Add qemu 2.4.0

[kvmfornfv.git] / qemu / roms / u-boot / board / siemens / dxr2 / board.h

diff --git a/qemu/roms/u-boot/board/siemens/dxr2/board.h b/qemu/roms/u-boot/board/siemens/dxr2/board.h
new file mode 100644 (file)
index 0000000..abf5432
--- /dev/null
+++ b/qemu/roms/u-boot/board/siemens/dxr2/board.h
@@ -0,0 +1,70 @@
+/*
+ * board.h
+ *
+ * (C) Copyright 2013 Siemens Schweiz AG
+ * (C) Heiko Schocher, DENX Software Engineering, hs@denx.de.
+ *
+ * Based on:
+ * TI AM335x boards information header
+ * u-boot:/board/ti/am335x/board.h
+ *
+ * Copyright (C) 2011, Texas Instruments, Incorporated - http://www.ti.com/
+ *
+ * SPDX-License-Identifier:    GPL-2.0+
+ */
+
+#ifndef _BOARD_H_
+#define _BOARD_H_
+
+#define PARGS3(x)      settings.ddr3.x-ddr3_default.x, \
+                       settings.ddr3.x, ddr3_default.x
+#define PRINTARGS(y)   printf("%x, %8x, %8x : "#y"\n", PARGS3(y))
+#define MAGIC_CHIP     0x50494843
+
+/* Automatic generated definition */
+/* Wed, 18 Sep 2013 18:58:27 +0200 */
+/* From file: draco/ddr3-data-micron-v2.txt */
+struct ddr3_data {
+       unsigned int magic;                     /* 0x33524444 */
+       unsigned int version;                   /* 0x56312e34 */
+       unsigned short int ddr3_sratio;         /* 0x0100 */
+       unsigned short int iclkout;             /* 0x0001 */
+       unsigned short int dt0rdsratio0;        /* 0x003A */
+       unsigned short int dt0wdsratio0;        /* 0x008A */
+       unsigned short int dt0fwsratio0;        /* 0x010B */
+       unsigned short int dt0wrsratio0;        /* 0x00C4 */
+       unsigned int sdram_tim1;                /* 0x0888A39B */
+       unsigned int sdram_tim2;                /* 0x26247FDA */
+       unsigned int sdram_tim3;                /* 0x501F821F */
+       unsigned int emif_ddr_phy_ctlr_1;       /* 0x00100206 */
+       unsigned int sdram_config;              /* 0x61C04AB2 */
+       unsigned int ref_ctrl;                  /* 0x00000618 */
+       unsigned int ioctr_val;                 /* 0x0000018B */
+};
+
+struct chip_data {
+       unsigned int  magic;
+       char sdevname[16];
+       char shwver[7];
+};
+
+struct dxr2_baseboard_id {
+       struct ddr3_data ddr3;
+       struct chip_data chip;
+};
+
+/*
+ * We have three pin mux functions that must exist.  We must be able to enable
+ * uart0, for initial output and i2c0 to read the main EEPROM.  We then have a
+ * main pinmux function that can be overridden to enable all other pinmux that
+ * is required on the board.
+ */
+void enable_uart0_pin_mux(void);
+void enable_uart1_pin_mux(void);
+void enable_uart2_pin_mux(void);
+void enable_uart3_pin_mux(void);
+void enable_uart4_pin_mux(void);
+void enable_uart5_pin_mux(void);
+void enable_i2c0_pin_mux(void);
+void enable_board_pin_mux(void);
+#endif