\n", ret);
+ return ret;
+ }
+ ret = dm_scan_platdata();
+ if (ret) {
+ debug("dm_scan_platdata() failed: %d\n", ret);
+ return ret;
+ }
+#ifdef CONFIG_OF_CONTROL
+ ret = dm_scan_fdt(gd->fdt_blob);
+ if (ret) {
+ debug("dm_scan_fdt() failed: %d\n", ret);
+ return ret;
+ }
+#endif
+
+ return 0;
+}
+#endif
+
+__weak int power_init_board(void)
+{
+ return 0;
+}
+
+static int initr_announce(void)
+{
+ debug("Now running in RAM - U-Boot at: %08lx\n", gd->relocaddr);
+ return 0;
+}
+
+#if !defined(CONFIG_SYS_NO_FLASH)
+static int initr_flash(void)
+{
+ ulong flash_size = 0;
+ bd_t *bd = gd->bd;
+ int ok;
+
+ puts("Flash: ");
+
+ if (board_flash_wp_on()) {
+ printf("Uninitialized - Write Protect On\n");
+ /* Since WP is on, we can't find real size. Set to 0 */
+ ok = 1;
+ } else {
+ flash_size = flash_init();
+ ok = flash_size > 0;
+ }
+ if (!ok) {
+ puts("*** failed ***\n");
+#ifdef CONFIG_PPC
+ /* Why does PPC do this? */
+ hang();
+#endif
+ return -1;
+ }
+ print_size(flash_size, "");
+#ifdef CONFIG_SYS_FLASH_CHECKSUM
+ /*
+ * Compute and print flash CRC if flashchecksum is set to 'y'
+ *
+ * NOTE: Maybe we should add some WATCHDOG_RESET()? XXX
+ */
+ if (getenv_yesno("flashchecksum") == 1) {
+ printf(" CRC: %08X", crc32(0,
+ (const unsigned char *) CONFIG_SYS_FLASH_BASE,
+ flash_size));
+ }
+#endif /* CONFIG_SYS_FLASH_CHECKSUM */
+ putc('\n');
+
+ /* update start of FLASH memory */
+#ifdef CONFIG_SYS_FLASH_BASE
+ bd->bi_flashstart = CONFIG_SYS_FLASH_BASE;
+#endif
+ /* size of FLASH memory (final value) */
+ bd->bi_flashsize = flash_size;
+
+#if defined(CONFIG_SYS_UPDATE_FLASH_SIZE)
+ /* Make a update of the Memctrl. */
+ update_flash_size(flash_size);
+#endif
+
+
+#if defined(CONFIG_OXC) || defined(CONFIG_RMU)
+ /* flash mapped at end of memory map */
+ bd->bi_flashoffset = CONFIG_SYS_TEXT_BASE + flash_size;
+#elif CONFIG_SYS_MONITOR_BASE == CONFIG_SYS_FLASH_BASE
+ bd->bi_flashoffset = monitor_flash_len; /* reserved area for monitor */
+#endif
+ return 0;
+}
+#endif
+
+#ifdef CONFIG_PPC
+static int initr_spi(void)
+{
+ /* PPC does this here */
+#ifdef CONFIG_SPI
+#if !defined(CONFIG_ENV_IS_IN_EEPROM)
+ spi_init_f();
+#endif
+ spi_init_r();
+#endif
+ return 0;
+}
+#endif
+
+#ifdef CONFIG_CMD_NAND
+/* go init the NAND */
+int initr_nand(void)
+{
+ puts("NAND: ");
+ nand_init();
+ return 0;
+}
+#endif
+
+#if defined(CONFIG_CMD_ONENAND)
+/* go init the NAND */
+int initr_onenand(void)
+{
+ puts("NAND: ");
+ onenand_init();
+ return 0;
+}
+#endif
+
+#ifdef CONFIG_GENERIC_MMC
+int initr_mmc(void)
+{
+ puts("MMC: ");
+ mmc_initialize(gd->bd);
+ return 0;
+}
+#endif
+
+#ifdef CONFIG_HAS_DATAFLASH
+int initr_dataflash(void)
+{
+ AT91F_DataflashInit();
+ dataflash_print_info();
+ return 0;
+}
+#endif
+
+/*
+ * Tell if it's OK to load the environment early in boot.
+ *
+ * If CONFIG_OF_CONFIG is defined, we'll check with the FDT to see
+ * if this is OK (defaulting to saying it's OK).
+ *
+ * NOTE: Loading the environment early can be a bad idea if security is
+ * important, since no verification is done on the environment.
+ *
+ * @return 0 if environment should not be loaded, !=0 if it is ok to load
+ */
+static int should_load_env(void)
+{
+#ifdef CONFIG_OF_CONTROL
+ return fdtdec_get_config_int(gd->fdt_blob, "load-environment", 1);
+#elif defined CONFIG_DELAY_ENVIRONMENT
+ return 0;
+#else
+ return 1;
+#endif
+}
+
+static int initr_env(void)
+{
+ /* initialize environment */
+ if (should_load_env())
+ env_relocate();
+ else
+ set_default_env(NULL);
+
+ /* Initialize from environment */
+ load_addr = getenv_ulong("loadaddr", 16, load_addr);
+#if defined(CONFIG_SYS_EXTBDINFO)
+#if defined(CONFIG_405GP) || defined(CONFIG_405EP)
+#if defined(CONFIG_I2CFAST)
+ /*
+ * set bi_iic_fast for linux taking environment variable
+ * "i2cfast" into account
+ */
+ {
+ char *s = getenv("i2cfast");
+
+ if (s && ((*s == 'y') || (*s == 'Y'))) {
+ gd->bd->bi_iic_fast[0] = 1;
+ gd->bd->bi_iic_fast[1] = 1;
+ }
+ }
+#endif /* CONFIG_I2CFAST */
+#endif /* CONFIG_405GP, CONFIG_405EP */
+#endif /* CONFIG_SYS_EXTBDINFO */
+ return 0;
+}
+
+#ifdef CONFIG_HERMES
+static int initr_hermes(void)
+{
+ if ((gd->board_type >> 16) == 2)
+ gd->bd->bi_ethspeed = gd->board_type & 0xFFFF;
+ else
+ gd->bd->bi_ethspeed = 0xFFFF;
+ return 0;
+}
+
+static int initr_hermes_start(void)
+{
+ if (gd->bd->bi_ethspeed != 0xFFFF)
+ hermes_start_lxt980((int) gd->bd->bi_ethspeed);
+ return 0;
+}
+#endif
+
+#ifdef CONFIG_SC3
+/* TODO: with new initcalls, move this into the driver */
+extern void sc3_read_eeprom(void);
+
+static int initr_sc3_read_eeprom(void)
+{
+ sc3_read_eeprom();
+ return 0;
+}
+#endif
+
+static int initr_jumptable(void)
+{
+ jumptable_init();
+ return 0;
+}
+
+#if defined(CONFIG_API)
+static int initr_api(void)
+{
+ /* Initialize API */
+ api_init();
+ return 0;
+}
+#endif
+
+#ifdef CONFIG_DISPLAY_BOARDINFO_LATE
+static int show_model_r(void)
+{
+ /* Put this here so it appears on the LCD, now it is ready */
+# ifdef CONFIG_OF_CONTROL
+ const char *model;
+
+ model = (char *)fdt_getprop(gd->fdt_blob, 0, "model", NULL);
+ printf("Model: %s\n", model ? model : "<unknown>");
+# else
+ checkboard();
+# endif
+ return 0;
+}
+#endif
+
+/* enable exceptions */
+#ifdef CONFIG_ARM
+static int initr_enable_interrupts(void)
+{
+ enable_interrupts();
+ return 0;
+}
+#endif
+
+#ifdef CONFIG_CMD_NET
+static int initr_ethaddr(void)
+{
+ bd_t *bd = gd->bd;
+
+ /* kept around for legacy kernels only ... ignore the next section */
+ eth_getenv_enetaddr("ethaddr", bd->bi_enetaddr);
+#ifdef CONFIG_HAS_ETH1
+ eth_getenv_enetaddr("eth1addr", bd->bi_enet1addr);
+#endif
+#ifdef CONFIG_HAS_ETH2
+ eth_getenv_enetaddr("eth2addr", bd->bi_enet2addr);
+#endif
+#ifdef CONFIG_HAS_ETH3
+ eth_getenv_enetaddr("eth3addr", bd->bi_enet3addr);
+#endif
+#ifdef CONFIG_HAS_ETH4
+ eth_getenv_enetaddr("eth4addr", bd->bi_enet4addr);
+#endif
+#ifdef CONFIG_HAS_ETH5
+ eth_getenv_enetaddr("eth5addr", bd->bi_enet5addr);
+#endif
+ return 0;
+}
+#endif /* CONFIG_CMD_NET */
+
+#ifdef CONFIG_CMD_KGDB
+static int initr_kgdb(void)
+{
+ puts("KGDB: ");
+ kgdb_init();
+ return 0;
+}
+#endif
+
+#if defined(CONFIG_STATUS_LED) && defined(STATUS_LED_BOOT)
+static int initr_status_led(void)
+{
+ status_led_set(STATUS_LED_BOOT, STATUS_LED_BLINKING);
+
+ return 0;
+}
+#endif
+
+#if defined(CONFIG_CMD_SCSI)
+static int initr_scsi(void)
+{
+ /* Not supported properly on ARM yet */
+#ifndef CONFIG_ARM
+ puts("SCSI: ");
+ scsi_init();
+#endif
+
+ return 0;
+}
+#endif /* CONFIG_CMD_NET */
+
+#if defined(CONFIG_CMD_DOC)
+static int initr_doc(void)
+{
+ puts("DOC: ");
+ doc_init();
+}
+#endif
+
+#ifdef CONFIG_BITBANGMII
+static int initr_bbmii(void)
+{
+ bb_miiphy_init();
+ return 0;
+}
+#endif
+
+#ifdef CONFIG_CMD_NET
+static int initr_net(void)
+{
+ puts("Net: ");
+ eth_initialize(gd->bd);
+#if defined(CONFIG_RESET_PHY_R)
+ debug("Reset Ethernet PHY\n");
+ reset_phy();
+#endif
+ return 0;
+}
+#endif
+
+#ifdef CONFIG_POST
+static int initr_post(void)
+{
+ post_run(NULL, POST_RAM | post_bootmode_get(0));
+ return 0;
+}
+#endif
+
+#if defined(CONFIG_CMD_PCMCIA) && !defined(CONFIG_CMD_IDE)
+static int initr_pcmcia(void)
+{
+ puts("PCMCIA:");
+ pcmcia_init();
+ return 0;
+}
+#endif
+
+#if defined(CONFIG_CMD_IDE)
+static int initr_ide(void)
+{
+#ifdef CONFIG_IDE_8xx_PCCARD
+ puts("PCMCIA:");
+#else
+ puts("IDE: ");
+#endif
+#if defined(CONFIG_START_IDE)
+ if (board_start_ide())
+ ide_init();
+#else
+ ide_init();
+#endif
+ return 0;
+}
+#endif
+
+#if defined(CONFIG_PRAM) || defined(CONFIG_LOGBUFFER)
+/*
+ * Export available size of memory for Linux, taking into account the
+ * protected RAM at top of memory
+ */
+int initr_mem(void)
+{
+ ulong pram = 0;
+ char memsz[32];
+
+# ifdef CONFIG_PRAM
+ pram = getenv_ulong("pram", 10, CONFIG_PRAM);
+# endif
+# if defined(CONFIG_LOGBUFFER) && !defined(CONFIG_ALT_LB_ADDR)
+ /* Also take the logbuffer into account (pram is in kB) */
+ pram += (LOGBUFF_LEN + LOGBUFF_OVERHEAD) / 1024;
+# endif
+ sprintf(memsz, "%ldk", (gd->ram_size / 1024) - pram);
+ setenv("mem", memsz);
+
+ return 0;
+}
+#endif
+
+#ifdef CONFIG_CMD_BEDBUG
+static int initr_bedbug(void)
+{
+ bedbug_init();
+
+ return 0;
+}
+#endif
+
+#ifdef CONFIG_PS2KBD
+static int initr_kbd(void)
+{
+ puts("PS/2: ");
+ kbd_init();
+ return 0;
+}
+#endif
+
+#ifdef CONFIG_MODEM_SUPPORT
+static int initr_modem(void)
+{
+ /* TODO: with new initcalls, move this into the driver */
+ extern int do_mdm_init;
+
+ do_mdm_init = gd->do_mdm_init;
+ return 0;
+}
+#endif
+
+static int run_main_loop(void)
+{
+#ifdef CONFIG_SANDBOX
+ sandbox_main_loop_init();
+#endif
+ /* main_loop() can return to retry autoboot, if so just run it again */
+ for (;;)
+ main_loop();
+ return 0;
+}
+
+/*
+ * Over time we hope to remove these functions with code fragments and
+ * stub funtcions, and instead call the relevant function directly.
+ *
+ * We also hope to remove most of the driver-related init and do it if/when
+ * the driver is later used.
+ *
+ * TODO: perhaps reset the watchdog in the initcall function after each call?
+ */
+init_fnc_t init_sequence_r[] = {
+ initr_trace,
+ initr_reloc,
+ /* TODO: could x86/PPC have this also perhaps? */
+#ifdef CONFIG_ARM
+ initr_caches,
+ board_init, /* Setup chipselects */
+#endif
+ /*
+ * TODO: printing of the clock inforamtion of the board is now
+ * implemented as part of bdinfo command. Currently only support for
+ * davinci SOC's is added. Remove this check once all the board
+ * implement this.
+ */
+#ifdef CONFIG_CLOCKS
+ set_cpu_clk_info, /* Setup clock information */
+#endif
+ initr_reloc_global_data,
+ initr_serial,
+ initr_announce,
+ INIT_FUNC_WATCHDOG_RESET
+#ifdef CONFIG_PPC
+ initr_trap,
+#endif
+#ifdef CONFIG_ADDR_MAP
+ initr_addr_map,
+#endif
+#if defined(CONFIG_BOARD_EARLY_INIT_R)
+ board_early_init_r,
+#endif
+ INIT_FUNC_WATCHDOG_RESET
+#ifdef CONFIG_LOGBUFFER
+ initr_logbuffer,
+#endif
+#ifdef CONFIG_POST
+ initr_post_backlog,
+#endif
+ INIT_FUNC_WATCHDOG_RESET
+#ifdef CONFIG_SYS_DELAYED_ICACHE
+ initr_icache_enable,
+#endif
+#if defined(CONFIG_SYS_INIT_RAM_LOCK) && defined(CONFIG_E500)
+ initr_unlock_ram_in_cache,
+#endif
+#if defined(CONFIG_PCI) && defined(CONFIG_SYS_EARLY_PCI_INIT)
+ /*
+ * Do early PCI configuration _before_ the flash gets initialised,
+ * because PCU ressources are crucial for flash access on some boards.
+ */
+ initr_pci,
+#endif
+#ifdef CONFIG_WINBOND_83C553
+ initr_w83c553f,
+#endif
+ initr_barrier,
+ initr_malloc,
+ bootstage_relocate,
+#ifdef CONFIG_DM
+ initr_dm,
+#endif
+#ifdef CONFIG_ARCH_EARLY_INIT_R
+ arch_early_init_r,
+#endif
+ power_init_board,
+#ifndef CONFIG_SYS_NO_FLASH
+ initr_flash,
+#endif
+ INIT_FUNC_WATCHDOG_RESET
+#if defined(CONFIG_PPC) || defined(CONFIG_X86)
+ /* initialize higher level parts of CPU like time base and timers */
+ cpu_init_r,
+#endif
+#ifdef CONFIG_PPC
+ initr_spi,
+#endif
+#if defined(CONFIG_X86) && defined(CONFIG_SPI)
+ init_func_spi,
+#endif
+#ifdef CONFIG_CMD_NAND
+ initr_nand,
+#endif
+#ifdef CONFIG_CMD_ONENAND
+ initr_onenand,
+#endif
+#ifdef CONFIG_GENERIC_MMC
+ initr_mmc,
+#endif
+#ifdef CONFIG_HAS_DATAFLASH
+ initr_dataflash,
+#endif
+ initr_env,
+ INIT_FUNC_WATCHDOG_RESET
+ initr_secondary_cpu,
+#ifdef CONFIG_SC3
+ initr_sc3_read_eeprom,
+#endif
+#ifdef CONFIG_HERMES
+ initr_hermes,
+#endif
+#if defined(CONFIG_ID_EEPROM) || defined(CONFIG_SYS_I2C_MAC_OFFSET)
+ mac_read_from_eeprom,
+#endif
+ INIT_FUNC_WATCHDOG_RESET
+#if defined(CONFIG_PCI) && !defined(CONFIG_SYS_EARLY_PCI_INIT)
+ /*
+ * Do pci configuration
+ */
+ initr_pci,
+#endif
+ stdio_init,
+ initr_jumptable,
+#ifdef CONFIG_API
+ initr_api,
+#endif
+ console_init_r, /* fully init console as a device */
+#ifdef CONFIG_DISPLAY_BOARDINFO_LATE
+ show_model_r,
+#endif
+#ifdef CONFIG_ARCH_MISC_INIT
+ arch_misc_init, /* miscellaneous arch-dependent init */
+#endif
+#ifdef CONFIG_MISC_INIT_R
+ misc_init_r, /* miscellaneous platform-dependent init */
+#endif
+#ifdef CONFIG_HERMES
+ initr_hermes_start,
+#endif
+ INIT_FUNC_WATCHDOG_RESET
+#ifdef CONFIG_CMD_KGDB
+ initr_kgdb,
+#endif
+#ifdef CONFIG_X86
+ board_early_init_r,
+#endif
+ interrupt_init,
+#if defined(CONFIG_ARM) || defined(CONFIG_x86)
+ initr_enable_interrupts,
+#endif
+#ifdef CONFIG_X86
+ timer_init, /* initialize timer */
+#endif
+#if defined(CONFIG_STATUS_LED) && defined(STATUS_LED_BOOT)
+ initr_status_led,
+#endif
+ /* PPC has a udelay(20) here dating from 2002. Why? */
+#ifdef CONFIG_CMD_NET
+ initr_ethaddr,
+#endif
+#ifdef CONFIG_BOARD_LATE_INIT
+ board_late_init,
+#endif
+#ifdef CONFIG_CMD_SCSI
+ INIT_FUNC_WATCHDOG_RESET
+ initr_scsi,
+#endif
+#ifdef CONFIG_CMD_DOC
+ INIT_FUNC_WATCHDOG_RESET
+ initr_doc,
+#endif
+#ifdef CONFIG_BITBANGMII
+ initr_bbmii,
+#endif
+#ifdef CONFIG_CMD_NET
+ INIT_FUNC_WATCHDOG_RESET
+ initr_net,
+#endif
+#ifdef CONFIG_POST
+ initr_post,
+#endif
+#if defined(CONFIG_CMD_PCMCIA) && !defined(CONFIG_CMD_IDE)
+ initr_pcmcia,
+#endif
+#if defined(CONFIG_CMD_IDE)
+ initr_ide,
+#endif
+#ifdef CONFIG_LAST_STAGE_INIT
+ INIT_FUNC_WATCHDOG_RESET
+ /*
+ * Some parts can be only initialized if all others (like
+ * Interrupts) are up and running (i.e. the PC-style ISA
+ * keyboard).
+ */
+ last_stage_init,
+#endif
+#ifdef CONFIG_CMD_BEDBUG
+ INIT_FUNC_WATCHDOG_RESET
+ initr_bedbug,
+#endif
+#if defined(CONFIG_PRAM) || defined(CONFIG_LOGBUFFER)
+ initr_mem,
+#endif
+#ifdef CONFIG_PS2KBD
+ initr_kbd,
+#endif
+#ifdef CONFIG_MODEM_SUPPORT
+ initr_modem,
+#endif
+ run_main_loop,
+};
+
+void board_init_r(gd_t *new_gd, ulong dest_addr)
+{
+#ifdef CONFIG_NEEDS_MANUAL_RELOC
+ int i;
+#endif
+
+#ifndef CONFIG_X86
+ gd = new_gd;
+#endif
+
+#ifdef CONFIG_NEEDS_MANUAL_RELOC
+ for (i = 0; i < ARRAY_SIZE(init_sequence_r); i++)
+ init_sequence_r[i] += gd->reloc_off;
+#endif
+
+ if (initcall_run_list(init_sequence_r))
+ hang();
+
+ /* NOTREACHED - run_main_loop() does not return */
+ hang();
+}
Code Review / kvmfornfv.git / blobdiff