Add qemu 2.4.0
[kvmfornfv.git] / qemu / roms / u-boot / board / tqc / tqm8272 / nand.c
diff --git a/qemu/roms/u-boot/board/tqc/tqm8272/nand.c b/qemu/roms/u-boot/board/tqc/tqm8272/nand.c
new file mode 100644 (file)
index 0000000..4925b8d
--- /dev/null
@@ -0,0 +1,260 @@
+/*
+ * (C) Copyright 2008
+ * Heiko Schocher, DENX Software Engineering, hs@denx.de.
+ *
+ * SPDX-License-Identifier:    GPL-2.0+
+ */
+
+#include <common.h>
+#include <ioports.h>
+#include <mpc8260.h>
+
+#include "tqm8272.h"
+
+/* UPM pattern for bus clock = 66.7 MHz */
+static const uint upmTable67[] =
+{
+    /* Offset  UPM Read Single RAM array entry -> NAND Read Data */
+    /* 0x00 */ 0x0fa3f100, 0x0fa3b000, 0x0fa33100, 0x0fa33000,
+    /* 0x04 */ 0x0fa33000, 0x0fa33004, 0xfffffc01, 0xfffffc00,
+
+               /* UPM Read Burst RAM array entry -> unused */
+    /* 0x08 */ 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc00,
+    /* 0x0C */ 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc00,
+
+               /* UPM Read Burst RAM array entry -> unused */
+    /* 0x10 */ 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc00,
+    /* 0x14 */ 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc00,
+
+               /* UPM Write Single RAM array entry -> NAND Write Data, ADDR and CMD */
+    /* 0x18 */ 0x00a3fc00, 0x00a3fc00, 0x00a3fc00, 0x00a3fc00,
+    /* 0x1C */ 0x0fa3fc00, 0x0fa3fc04, 0xfffffc01, 0xfffffc00,
+
+               /* UPM Write Burst RAM array entry -> unused */
+    /* 0x20 */ 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc00,
+    /* 0x24 */ 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc00,
+    /* 0x28 */ 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc00,
+    /* 0x2C */ 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc01,
+
+               /* UPM Refresh Timer RAM array entry -> unused */
+    /* 0x30 */ 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc00,
+    /* 0x34 */ 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc00,
+    /* 0x38 */ 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc01,
+
+               /* UPM Exception RAM array entry -> unsused */
+    /* 0x3C */ 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc01,
+};
+
+/* UPM pattern for bus clock = 100 MHz */
+static const uint upmTable100[] =
+{
+    /* Offset  UPM Read Single RAM array entry -> NAND Read Data */
+    /* 0x00 */ 0x0fa3f200, 0x0fa3b000, 0x0fa33300, 0x0fa33000,
+    /* 0x04 */ 0x0fa33000, 0x0fa33004, 0xfffffc01, 0xfffffc00,
+
+               /* UPM Read Burst RAM array entry -> unused */
+    /* 0x08 */ 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc00,
+    /* 0x0C */ 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc00,
+
+               /* UPM Read Burst RAM array entry -> unused */
+    /* 0x10 */ 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc00,
+    /* 0x14 */ 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc00,
+
+               /* UPM Write Single RAM array entry -> NAND Write Data, ADDR and CMD */
+    /* 0x18 */ 0x00a3ff00, 0x00a3fc00, 0x00a3fc00, 0x0fa3fc00,
+    /* 0x1C */ 0x0fa3fc00, 0x0fa3fc04, 0xfffffc01, 0xfffffc00,
+
+               /* UPM Write Burst RAM array entry -> unused */
+    /* 0x20 */ 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc00,
+    /* 0x24 */ 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc00,
+    /* 0x28 */ 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc00,
+    /* 0x2C */ 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc01,
+
+               /* UPM Refresh Timer RAM array entry -> unused */
+    /* 0x30 */ 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc00,
+    /* 0x34 */ 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc00,
+    /* 0x38 */ 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc01,
+
+               /* UPM Exception RAM array entry -> unsused */
+    /* 0x3C */ 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc01,
+};
+
+/* UPM pattern for bus clock = 133.3 MHz */
+static const uint upmTable133[] =
+{
+    /* Offset  UPM Read Single RAM array entry -> NAND Read Data */
+    /* 0x00 */ 0x0fa3f300, 0x0fa3b000, 0x0fa33300, 0x0fa33000,
+    /* 0x04 */ 0x0fa33200, 0x0fa33004, 0xfffffc01, 0xfffffc00,
+
+               /* UPM Read Burst RAM array entry -> unused */
+    /* 0x08 */ 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc00,
+    /* 0x0C */ 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc00,
+
+               /* UPM Read Burst RAM array entry -> unused */
+    /* 0x10 */ 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc00,
+    /* 0x14 */ 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc00,
+
+               /* UPM Write Single RAM array entry -> NAND Write Data, ADDR and CMD */
+    /* 0x18 */ 0x00a3ff00, 0x00a3fc00, 0x00a3fd00, 0x0fa3fc00,
+    /* 0x1C */ 0x0fa3fd00, 0x0fa3fc04, 0xfffffc01, 0xfffffc00,
+
+               /* UPM Write Burst RAM array entry -> unused */
+    /* 0x20 */ 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc00,
+    /* 0x24 */ 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc00,
+    /* 0x28 */ 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc00,
+    /* 0x2C */ 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc01,
+
+               /* UPM Refresh Timer RAM array entry -> unused */
+    /* 0x30 */ 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc00,
+    /* 0x34 */ 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc00,
+    /* 0x38 */ 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc01,
+
+               /* UPM Exception RAM array entry -> unsused */
+    /* 0x3C */ 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc01,
+};
+
+static int     chipsel = 0;
+
+#if defined(CONFIG_CMD_NAND)
+
+#include <nand.h>
+#include <linux/mtd/mtd.h>
+
+static u8 hwctl = 0;
+
+static void upmnand_write_byte(struct mtd_info *mtdinfo, u_char byte)
+{
+       struct nand_chip *this = mtdinfo->priv;
+       ulong base = (ulong) (this->IO_ADDR_W + chipsel * CONFIG_SYS_NAND_CS_DIST);
+
+       if (hwctl & 0x1) {
+               WRITE_NAND_UPM(byte, base, CONFIG_SYS_NAND_UPM_WRITE_CMD_OFS);
+       } else if (hwctl & 0x2) {
+               WRITE_NAND_UPM(byte, base, CONFIG_SYS_NAND_UPM_WRITE_ADDR_OFS);
+       } else {
+               WRITE_NAND(byte, base);
+       }
+}
+
+static void upmnand_hwcontrol(struct mtd_info *mtd, int cmd, unsigned int ctrl)
+{
+       if (ctrl & NAND_CTRL_CHANGE) {
+               if ( ctrl & NAND_CLE )
+                       hwctl |= 0x1;
+               else
+                       hwctl &= ~0x1;
+               if ( ctrl & NAND_ALE )
+                       hwctl |= 0x2;
+               else
+                       hwctl &= ~0x2;
+       }
+       if (cmd != NAND_CMD_NONE)
+               upmnand_write_byte (mtd, cmd);
+}
+
+static u_char upmnand_read_byte(struct mtd_info *mtdinfo)
+{
+       struct nand_chip *this = mtdinfo->priv;
+       ulong base = (ulong) (this->IO_ADDR_W + chipsel * CONFIG_SYS_NAND_CS_DIST);
+
+       return READ_NAND(base);
+}
+
+static int tqm8272_dev_ready(struct mtd_info *mtdinfo)
+{
+       /* constant delay (see also tR in the datasheet) */
+       udelay(12); \
+       return 1;
+}
+
+#ifndef CONFIG_NAND_SPL
+static void tqm8272_read_buf(struct mtd_info *mtdinfo, uint8_t *buf, int len)
+{
+       struct nand_chip *this = mtdinfo->priv;
+       unsigned char *base = (unsigned char *) (this->IO_ADDR_W + chipsel * CONFIG_SYS_NAND_CS_DIST);
+       int     i;
+
+       for (i = 0; i< len; i++)
+               buf[i] = *base;
+}
+
+static void tqm8272_write_buf(struct mtd_info *mtdinfo, const uint8_t *buf, int len)
+{
+       struct nand_chip *this = mtdinfo->priv;
+       unsigned char *base = (unsigned char *) (this->IO_ADDR_W + chipsel * CONFIG_SYS_NAND_CS_DIST);
+       int     i;
+
+       for (i = 0; i< len; i++)
+               *base = buf[i];
+}
+
+static int tqm8272_verify_buf(struct mtd_info *mtdinfo, const uint8_t *buf, int len)
+{
+       struct nand_chip *this = mtdinfo->priv;
+       unsigned char *base = (unsigned char *) (this->IO_ADDR_W + chipsel * CONFIG_SYS_NAND_CS_DIST);
+       int     i;
+
+       for (i = 0; i < len; i++)
+               if (buf[i] != *base)
+                       return -1;
+       return 0;
+}
+#endif /* #ifndef CONFIG_NAND_SPL */
+
+void board_nand_select_device(struct nand_chip *nand, int chip)
+{
+       chipsel = chip;
+}
+
+int board_nand_init(struct nand_chip *nand)
+{
+       static  int     UpmInit = 0;
+       volatile immap_t * immr = (immap_t *)CONFIG_SYS_IMMR;
+       volatile memctl8260_t *memctl = &immr->im_memctl;
+
+       if (hwinf.nand == 0) return -1;
+
+       /* Setup the UPM */
+       if (UpmInit == 0) {
+               switch (hwinf.busclk_real) {
+               case 100000000:
+                       upmconfig (UPMB, (uint *) upmTable100,
+                          sizeof (upmTable100) / sizeof (uint));
+                       break;
+               case 133333333:
+                       upmconfig (UPMB, (uint *) upmTable133,
+                          sizeof (upmTable133) / sizeof (uint));
+                       break;
+               default:
+                       upmconfig (UPMB, (uint *) upmTable67,
+                          sizeof (upmTable67) / sizeof (uint));
+                       break;
+               }
+               UpmInit = 1;
+       }
+
+       /* Setup the memctrl */
+       memctl->memc_or3 = CONFIG_SYS_NAND_OR;
+       memctl->memc_br3 = CONFIG_SYS_NAND_BR;
+       memctl->memc_mbmr = (MxMR_OP_NORM);
+
+       nand->ecc.mode = NAND_ECC_SOFT;
+
+       nand->cmd_ctrl   = upmnand_hwcontrol;
+       nand->read_byte  = upmnand_read_byte;
+       nand->dev_ready  = tqm8272_dev_ready;
+
+#ifndef CONFIG_NAND_SPL
+       nand->write_buf  = tqm8272_write_buf;
+       nand->read_buf   = tqm8272_read_buf;
+       nand->verify_buf = tqm8272_verify_buf;
+#endif
+
+       /*
+        * Select required NAND chip
+        */
+       board_nand_select_device(nand, 0);
+       return 0;
+}
+
+#endif