Add qemu 2.4.0
[kvmfornfv.git] / qemu / roms / u-boot / board / snmc / qs850 / flash.c
diff --git a/qemu/roms/u-boot/board/snmc/qs850/flash.c b/qemu/roms/u-boot/board/snmc/qs850/flash.c
new file mode 100644 (file)
index 0000000..2fc23f2
--- /dev/null
@@ -0,0 +1,600 @@
+/*
+ * (C) Copyright 2003
+ * MuLogic B.V.
+ *
+ * (C) Copyright 2001
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
+ * SPDX-License-Identifier:    GPL-2.0+
+ */
+
+#include <common.h>
+#include <asm/ppc4xx.h>
+#include <asm/u-boot.h>
+#include <asm/processor.h>
+
+flash_info_t flash_info[CONFIG_SYS_MAX_FLASH_BANKS]; /* info for FLASH chips */
+
+
+#define FLASH_WORD_SIZE unsigned long
+#define FLASH_ID_MASK 0xFFFFFFFF
+
+/*-----------------------------------------------------------------------
+ * Functions
+ */
+/* stolen from esteem192e/flash.c */
+ulong flash_get_size (volatile FLASH_WORD_SIZE *addr, flash_info_t *info);
+
+static int write_word (flash_info_t *info, ulong dest, ulong data);
+static void flash_get_offsets (ulong base, flash_info_t *info);
+
+
+/*-----------------------------------------------------------------------
+ */
+
+unsigned long flash_init (void)
+{
+       unsigned long size_b0, size_b1;
+       int i;
+       uint pbcr;
+       unsigned long base_b0, base_b1;
+       volatile FLASH_WORD_SIZE* flash_base;
+
+       /* Init: no FLASHes known */
+       for (i=0; i<CONFIG_SYS_MAX_FLASH_BANKS; ++i) {
+               flash_info[i].flash_id = FLASH_UNKNOWN;
+       }
+
+       /* Static FLASH Bank configuration here */
+       /* Test for 8M Flash first */
+       debug ("\n## Get flash bank 1 size @ 0x%08x\n",FLASH_BASE0_8M_PRELIM);
+       flash_base = (volatile FLASH_WORD_SIZE*)(FLASH_BASE0_8M_PRELIM);
+       size_b0 = flash_get_size(flash_base, &flash_info[0]);
+
+       if (flash_info[0].flash_id == FLASH_UNKNOWN) {
+               printf ("## Unknown FLASH on Bank 0 - Size = 0x%08lx = %ld MB\n",
+               size_b0, size_b0<<20);
+               return 0;
+       }
+
+       if (size_b0 < 8*1024*1024) {
+               /* Not quite 8M, try 4M Flash base address */
+               debug ("\n## Get flash bank 1 size @ 0x%08x\n",FLASH_BASE0_4M_PRELIM);
+               flash_base = (volatile FLASH_WORD_SIZE*)(FLASH_BASE0_4M_PRELIM);
+               size_b0 = flash_get_size(flash_base, &flash_info[0]);
+       }
+
+       if (flash_info[0].flash_id == FLASH_UNKNOWN) {
+               printf ("## Unknown FLASH on Bank 0 - Size = 0x%08lx = %ld MB\n",
+               size_b0, size_b0<<20);
+               return 0;
+       }
+
+       /* Only one bank */
+       if (CONFIG_SYS_MAX_FLASH_BANKS == 1) {
+               /* Setup offsets */
+               flash_get_offsets ((ulong)flash_base, &flash_info[0]);
+
+               /* Monitor protection ON by default */
+               (void)flash_protect(FLAG_PROTECT_SET, CONFIG_SYS_MONITOR_BASE,
+                       CONFIG_SYS_MONITOR_BASE+CONFIG_SYS_MONITOR_LEN-1, &flash_info[0]);
+               size_b1 = 0 ;
+               flash_info[0].size = size_b0;
+               return(size_b0);
+       }
+
+       /* We have 2 banks */
+       size_b1 = flash_get_size(flash_base, &flash_info[1]);
+
+       /* Re-do sizing to get full correct info */
+       if (size_b1) {
+               mtdcr(EBC0_CFGADDR, PB0CR);
+               pbcr = mfdcr(EBC0_CFGDATA);
+               mtdcr(EBC0_CFGADDR, PB0CR);
+               base_b1 = -size_b1;
+               pbcr = (pbcr & 0x0001ffff) | base_b1 | (((size_b1/1024/1024)-1)<<17);
+               mtdcr(EBC0_CFGDATA, pbcr);
+       }
+
+       if (size_b0) {
+               mtdcr(EBC0_CFGADDR, PB1CR);
+               pbcr = mfdcr(EBC0_CFGDATA);
+               mtdcr(EBC0_CFGADDR, PB1CR);
+               base_b0 = base_b1 - size_b0;
+               pbcr = (pbcr & 0x0001ffff) | base_b0 | (((size_b0/1024/1024)-1)<<17);
+               mtdcr(EBC0_CFGDATA, pbcr);
+       }
+
+       size_b0 = flash_get_size((volatile FLASH_WORD_SIZE *)base_b0, &flash_info[0]);
+       flash_get_offsets (base_b0, &flash_info[0]);
+
+       /* monitor protection ON by default */
+       (void)flash_protect(FLAG_PROTECT_SET, CONFIG_SYS_MONITOR_BASE,
+               CONFIG_SYS_MONITOR_BASE+CONFIG_SYS_MONITOR_LEN-1, &flash_info[0]);
+
+       if (size_b1) {
+               /* Re-do sizing to get full correct info */
+               size_b1 = flash_get_size((volatile FLASH_WORD_SIZE *)base_b1, &flash_info[1]);
+               flash_get_offsets (base_b1, &flash_info[1]);
+
+               /* monitor protection ON by default */
+               (void)flash_protect(FLAG_PROTECT_SET, base_b1+size_b1-CONFIG_SYS_MONITOR_LEN,
+                       base_b1+size_b1-1, &flash_info[1]);
+
+               /* monitor protection OFF by default (one is enough) */
+               (void)flash_protect(FLAG_PROTECT_CLEAR, base_b0+size_b0-CONFIG_SYS_MONITOR_LEN,
+                       base_b0+size_b0-1, &flash_info[0]);
+       } else {
+               flash_info[1].flash_id = FLASH_UNKNOWN;
+               flash_info[1].sector_count = -1;
+       }
+
+       flash_info[0].size = size_b0;
+       flash_info[1].size = size_b1;
+       return (size_b0 + size_b1);
+}
+
+
+/*-----------------------------------------------------------------------
+ This code is specific to the AM29DL163/AM29DL232 for the QS850/QS823.
+ */
+
+static void flash_get_offsets (ulong base, flash_info_t *info)
+{
+       int i;
+       long large_sect_size;
+       long small_sect_size;
+
+       /* set up sector start adress table */
+       large_sect_size = info->size / (info->sector_count - 8 + 1);
+       small_sect_size = large_sect_size / 8;
+
+       if (info->flash_id & FLASH_BTYPE) {
+
+               /* set sector offsets for bottom boot block type */
+               for (i = 0; i < 7; i++) {
+                       info->start[i] = base;
+                       base += small_sect_size;
+               }
+
+               for (; i < info->sector_count; i++) {
+                       info->start[i] = base;
+                       base += large_sect_size;
+               }
+       }
+       else
+       {
+               /* set sector offsets for top boot block type */
+               for (i = 0; i < (info->sector_count - 8); i++) {
+                       info->start[i] = base;
+                       base += large_sect_size;
+               }
+
+               for (; i < info->sector_count; i++) {
+                       info->start[i] = base;
+                       base += small_sect_size;
+               }
+       }
+}
+
+/*-----------------------------------------------------------------------
+ */
+
+void flash_print_info  (flash_info_t *info)
+{
+       int i;
+       uchar *boottype;
+       uchar botboot[]=", bottom boot sect)\n";
+       uchar topboot[]=", top boot sector)\n";
+
+       if (info->flash_id == FLASH_UNKNOWN) {
+               printf ("missing or unknown FLASH type\n");
+               return;
+       }
+
+       switch (info->flash_id & FLASH_VENDMASK) {
+               case FLASH_MAN_AMD:
+                       printf ("AMD ");
+                       break;
+               case FLASH_MAN_FUJ:
+                       printf ("FUJITSU ");
+                       break;
+               case FLASH_MAN_SST:
+                       printf ("SST ");
+                       break;
+               case FLASH_MAN_STM:
+                       printf ("STM ");
+                       break;
+               case FLASH_MAN_INTEL:
+                       printf ("INTEL ");
+                       break;
+               default:
+                       printf ("Unknown Vendor ");
+                       break;
+       }
+
+       if (info->flash_id & 0x0001 ) {
+               boottype = botboot;
+       } else {
+               boottype = topboot;
+       }
+
+       switch (info->flash_id & FLASH_TYPEMASK) {
+               case FLASH_AM160B:
+                       printf ("AM29LV160B (16 Mbit%s",boottype);
+                       break;
+               case FLASH_AM160T:
+                       printf ("AM29LV160T (16 Mbit%s",boottype);
+                       break;
+               case FLASH_AMDL163T:
+                       printf ("AM29DL163T (16 Mbit%s",boottype);
+                       break;
+               case FLASH_AMDL163B:
+                       printf ("AM29DL163B (16 Mbit%s",boottype);
+                       break;
+               case FLASH_AM320B:
+                       printf ("AM29LV320B (32 Mbit%s",boottype);
+                       break;
+               case FLASH_AM320T:
+                       printf ("AM29LV320T (32 Mbit%s",boottype);
+                       break;
+               case FLASH_AMDL323T:
+                       printf ("AM29DL323T (32 Mbit%s",boottype);
+                       break;
+               case FLASH_AMDL323B:
+                       printf ("AM29DL323B (32 Mbit%s",boottype);
+                       break;
+               case FLASH_AMDL322T:
+                       printf ("AM29DL322T (32 Mbit%s",boottype);
+                       break;
+               default:
+                       printf ("Unknown Chip Type\n");
+                       break;
+       }
+
+       printf ("  Size: %ld MB in %d Sectors\n",
+       info->size >> 20, info->sector_count);
+
+       printf ("  Sector Start Addresses:");
+       for (i=0; i<info->sector_count; ++i) {
+               if ((i % 5) == 0)
+                       printf ("\n   ");
+               printf (" %08lX%s", info->start[i],
+                       info->protect[i] ? " (RO)" : "     ");
+       }
+       printf ("\n");
+       return;
+}
+
+
+/*-----------------------------------------------------------------------
+ * The following code cannot be run from FLASH!
+ */
+ulong flash_get_size (volatile FLASH_WORD_SIZE *addr, flash_info_t *info)
+{
+       short i;
+       ulong base = (ulong)addr;
+       FLASH_WORD_SIZE value;
+
+       /* Write auto select command: read Manufacturer ID */
+
+       /*
+        * Note: if it is an AMD flash and the word at addr[0000]
+        * is 0x00890089 this routine will think it is an Intel
+        * flash device and may(most likely) cause trouble.
+        */
+
+       addr[0x0000] = 0x00900090;
+       if(addr[0x0000] != 0x00890089){
+               addr[0x0555] = 0x00AA00AA;
+               addr[0x02AA] = 0x00550055;
+               addr[0x0555] = 0x00900090;
+       }
+       value = addr[0];
+
+       switch (value) {
+               case (AMD_MANUFACT & FLASH_ID_MASK):
+                       info->flash_id = FLASH_MAN_AMD;
+                       break;
+               case (FUJ_MANUFACT & FLASH_ID_MASK):
+                       info->flash_id = FLASH_MAN_FUJ;
+                       break;
+               case (STM_MANUFACT & FLASH_ID_MASK):
+                       info->flash_id = FLASH_MAN_STM;
+                       break;
+               case (SST_MANUFACT & FLASH_ID_MASK):
+                       info->flash_id = FLASH_MAN_SST;
+                       break;
+               case (INTEL_MANUFACT & FLASH_ID_MASK):
+                       info->flash_id = FLASH_MAN_INTEL;
+                       break;
+               default:
+                       info->flash_id = FLASH_UNKNOWN;
+                       info->sector_count = 0;
+                       info->size = 0;
+                       return (0); /* no or unknown flash */
+       }
+
+       value = addr[1]; /* device ID */
+
+       switch (value) {
+               case (AMD_ID_LV160T & FLASH_ID_MASK):
+                       info->flash_id += FLASH_AM160T;
+                       info->sector_count = 35;
+                       info->size = 0x00400000;
+                       break; /* => 4 MB */
+
+               case (AMD_ID_LV160B & FLASH_ID_MASK):
+                       info->flash_id += FLASH_AM160B;
+                       info->sector_count = 35;
+                       info->size = 0x00400000;
+                       break; /* => 4 MB */
+
+               case (AMD_ID_DL163T & FLASH_ID_MASK):
+                       info->flash_id += FLASH_AMDL163T;
+                       info->sector_count = 39;
+                       info->size = 0x00400000;
+                       break; /* => 4 MB */
+
+               case (AMD_ID_DL163B & FLASH_ID_MASK):
+                       info->flash_id += FLASH_AMDL163B;
+                       info->sector_count = 39;
+                       info->size = 0x00400000;
+                       break; /* => 4 MB */
+
+               case (AMD_ID_DL323T & FLASH_ID_MASK):
+                       info->flash_id += FLASH_AMDL323T;
+                       info->sector_count = 71;
+                       info->size = 0x00800000;
+                       break; /* => 8 MB */
+
+               case (AMD_ID_DL323B & FLASH_ID_MASK):
+                       info->flash_id += FLASH_AMDL323B;
+                       info->sector_count = 71;
+                       info->size = 0x00800000;
+                       break; /* => 8 MB */
+
+               case (AMD_ID_DL322T & FLASH_ID_MASK):
+                       info->flash_id += FLASH_AMDL322T;
+                       info->sector_count = 71;
+                       info->size = 0x00800000;
+                       break; /* => 8 MB */
+
+               default:
+                       /* FIXME*/
+                       info->flash_id = FLASH_UNKNOWN;
+                       return (0); /* => no or unknown flash */
+       }
+
+       flash_get_offsets(base, info);
+
+       /* check for protected sectors */
+       for (i = 0; i < info->sector_count; i++) {
+               /* read sector protection at sector address, (A7 .. A0) = 0x02 */
+               /* D0 = 1 if protected */
+               addr = (volatile FLASH_WORD_SIZE *)(info->start[i]);
+               info->protect[i] = addr[2] & 1;
+       }
+
+       /*
+        * Prevent writes to uninitialized FLASH.
+        */
+       if (info->flash_id != FLASH_UNKNOWN) {
+               addr = (volatile FLASH_WORD_SIZE *)info->start[0];
+               *addr = (0x00FF00FF & FLASH_ID_MASK);   /* reset bank */
+       }
+
+       return (info->size);
+}
+
+
+/*-----------------------------------------------------------------------
+ */
+
+int flash_erase (flash_info_t *info, int s_first, int s_last)
+{
+       volatile FLASH_WORD_SIZE *addr=(volatile FLASH_WORD_SIZE*)(info->start[0]);
+       int flag, prot, sect, l_sect;
+       ulong start, now, last;
+       int rcode = 0;
+
+       if ((s_first < 0) || (s_first > s_last)) {
+               if (info->flash_id == FLASH_UNKNOWN) {
+                       printf ("- missing\n");
+               } else {
+                       printf ("- no sectors to erase\n");
+               }
+               return 1;
+       }
+
+       if ((info->flash_id == FLASH_UNKNOWN) ||
+               (info->flash_id > FLASH_AMD_COMP) ) {
+               printf ("Can't erase unknown flash type - aborted\n");
+               return 1;
+       }
+
+       prot = 0;
+       for (sect=s_first; sect<=s_last; ++sect) {
+               if (info->protect[sect]) {
+                       prot++;
+               }
+       }
+
+       if (prot) {
+               printf ("- Warning: %d protected sectors will not be erased!\n",
+                       prot);
+       } else {
+               printf ("\n");
+       }
+
+       l_sect = -1;
+
+       /* Disable interrupts which might cause a timeout here */
+       flag = disable_interrupts();
+       addr[0x0555] = 0x00AA00AA;
+       addr[0x02AA] = 0x00550055;
+       addr[0x0555] = 0x00800080;
+       addr[0x0555] = 0x00AA00AA;
+       addr[0x02AA] = 0x00550055;
+       /* Start erase on unprotected sectors */
+       for (sect = s_first; sect<=s_last; sect++) {
+               if (info->protect[sect] == 0) { /* not protected */
+                       addr = (volatile FLASH_WORD_SIZE *)(info->start[sect]);
+                       addr[0] = (0x00300030 & FLASH_ID_MASK);
+                       l_sect = sect;
+               }
+       }
+
+       /* re-enable interrupts if necessary */
+       if (flag)
+               enable_interrupts();
+
+       /* wait at least 80us - let's wait 1 ms */
+       udelay (1000);
+
+       /*
+        * We wait for the last triggered sector
+        */
+       if (l_sect < 0)
+               goto DONE;
+
+       start = get_timer (0);
+       last  = start;
+       addr = (volatile FLASH_WORD_SIZE*)(info->start[l_sect]);
+       while ((addr[0] & (0x00800080&FLASH_ID_MASK)) !=
+                       (0x00800080&FLASH_ID_MASK)  )
+       {
+               if ((now = get_timer(start)) > CONFIG_SYS_FLASH_ERASE_TOUT) {
+                       printf ("Timeout\n");
+                       return 1;
+               }
+               /* show that we're waiting */
+               if ((now - last) > 1000) { /* every second */
+                       serial_putc ('.');
+                       last = now;
+               }
+       }
+
+DONE:
+       /* reset to read mode */
+       addr = (volatile FLASH_WORD_SIZE *)info->start[0];
+       addr[0] = (0x00F000F0 & FLASH_ID_MASK); /* reset bank */
+
+       printf (" done\n");
+       return rcode;
+}
+
+/*-----------------------------------------------------------------------
+ * Copy memory to flash, returns:
+ * 0 - OK
+ * 1 - write timeout
+ * 2 - Flash not erased
+ */
+
+int write_buff (flash_info_t *info, uchar *src, ulong addr, ulong cnt)
+{
+       ulong cp, wp, data;
+       int l;
+       int i, rc;
+
+       wp = (addr & ~3); /* get lower word aligned address */
+
+       /*
+        * handle unaligned start bytes
+        */
+       if ((l = addr - wp) != 0) {
+               data = 0;
+               for (i=0, cp=wp; i<l; ++i, ++cp) {
+                       data = (data << 8) | (*(uchar *)cp);
+               }
+               for (; i<4 && cnt>0; ++i) {
+                       data = (data << 8) | *src++;
+                       --cnt;
+                       ++cp;
+               }
+               for (; cnt==0 && i<4; ++i, ++cp) {
+                       data = (data << 8) | (*(uchar *)cp);
+               }
+
+               if ((rc = write_word(info, wp, data)) != 0) {
+                       return (rc);
+               }
+               wp += 4;
+       }
+
+       /*
+        * handle word aligned part
+        */
+       while (cnt >= 4) {
+               data = 0;
+               for (i=0; i<4; ++i) {
+                       data = (data << 8) | *src++;
+               }
+               if ((rc = write_word(info, wp, data)) != 0) {
+                       return (rc);
+               }
+               wp  += 4;
+               cnt -= 4;
+       }
+
+       if (cnt == 0) {
+               return (0);
+       }
+
+       /*
+        * handle unaligned tail bytes
+        */
+       data = 0;
+       for (i=0, cp=wp; i<4 && cnt>0; ++i, ++cp) {
+               data = (data << 8) | *src++;
+               --cnt;
+       }
+       for (; i<4; ++i, ++cp) {
+               data = (data << 8) | (*(uchar *)cp);
+       }
+
+       return (write_word(info, wp, data));
+}
+
+/*-----------------------------------------------------------------------
+ * Write a word to Flash, returns:
+ * 0 - OK
+ * 1 - write timeout
+ * 2 - Flash not erased
+ */
+static int write_word (flash_info_t *info, ulong dest, ulong data)
+{
+       vu_long *addr = (vu_long*)(info->start[0]);
+       ulong start;
+       int flag;
+
+       /* Check if Flash is (sufficiently) erased */
+       if ((*((vu_long *)dest) & data) != data) {
+               return (2);
+       }
+
+       /* Disable interrupts which might cause a timeout here */
+       flag = disable_interrupts();
+
+       /* AMD stuff */
+       addr[0x0555] = 0x00AA00AA;
+       addr[0x02AA] = 0x00550055;
+       addr[0x0555] = 0x00A000A0;
+
+       *((vu_long *)dest) = data;
+
+       /* re-enable interrupts if necessary */
+       if (flag)
+               enable_interrupts();
+
+       /* data polling for D7 */
+       start = get_timer(0);
+
+       while ((*((vu_long *)dest) & 0x00800080) != (data & 0x00800080)) {
+               if (get_timer(start) > CONFIG_SYS_FLASH_WRITE_TOUT) {
+                       return (1);
+               }
+       }
+
+       return (0);
+}