Add qemu 2.4.0

[kvmfornfv.git] / qemu / roms / u-boot / board / w7o / vpd.h

diff --git a/qemu/roms/u-boot/board/w7o/vpd.h b/qemu/roms/u-boot/board/w7o/vpd.h
new file mode 100644 (file)
index 0000000..2395b18
--- /dev/null
+++ b/qemu/roms/u-boot/board/w7o/vpd.h
@@ -0,0 +1,118 @@
+/*
+ * (C) Copyright 2001
+ * Erik Theisen, Wave 7 Optics, etheisen@mindspring.com.
+ *
+ * SPDX-License-Identifier:    GPL-2.0+
+ */
+
+#ifndef _VPD_H_
+#define _VPD_H_
+
+/*
+ * Main Flash Configuration.
+ */
+typedef struct flashCfg_s {
+    unsigned short mfg;                                /* Manufacture ID */
+    unsigned short dev;                                /* Device ID */
+    unsigned char devWidth;                    /* Device Width */
+    unsigned char numDevs;                     /* Number of devices */
+    unsigned char numCols;                     /* Number of columns */
+    unsigned char colWidth;                    /* Width of a column */
+    unsigned char weDataWidth;                 /* Write/Erase Data Width */
+} flashCfg_t;
+
+/*
+ * Vital Product Data - VPD
+ */
+#define MAX_PROD_ID            15
+#define MAX_ETH_ADDRS          10
+typedef unsigned char EthAddr[6];
+typedef struct vpd {
+    unsigned char _devAddr;                    /* Device address during read */
+    char productId[MAX_PROD_ID];               /* Product ID */
+    char revisionId;                           /* Revision ID as a char */
+    unsigned long serialNum;                   /* Serial number */
+    unsigned char  manuID;                     /* Manufact ID - byte int */
+    unsigned long configOpt;                   /* Config Option - bit field */
+    unsigned long sysClk;                      /* System clock in Hertz */
+    unsigned long serClk;                      /* Ext. clock in Hertz */
+    flashCfg_t flashCfg;                       /* Flash configuration */
+    unsigned long numPOTS;                     /* Number of POTS lines */
+    unsigned long numDS1;                      /* Number of DS1 circuits */
+    EthAddr ethAddrs[MAX_ETH_ADDRS];           /* Ethernet MAC, 1st = craft */
+} VPD;
+
+
+#define VPD_MAX_EEPROM_SIZE    512             /* Max size VPD EEPROM */
+#define SDRAM_SPD_DATA_SIZE    128             /* Size SPD in VPD EEPROM */
+
+/*
+ * PIDs - Packet Identifiers
+ */
+#define VPD_PID_GI             0x0             /* Guaranted Illegal */
+#define VPD_PID_PID            0x1             /* Product Identifier */
+#define VPD_PID_REV            0x2             /* Product Revision */
+#define VPD_PID_SN             0x3             /* Serial Number */
+#define VPD_PID_MANID          0x4             /* Manufacture ID */
+#define VPD_PID_PCO            0x5             /* Product configuration */
+#define VPD_PID_SYSCLK         0x6             /* System Clock */
+#define VPD_PID_SERCLK         0x7             /* Ser. Clk. Speed in Hertz */
+#define VPD_PID_CRC            0x8             /* VPD CRC */
+#define VPD_PID_FLASH          0x9             /* Flash Configuration */
+#define VPD_PID_ETHADDR                0xA             /* Ethernet Address(es) */
+#define VPD_PID_GAL            0xB             /* Galileo Switch Config */
+#define VPD_PID_POTS           0xC             /* Number of POTS Lines */
+#define VPD_PID_DS1            0xD             /* Number of DS1s */
+#define VPD_PID_TERM           0xFF            /* Termination packet */
+
+/*
+ * VPD - Eyecatcher/Magic
+ */
+#define VPD_EYECATCHER         "W7O"
+#define VPD_EYE_SIZE           3
+typedef struct vpd_header {
+    unsigned char eyecatcher[VPD_EYE_SIZE];    /* eyecatcher - "W7O" */
+    unsigned short size __attribute__((packed)); /* size of EEPROM */
+} vpd_header_t;
+
+
+#define VPD_DATA_SIZE (VPD_MAX_EEPROM_SIZE - SDRAM_SPD_DATA_SIZE - \
+                       sizeof(vpd_header_t))
+typedef struct vpd_s {
+    vpd_header_t header;
+    unsigned char packets[VPD_DATA_SIZE];
+} vpd_t;
+
+typedef struct vpd_packet {
+    unsigned char identifier;
+    unsigned char size;
+    unsigned char data[1];
+} vpd_packet_t;
+
+/*
+ * VPD configOpt bit mask
+ */
+#define VPD_HAS_BBRAM          0x1             /* Battery backed SRAM */
+#define VPD_HAS_RTC            0x2             /* Battery backed RTC */
+#define VPD_HAS_EXT_SER_CLK    0x4             /* External serial clock */
+#define VPD_HAS_SER_TRANS_1    0x8             /* COM1 transceiver */
+#define VPD_HAS_SER_TRANS_2    0x10            /* COM2 transceiver */
+#define VPD_HAS_CRAFT_PHY      0x20            /* CRAFT Ethernet */
+#define VPD_HAS_DTT_1          0x40            /* I2C Digital therm. #1 */
+#define VPD_HAS_DTT_2          0x80            /* I2C Digital therm. #2 */
+#define VPD_HAS_1000_UP_LASER  0x100           /* GMM - 1000Mbit Uplink */
+#define VPD_HAS_70KM_UP_LASER  0x200           /* CMM - 70KM Uplink laser */
+#define VPD_HAS_2_UPLINKS      0x400           /* CMM - 2 uplink lasers */
+#define VPD_HAS_FPGA           0x800           /* Has 1 or more FPGAs */
+#define VPD_HAS_DFA            0x1000          /* CLM - Has 2 Fiber Inter. */
+#define VPD_HAS_GAL_SWITCH     0x2000          /* GMM - Has a Gal switch */
+#define VPD_HAS_POTS_LINES     0x4000          /* GMM - Has POTS lines */
+#define VPD_HAS_DS1_CHANNELS   0x8000          /* GMM - Has DS1 channels */
+#define VPD_HAS_CABLE_RETURN   0x10000         /* GBM/GBR - Cable ret. path */
+
+#define VPD_EEPROM_SIZE         (256 - SDRAM_SPD_DATA_SIZE) /* Size EEPROM */
+
+extern int vpd_get_data(unsigned char dev_addr, VPD *vpd);
+extern void vpd_print(VPD *vpdInfo);
+
+#endif /* _VPD_H_ */