Add qemu 2.4.0

[kvmfornfv.git] / qemu / roms / u-boot / board / timll / devkit8000 / devkit8000.c

diff --git a/qemu/roms/u-boot/board/timll/devkit8000/devkit8000.c b/qemu/roms/u-boot/board/timll/devkit8000/devkit8000.c
new file mode 100644 (file)
index 0000000..bcbee73
--- /dev/null
+++ b/qemu/roms/u-boot/board/timll/devkit8000/devkit8000.c
@@ -0,0 +1,185 @@
+/*
+ * (C) Copyright 2004-2008
+ * Texas Instruments, <www.ti.com>
+ *
+ * Author :
+ *     Sunil Kumar <sunilsaini05@gmail.com>
+ *     Shashi Ranjan <shashiranjanmca05@gmail.com>
+ *
+ * (C) Copyright 2009
+ * Frederik Kriewitz <frederik@kriewitz.eu>
+ *
+ * Derived from Beagle Board and 3430 SDP code by
+ *     Richard Woodruff <r-woodruff2@ti.com>
+ *     Syed Mohammed Khasim <khasim@ti.com>
+ *
+ *
+ * SPDX-License-Identifier:    GPL-2.0+
+ */
+#include <common.h>
+#include <twl4030.h>
+#include <asm/io.h>
+#include <asm/arch/mmc_host_def.h>
+#include <asm/arch/mux.h>
+#include <asm/arch/sys_proto.h>
+#include <asm/arch/mem.h>
+#include <asm/mach-types.h>
+#include "devkit8000.h"
+#include <asm/gpio.h>
+#ifdef CONFIG_DRIVER_DM9000
+#include <net.h>
+#include <netdev.h>
+#endif
+
+DECLARE_GLOBAL_DATA_PTR;
+
+static u32 gpmc_net_config[GPMC_MAX_REG] = {
+       NET_GPMC_CONFIG1,
+       NET_GPMC_CONFIG2,
+       NET_GPMC_CONFIG3,
+       NET_GPMC_CONFIG4,
+       NET_GPMC_CONFIG5,
+       NET_GPMC_CONFIG6,
+       0
+};
+
+/*
+ * Routine: board_init
+ * Description: Early hardware init.
+ */
+int board_init(void)
+{
+       gpmc_init(); /* in SRAM or SDRAM, finish GPMC */
+       /* board id for Linux */
+       gd->bd->bi_arch_number = MACH_TYPE_DEVKIT8000;
+       /* boot param addr */
+       gd->bd->bi_boot_params = (OMAP34XX_SDRC_CS0 + 0x100);
+
+       return 0;
+}
+
+/* Configure GPMC registers for DM9000 */
+static void gpmc_dm9000_config(void)
+{
+       enable_gpmc_cs_config(gpmc_net_config, &gpmc_cfg->cs[6],
+               CONFIG_DM9000_BASE, GPMC_SIZE_16M);
+}
+
+/*
+ * Routine: misc_init_r
+ * Description: Configure board specific parts
+ */
+int misc_init_r(void)
+{
+       struct ctrl_id *id_base = (struct ctrl_id *)OMAP34XX_ID_L4_IO_BASE;
+#ifdef CONFIG_DRIVER_DM9000
+       uchar enetaddr[6];
+       u32 die_id_0;
+#endif
+
+       twl4030_power_init();
+#ifdef CONFIG_TWL4030_LED
+       twl4030_led_init(TWL4030_LED_LEDEN_LEDAON | TWL4030_LED_LEDEN_LEDBON);
+#endif
+
+#ifdef CONFIG_DRIVER_DM9000
+       /* Configure GPMC registers for DM9000 */
+       enable_gpmc_cs_config(gpmc_net_config, &gpmc_cfg->cs[6],
+                       CONFIG_DM9000_BASE, GPMC_SIZE_16M);
+
+       /* Use OMAP DIE_ID as MAC address */
+       if (!eth_getenv_enetaddr("ethaddr", enetaddr)) {
+               printf("ethaddr not set, using Die ID\n");
+               die_id_0 = readl(&id_base->die_id_0);
+               enetaddr[0] = 0x02; /* locally administered */
+               enetaddr[1] = readl(&id_base->die_id_1) & 0xff;
+               enetaddr[2] = (die_id_0 & 0xff000000) >> 24;
+               enetaddr[3] = (die_id_0 & 0x00ff0000) >> 16;
+               enetaddr[4] = (die_id_0 & 0x0000ff00) >> 8;
+               enetaddr[5] = (die_id_0 & 0x000000ff);
+               eth_setenv_enetaddr("ethaddr", enetaddr);
+       }
+#endif
+
+       dieid_num_r();
+
+       return 0;
+}
+
+/*
+ * Routine: set_muxconf_regs
+ * Description: Setting up the configuration Mux registers specific to the
+ *             hardware. Many pins need to be moved from protect to primary
+ *             mode.
+ */
+void set_muxconf_regs(void)
+{
+       MUX_DEVKIT8000();
+}
+
+#if defined(CONFIG_GENERIC_MMC) && !defined(CONFIG_SPL_BUILD)
+int board_mmc_init(bd_t *bis)
+{
+       return omap_mmc_init(0, 0, 0, -1, -1);
+}
+#endif
+
+#if defined(CONFIG_DRIVER_DM9000) & !defined(CONFIG_SPL_BUILD)
+/*
+ * Routine: board_eth_init
+ * Description: Setting up the Ethernet hardware.
+ */
+int board_eth_init(bd_t *bis)
+{
+       return dm9000_initialize(bis);
+}
+#endif
+
+#ifdef CONFIG_SPL_OS_BOOT
+/*
+ * Do board specific preperation before SPL
+ * Linux boot
+ */
+void spl_board_prepare_for_linux(void)
+{
+       gpmc_dm9000_config();
+}
+
+/*
+ * devkit8000 specific implementation of spl_start_uboot()
+ *
+ * RETURN
+ * 0 if the button is not pressed
+ * 1 if the button is pressed
+ */
+int spl_start_uboot(void)
+{
+       int val = 0;
+       if (!gpio_request(SPL_OS_BOOT_KEY, "U-Boot key")) {
+               gpio_direction_input(SPL_OS_BOOT_KEY);
+               val = gpio_get_value(SPL_OS_BOOT_KEY);
+               gpio_free(SPL_OS_BOOT_KEY);
+       }
+       return !val;
+}
+#endif
+
+/*
+ * Routine: get_board_mem_timings
+ * Description: If we use SPL then there is no x-loader nor config header
+ * so we have to setup the DDR timings ourself on the first bank.  This
+ * provides the timing values back to the function that configures
+ * the memory.  We have either one or two banks of 128MB DDR.
+ */
+void get_board_mem_timings(struct board_sdrc_timings *timings)
+{
+       /* General SDRC config */
+       timings->mcfg = MICRON_V_MCFG_165(128 << 20);
+       timings->rfr_ctrl = SDP_3430_SDRC_RFR_CTRL_165MHz;
+
+       /* AC timings */
+       timings->ctrla = MICRON_V_ACTIMA_165;
+       timings->ctrlb = MICRON_V_ACTIMB_165;
+
+       timings->mr = MICRON_V_MR_165;
+}