Add qemu 2.4.0

[kvmfornfv.git] / qemu / roms / u-boot / board / sbc8349 / pci.c

diff --git a/qemu/roms/u-boot/board/sbc8349/pci.c b/qemu/roms/u-boot/board/sbc8349/pci.c
new file mode 100644 (file)
index 0000000..e792fe3
--- /dev/null
+++ b/qemu/roms/u-boot/board/sbc8349/pci.c
@@ -0,0 +1,71 @@
+/*
+ * pci.c -- WindRiver SBC8349 PCI board support.
+ * Copyright (c) 2006 Wind River Systems, Inc.
+ * Copyright (C) 2006-2009 Freescale Semiconductor, Inc.
+ *
+ * Based on MPC8349 PCI support but w/o PIB related code.
+ *
+ * SPDX-License-Identifier:    GPL-2.0+
+ */
+
+#include <asm/mmu.h>
+#include <asm/io.h>
+#include <common.h>
+#include <mpc83xx.h>
+#include <pci.h>
+#include <i2c.h>
+#include <asm/fsl_i2c.h>
+
+DECLARE_GLOBAL_DATA_PTR;
+
+static struct pci_region pci1_regions[] = {
+       {
+               bus_start: CONFIG_SYS_PCI1_MEM_BASE,
+               phys_start: CONFIG_SYS_PCI1_MEM_PHYS,
+               size: CONFIG_SYS_PCI1_MEM_SIZE,
+               flags: PCI_REGION_MEM | PCI_REGION_PREFETCH
+       },
+       {
+               bus_start: CONFIG_SYS_PCI1_IO_BASE,
+               phys_start: CONFIG_SYS_PCI1_IO_PHYS,
+               size: CONFIG_SYS_PCI1_IO_SIZE,
+               flags: PCI_REGION_IO
+       },
+       {
+               bus_start: CONFIG_SYS_PCI1_MMIO_BASE,
+               phys_start: CONFIG_SYS_PCI1_MMIO_PHYS,
+               size: CONFIG_SYS_PCI1_MMIO_SIZE,
+               flags: PCI_REGION_MEM
+       },
+};
+
+/*
+ * pci_init_board()
+ *
+ * NOTICE: PCI2 is not supported. There is only one
+ * physical PCI slot on the board.
+ *
+ */
+void
+pci_init_board(void)
+{
+       volatile immap_t *immr = (volatile immap_t *)CONFIG_SYS_IMMR;
+       volatile clk83xx_t *clk = (volatile clk83xx_t *)&immr->clk;
+       volatile law83xx_t *pci_law = immr->sysconf.pcilaw;
+       struct pci_region *reg[] = { pci1_regions };
+
+       /* Enable all 8 PCI_CLK_OUTPUTS */
+       clk->occr = 0xff000000;
+       udelay(2000);
+
+       /* Configure PCI Local Access Windows */
+       pci_law[0].bar = CONFIG_SYS_PCI1_MEM_PHYS & LAWBAR_BAR;
+       pci_law[0].ar = LAWAR_EN | LAWAR_SIZE_1G;
+
+       pci_law[1].bar = CONFIG_SYS_PCI1_IO_PHYS & LAWBAR_BAR;
+       pci_law[1].ar = LAWAR_EN | LAWAR_SIZE_4M;
+
+       udelay(2000);
+
+       mpc83xx_pci_init(1, reg);
+}