Add qemu 2.4.0
[kvmfornfv.git] / qemu / roms / u-boot / board / spc1920 / hpi.c
diff --git a/qemu/roms/u-boot/board/spc1920/hpi.c b/qemu/roms/u-boot/board/spc1920/hpi.c
new file mode 100644 (file)
index 0000000..c593837
--- /dev/null
@@ -0,0 +1,596 @@
+/*
+ * (C) Copyright 2006
+ * Markus Klotzbuecher, DENX Software Engineering, mk@denx.de.
+ *
+ * SPDX-License-Identifier:    GPL-2.0+
+ */
+
+/*
+ * Host Port Interface (HPI)
+ */
+
+/* debug levels:
+ *  0 : errors
+ *  1 : usefull info
+ *  2 : lots of info
+ *  3 : noisy
+ */
+
+#define DEBUG 0
+
+#include <config.h>
+#include <common.h>
+#include <mpc8xx.h>
+
+#include "pld.h"
+#include "hpi.h"
+
+#define        _NOT_USED_      0xFFFFFFFF
+
+/* original table:
+ * - inserted loops to achieve long CS low and high Periods (~217ns)
+ * - move cs high 2/4 to the right
+ */
+const uint dsp_table_slow[] =
+{
+       /* single read   (offset  0x00 in upm ram) */
+       0x8fffdc04, 0x0fffdc84, 0x0fffdc84, 0x0fffdc00,
+       0x3fffdc04, 0xffffdc84, 0xffffdc84, 0xffffdc05,
+
+       /* burst read    (offset 0x08 in upm ram) */
+       _NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_,
+       _NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_,
+       _NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_,
+       _NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_,
+
+       /* single write  (offset 0x18 in upm ram) */
+       0x8fffd004, 0x0fffd084, 0x0fffd084, 0x3fffd000,
+       0xffffd084, 0xffffd084, 0xffffd005, _NOT_USED_,
+
+       /* burst write   (offset 0x20 in upm ram) */
+       _NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_,
+       _NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_,
+       _NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_,
+       _NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_,
+       /* refresh       (offset 0x30 in upm ram) */
+       _NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_,
+       _NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_,
+       _NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_,
+       /* exception     (offset 0x3C in upm ram) */
+       _NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_,
+};
+
+/* dsp hpi upm ram table
+ * works fine for noninc access, failes on incremental.
+ * - removed first word
+ */
+const uint dsp_table_fast[] =
+{
+       /* single read   (offset  0x00 in upm ram) */
+       0x8fffdc04, 0x0fffdc04, 0x0fffdc00, 0x3fffdc04,
+       0xffffdc05, _NOT_USED_, _NOT_USED_, _NOT_USED_,
+
+       /* burst read    (offset 0x08 in upm ram) */
+       _NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_,
+       _NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_,
+       _NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_,
+       _NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_,
+
+       /* single write  (offset 0x18 in upm ram) */
+       0x8fffd004, 0x0fffd004, 0x3fffd000, 0xffffd005,
+       _NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_,
+
+       /* burst write   (offset 0x20 in upm ram) */
+       _NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_,
+       _NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_,
+       _NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_,
+       _NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_,
+       /* refresh       (offset 0x30 in upm ram) */
+       _NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_,
+       _NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_,
+       _NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_,
+       /* exception     (offset 0x3C in upm ram) */
+       _NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_,
+};
+
+
+#ifdef CONFIG_SPC1920_HPI_TEST
+#undef HPI_TEST_OSZI
+
+#define HPI_TEST_CHUNKSIZE     0x1000
+#define HPI_TEST_PATTERN       0x00000000
+#define HPI_TEST_START         0x0
+#define HPI_TEST_END           0x30000
+
+#define TINY_AUTOINC_DATA_SIZE 16 /* 32bit words */
+#define TINY_AUTOINC_BASE_ADDR 0x0
+
+static int hpi_activate(void);
+#if 0
+static void hpi_inactivate(void);
+#endif
+static void dsp_reset(void);
+
+static int hpi_write_inc(u32 addr, u32 *data, u32 count);
+static int hpi_read_inc(u32 addr, u32 *buf, u32 count);
+static int hpi_write_noinc(u32 addr, u32 data);
+static u32 hpi_read_noinc(u32 addr);
+
+int hpi_test(void);
+static int hpi_write_addr_test(u32 addr);
+static int hpi_read_write_test(u32 addr, u32 data);
+#ifdef DO_TINY_TEST
+static int hpi_tiny_autoinc_test(void);
+#endif /* DO_TINY_TEST */
+#endif /* CONFIG_SPC1920_HPI_TEST */
+
+
+/* init the host port interface on UPMA */
+int hpi_init(void)
+{
+       volatile immap_t *immr = (immap_t *) CONFIG_SYS_IMMR;
+       volatile memctl8xx_t *memctl = &immr->im_memctl;
+       volatile spc1920_pld_t *pld = (spc1920_pld_t *) CONFIG_SYS_SPC1920_PLD_BASE;
+
+       upmconfig(UPMA, (uint *)dsp_table_slow, sizeof(dsp_table_slow)/sizeof(uint));
+       udelay(100);
+
+       memctl->memc_mamr = CONFIG_SYS_MAMR;
+       memctl->memc_or3 = CONFIG_SYS_OR3;
+       memctl->memc_br3 = CONFIG_SYS_BR3;
+
+       /* reset dsp */
+       dsp_reset();
+
+       /* activate hpi switch*/
+       pld->dsp_hpi_on = 0x1;
+
+       udelay(100);
+
+       return 0;
+}
+
+#ifdef CONFIG_SPC1920_HPI_TEST
+/* activate the Host Port interface */
+static int hpi_activate(void)
+{
+       volatile spc1920_pld_t *pld = (spc1920_pld_t *) CONFIG_SYS_SPC1920_PLD_BASE;
+
+       /* turn on hpi */
+       pld->dsp_hpi_on = 0x1;
+
+       udelay(5);
+
+       /* turn on the power EN_DSP_POWER high*/
+       /* currently always on TBD */
+
+       /* setup hpi control register */
+       HPI_HPIC_1 = (u16) 0x0008;
+       HPI_HPIC_2 = (u16) 0x0008;
+
+       udelay(100);
+
+       return 0;
+}
+
+#if 0
+/* turn off the host port interface */
+static void hpi_inactivate(void)
+{
+       volatile spc1920_pld_t *pld = (spc1920_pld_t *) CONFIG_SYS_SPC1920_PLD_BASE;
+
+       /* deactivate hpi */
+       pld->dsp_hpi_on = 0x0;
+
+       /* reset the dsp */
+       /* pld->dsp_reset = 0x0; */
+
+       /* turn off the power EN_DSP_POWER# high*/
+       /* currently always on TBD */
+
+}
+#endif
+
+/* reset the DSP */
+static void dsp_reset(void)
+{
+       volatile spc1920_pld_t *pld = (spc1920_pld_t *) CONFIG_SYS_SPC1920_PLD_BASE;
+       pld->dsp_reset = 0x1;
+       pld->dsp_hpi_on = 0x0;
+
+       udelay(300000);
+
+       pld->dsp_reset = 0x0;
+       pld->dsp_hpi_on = 0x1;
+}
+
+
+/* write using autoinc (count is number of 32bit words) */
+static int hpi_write_inc(u32 addr, u32 *data, u32 count)
+{
+       int i;
+       u16 addr1, addr2;
+
+       addr1 = (u16) ((addr >> 16) & 0xffff); /* First HW is most significant */
+       addr2 = (u16) (addr & 0xffff);
+
+       /* write address */
+       HPI_HPIA_1 = addr1;
+       HPI_HPIA_2 = addr2;
+
+       debug("writing from data=0x%lx to 0x%lx\n",
+               (ulong)data, (ulong)(data+count));
+
+       for(i=0; i<count; i++) {
+               HPI_HPID_INC_1 = (u16) ((data[i] >> 16) & 0xffff);
+               HPI_HPID_INC_2 = (u16) (data[i] & 0xffff);
+               debug("hpi_write_inc: data1=0x%x, data2=0x%x\n",
+                      (u16) ((data[i] >> 16) & 0xffff),
+                      (u16) (data[i] & 0xffff));
+       }
+#if 0
+       while(data_ptr < (u16*) (data + count)) {
+               HPI_HPID_INC_1 = *(data_ptr++);
+               HPI_HPID_INC_2 = *(data_ptr++);
+       }
+#endif
+
+       /* return number of bytes written */
+       return count;
+}
+
+/*
+ * read using autoinc (count is number of 32bit words)
+ */
+static int hpi_read_inc(u32 addr, u32 *buf, u32 count)
+{
+       int i;
+       u16 addr1, addr2, data1, data2;
+
+       addr1 = (u16) ((addr >> 16) & 0xffff); /* First HW is most significant */
+       addr2 = (u16) (addr & 0xffff);
+
+       /* write address */
+       HPI_HPIA_1 = addr1;
+       HPI_HPIA_2 = addr2;
+
+       for(i=0; i<count; i++) {
+               data1 = HPI_HPID_INC_1;
+               data2 = HPI_HPID_INC_2;
+               debug("hpi_read_inc: data1=0x%x, data2=0x%x\n", data1, data2);
+               buf[i] = (((u32) data1) << 16) | (data2 & 0xffff);
+       }
+
+#if 0
+       while(buf_ptr < (u16*) (buf + count)) {
+               *(buf_ptr++) = HPI_HPID_INC_1;
+               *(buf_ptr++) = HPI_HPID_INC_2;
+       }
+#endif
+
+       /* return number of bytes read */
+       return count;
+}
+
+
+/* write to non- auto inc regs */
+static int hpi_write_noinc(u32 addr, u32 data)
+{
+
+       u16 addr1, addr2, data1, data2;
+
+       addr1 = (u16) ((addr >> 16) & 0xffff); /* First HW is most significant */
+       addr2 = (u16) (addr & 0xffff);
+
+       /* printf("hpi_write_noinc: addr1=0x%x, addr2=0x%x\n", addr1, addr2); */
+
+       HPI_HPIA_1 = addr1;
+       HPI_HPIA_2 = addr2;
+
+       data1 = (u16) ((data >> 16) & 0xffff);
+       data2 = (u16) (data & 0xffff);
+
+       /* printf("hpi_write_noinc: data1=0x%x, data2=0x%x\n", data1, data2); */
+
+       HPI_HPID_NOINC_1 = data1;
+       HPI_HPID_NOINC_2 = data2;
+
+       return 0;
+}
+
+/* read from non- auto inc regs */
+static u32 hpi_read_noinc(u32 addr)
+{
+       u16 addr1, addr2, data1, data2;
+       u32 ret;
+
+       addr1 = (u16) ((addr >> 16) & 0xffff); /* First HW is most significant */
+       addr2 = (u16) (addr & 0xffff);
+
+       HPI_HPIA_1 = addr1;
+       HPI_HPIA_2 = addr2;
+
+       /* printf("hpi_read_noinc: addr1=0x%x, addr2=0x%x\n", addr1, addr2); */
+
+       data1 = HPI_HPID_NOINC_1;
+       data2 = HPI_HPID_NOINC_2;
+
+       /* printf("hpi_read_noinc: data1=0x%x, data2=0x%x\n", data1, data2); */
+
+       ret = (((u32) data1) << 16) | (data2 & 0xffff);
+       return ret;
+
+}
+
+/*
+ * Host Port Interface Tests
+ */
+
+#ifndef HPI_TEST_OSZI
+/* main test function */
+int hpi_test(void)
+{
+       int err = 0;
+       u32 i, ii, pattern, tmp;
+
+       pattern = HPI_TEST_PATTERN;
+
+       u32 test_data[HPI_TEST_CHUNKSIZE];
+       u32 read_data[HPI_TEST_CHUNKSIZE];
+
+       debug("hpi_test: activating hpi...");
+       hpi_activate();
+       debug("OK.\n");
+
+#if 0
+       /* Dump the first 1024 bytes
+        *
+        */
+       for(i=0; i<1024; i+=4) {
+               if(i%16==0)
+                       printf("\n0x%08x: ", i);
+               printf("0x%08x ", hpi_read_noinc(i));
+       }
+#endif
+
+       /* HPIA read-write test
+        *
+        */
+       debug("hpi_test: starting HPIA read-write tests...\n");
+       err |= hpi_write_addr_test(0xdeadc0de);
+       err |= hpi_write_addr_test(0xbeefd00d);
+       err |= hpi_write_addr_test(0xabcd1234);
+       err |= hpi_write_addr_test(0xaaaaaaaa);
+       if(err) {
+               debug("hpi_test: HPIA read-write tests: *** FAILED ***\n");
+               return -1;
+       }
+       debug("hpi_test: HPIA read-write tests: OK\n");
+
+
+       /* read write test using nonincremental data regs
+        *
+        */
+       debug("hpi_test: starting nonincremental tests...\n");
+       for(i=HPI_TEST_START; i<HPI_TEST_END; i+=4) {
+               err |= hpi_read_write_test(i, pattern);
+
+               /* stolen from cmd_mem.c */
+               if(pattern & 0x80000000) {
+                       pattern = -pattern;     /* complement & increment */
+               } else {
+                       pattern = ~pattern;
+               }
+               err |= hpi_read_write_test(i, pattern);
+
+               if(err) {
+                       debug("hpi_test: nonincremental tests *** FAILED ***\n");
+                       return -1;
+               }
+       }
+       debug("hpi_test: nonincremental test OK\n");
+
+       /* read write a chunk of data using nonincremental data regs
+        *
+        */
+       debug("hpi_test: starting nonincremental chunk tests...\n");
+       pattern = HPI_TEST_PATTERN;
+       for(i=HPI_TEST_START; i<HPI_TEST_END; i+=4) {
+               hpi_write_noinc(i, pattern);
+
+               /* stolen from cmd_mem.c */
+               if(pattern & 0x80000000) {
+                       pattern = -pattern;     /* complement & increment */
+               } else {
+                       pattern = ~pattern;
+               }
+       }
+       pattern = HPI_TEST_PATTERN;
+       for(i=HPI_TEST_START; i<HPI_TEST_END; i+=4) {
+               tmp = hpi_read_noinc(i);
+
+               if(tmp != pattern) {
+                       debug("hpi_test: noninc chunk test *** FAILED *** @ 0x%x, written=0x%x, read=0x%x\n", i, pattern, tmp);
+                       err = -1;
+               }
+               /* stolen from cmd_mem.c */
+               if(pattern & 0x80000000) {
+                       pattern = -pattern;     /* complement & increment */
+               } else {
+                       pattern = ~pattern;
+               }
+       }
+       if(err)
+               return -1;
+       debug("hpi_test: nonincremental chunk test OK\n");
+
+
+#ifdef DO_TINY_TEST
+       /* small verbose test using autoinc and nonautoinc to compare
+        *
+        */
+       debug("hpi_test: tiny_autoinc_test...\n");
+       hpi_tiny_autoinc_test();
+       debug("hpi_test: tiny_autoinc_test done\n");
+#endif /* DO_TINY_TEST */
+
+
+       /* $%& write a chunk of data using the autoincremental regs
+        *
+        */
+       debug("hpi_test: starting autoinc test %d chunks with 0x%x bytes...\n",
+              ((HPI_TEST_END - HPI_TEST_START) / HPI_TEST_CHUNKSIZE),
+              HPI_TEST_CHUNKSIZE);
+
+       for(i=HPI_TEST_START;
+           i < ((HPI_TEST_END - HPI_TEST_START) / HPI_TEST_CHUNKSIZE);
+           i++) {
+               /* generate the pattern data */
+               debug("generating pattern data: ");
+               for(ii = 0; ii < HPI_TEST_CHUNKSIZE; ii++) {
+                       debug("0x%x ", pattern);
+
+                       test_data[ii] = pattern;
+                       read_data[ii] = 0x0; /* zero to be sure */
+
+                       /* stolen from cmd_mem.c */
+                       if(pattern & 0x80000000) {
+                               pattern = -pattern;     /* complement & increment */
+                       } else {
+                               pattern = ~pattern;
+                       }
+               }
+               debug("done\n");
+
+               debug("Writing autoinc data @ 0x%x\n", i);
+               hpi_write_inc(i, test_data, HPI_TEST_CHUNKSIZE);
+
+               debug("Reading autoinc data @ 0x%x\n", i);
+               hpi_read_inc(i, read_data, HPI_TEST_CHUNKSIZE);
+
+               /* compare */
+               for(ii = 0; ii < HPI_TEST_CHUNKSIZE; ii++) {
+                       debug("hpi_test_autoinc: @ 0x%x, written=0x%x, read=0x%x", i+ii, test_data[ii], read_data[ii]);
+                       if(read_data[ii] != test_data[ii]) {
+                               debug("hpi_test: autoinc test @ 0x%x, written=0x%x, read=0x%x *** FAILED ***\n", i+ii, test_data[ii], read_data[ii]);
+                               return -1;
+                       }
+               }
+       }
+       debug("hpi_test: autoinc test OK\n");
+
+       return 0;
+}
+#else /* HPI_TEST_OSZI */
+int hpi_test(void)
+{
+       int i;
+       u32 read_data[TINY_AUTOINC_DATA_SIZE];
+
+       unsigned int dummy_data[TINY_AUTOINC_DATA_SIZE] = {
+               0x11112222, 0x33334444, 0x55556666, 0x77778888,
+               0x9999aaaa, 0xbbbbcccc, 0xddddeeee, 0xffff1111,
+               0x00010002, 0x00030004, 0x00050006, 0x00070008,
+               0x0009000a, 0x000b000c, 0x000d000e, 0x000f0001
+       };
+
+       debug("hpi_test: activating hpi...");
+       hpi_activate();
+       debug("OK.\n");
+
+       while(1) {
+               led9(1);
+               debug(" writing to autoinc...\n");
+               hpi_write_inc(TINY_AUTOINC_BASE_ADDR,
+                             dummy_data, TINY_AUTOINC_DATA_SIZE);
+
+               debug(" reading from autoinc...\n");
+               hpi_read_inc(TINY_AUTOINC_BASE_ADDR,
+                            read_data, TINY_AUTOINC_DATA_SIZE);
+
+               for(i=0; i < (TINY_AUTOINC_DATA_SIZE); i++) {
+                       debug(" written=0x%x, read(inc)=0x%x\n",
+                              dummy_data[i], read_data[i]);
+               }
+               led9(0);
+               udelay(2000000);
+       }
+       return 0;
+}
+#endif
+
+/* test if Host Port Address Register can be written correctly */
+static int hpi_write_addr_test(u32 addr)
+{
+       u32 read_back;
+       /* write address */
+       HPI_HPIA_1 = ((u16) (addr >> 16)); /* First HW is most significant */
+       HPI_HPIA_2 = ((u16) addr);
+
+       read_back = (((u32) HPI_HPIA_1)<<16) | ((u32) HPI_HPIA_2);
+
+       if(read_back == addr) {
+               debug(" hpi_write_addr_test OK: written=0x%x, read=0x%x\n",
+                      addr, read_back);
+               return 0;
+       } else {
+               debug(" hpi_write_addr_test *** FAILED ***: written=0x%x, read=0x%x\n",
+                     addr, read_back);
+               return -1;
+       }
+
+       return 0;
+}
+
+/* test if a simple read/write sequence succeeds */
+static int hpi_read_write_test(u32 addr, u32 data)
+{
+       u32 read_back;
+
+       hpi_write_noinc(addr, data);
+       read_back = hpi_read_noinc(addr);
+
+       if(read_back == data) {
+               debug(" hpi_read_write_test: OK, addr=0x%x written=0x%x, read=0x%x\n", addr, data, read_back);
+               return 0;
+       } else {
+               debug(" hpi_read_write_test: *** FAILED ***, addr=0x%x written=0x%x, read=0x%x\n", addr, data, read_back);
+               return -1;
+       }
+
+       return 0;
+}
+
+#ifdef DO_TINY_TEST
+static int hpi_tiny_autoinc_test(void)
+{
+       int i;
+       u32 read_data[TINY_AUTOINC_DATA_SIZE];
+       u32 read_data_noinc[TINY_AUTOINC_DATA_SIZE];
+
+       unsigned int dummy_data[TINY_AUTOINC_DATA_SIZE] = {
+               0x11112222, 0x33334444, 0x55556666, 0x77778888,
+               0x9999aaaa, 0xbbbbcccc, 0xddddeeee, 0xffff1111,
+               0x00010002, 0x00030004, 0x00050006, 0x00070008,
+               0x0009000a, 0x000b000c, 0x000d000e, 0x000f0001
+       };
+
+       printf(" writing to autoinc...\n");
+       hpi_write_inc(TINY_AUTOINC_BASE_ADDR, dummy_data, TINY_AUTOINC_DATA_SIZE);
+
+       printf(" reading from autoinc...\n");
+       hpi_read_inc(TINY_AUTOINC_BASE_ADDR, read_data, TINY_AUTOINC_DATA_SIZE);
+
+       printf(" reading from noinc for comparison...\n");
+       for(i=0; i < (TINY_AUTOINC_DATA_SIZE); i++)
+               read_data_noinc[i] = hpi_read_noinc(TINY_AUTOINC_BASE_ADDR+i*4);
+
+       for(i=0; i < (TINY_AUTOINC_DATA_SIZE); i++) {
+               printf(" written=0x%x, read(inc)=0x%x, read(noinc)=0x%x\n",
+                      dummy_data[i], read_data[i], read_data_noinc[i]);
+       }
+       return 0;
+}
+#endif /* DO_TINY_TEST */
+
+#endif /* CONFIG_SPC1920_HPI_TEST */