--- /dev/null
+/*
+ * Copyright (C) 2011 Samsung Electronics
+ * Heungjun Kim <riverful.kim@samsung.com>
+ * Kyungmin Park <kyungmin.park@samsung.com>
+ * Donghwa Lee <dh09.lee@samsung.com>
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#include <common.h>
+#include <lcd.h>
+#include <asm/io.h>
+#include <asm/arch/cpu.h>
+#include <asm/arch/gpio.h>
+#include <asm/arch/pinmux.h>
+#include <asm/arch/clock.h>
+#include <asm/arch/mipi_dsim.h>
+#include <asm/arch/watchdog.h>
+#include <asm/arch/power.h>
+#include <power/pmic.h>
+#include <usb/s3c_udc.h>
+#include <power/max8997_pmic.h>
+#include <power/max8997_muic.h>
+#include <power/battery.h>
+#include <power/max17042_fg.h>
+#include <libtizen.h>
+#include <usb.h>
+#include <usb_mass_storage.h>
+
+#include "setup.h"
+
+DECLARE_GLOBAL_DATA_PTR;
+
+unsigned int board_rev;
+
+#ifdef CONFIG_REVISION_TAG
+u32 get_board_rev(void)
+{
+ return board_rev;
+}
+#endif
+
+static void check_hw_revision(void);
+struct s3c_plat_otg_data s5pc210_otg_data;
+
+int exynos_init(void)
+{
+ check_hw_revision();
+ printf("HW Revision:\t0x%x\n", board_rev);
+
+ return 0;
+}
+
+void i2c_init_board(void)
+{
+ int err;
+ struct exynos4_gpio_part2 *gpio2 =
+ (struct exynos4_gpio_part2 *)samsung_get_base_gpio_part2();
+
+ /* I2C_5 -> PMIC */
+ err = exynos_pinmux_config(PERIPH_ID_I2C5, PINMUX_FLAG_NONE);
+ if (err) {
+ debug("I2C%d not configured\n", (I2C_5));
+ return;
+ }
+
+ /* I2C_8 -> FG */
+ s5p_gpio_direction_output(&gpio2->y4, 0, 1);
+ s5p_gpio_direction_output(&gpio2->y4, 1, 1);
+}
+
+static void trats_low_power_mode(void)
+{
+ struct exynos4_clock *clk =
+ (struct exynos4_clock *)samsung_get_base_clock();
+ struct exynos4_power *pwr =
+ (struct exynos4_power *)samsung_get_base_power();
+
+ /* Power down CORE1 */
+ /* LOCAL_PWR_CFG [1:0] 0x3 EN, 0x0 DIS */
+ writel(0x0, &pwr->arm_core1_configuration);
+
+ /* Change the APLL frequency */
+ /* ENABLE (1 enable) | LOCKED (1 locked) */
+ /* [31] | [29] */
+ /* FSEL | MDIV | PDIV | SDIV */
+ /* [27] | [25:16] | [13:8] | [2:0] */
+ writel(0xa0c80604, &clk->apll_con0);
+
+ /* Change CPU0 clock divider */
+ /* CORE2_RATIO | APLL_RATIO | PCLK_DBG_RATIO | ATB_RATIO */
+ /* [30:28] | [26:24] | [22:20] | [18:16] */
+ /* PERIPH_RATIO | COREM1_RATIO | COREM0_RATIO | CORE_RATIO */
+ /* [14:12] | [10:8] | [6:4] | [2:0] */
+ writel(0x00000100, &clk->div_cpu0);
+
+ /* CLK_DIV_STAT_CPU0 - wait until clock gets stable (0 = stable) */
+ while (readl(&clk->div_stat_cpu0) & 0x1111111)
+ continue;
+
+ /* Change clock divider ratio for DMC */
+ /* DMCP_RATIO | DMCD_RATIO */
+ /* [22:20] | [18:16] */
+ /* DMC_RATIO | DPHY_RATIO | ACP_PCLK_RATIO | ACP_RATIO */
+ /* [14:12] | [10:8] | [6:4] | [2:0] */
+ writel(0x13113117, &clk->div_dmc0);
+
+ /* CLK_DIV_STAT_DMC0 - wait until clock gets stable (0 = stable) */
+ while (readl(&clk->div_stat_dmc0) & 0x11111111)
+ continue;
+
+ /* Turn off unnecessary power domains */
+ writel(0x0, &pwr->xxti_configuration); /* XXTI */
+ writel(0x0, &pwr->cam_configuration); /* CAM */
+ writel(0x0, &pwr->tv_configuration); /* TV */
+ writel(0x0, &pwr->mfc_configuration); /* MFC */
+ writel(0x0, &pwr->g3d_configuration); /* G3D */
+ writel(0x0, &pwr->gps_configuration); /* GPS */
+ writel(0x0, &pwr->gps_alive_configuration); /* GPS_ALIVE */
+
+ /* Turn off unnecessary clocks */
+ writel(0x0, &clk->gate_ip_cam); /* CAM */
+ writel(0x0, &clk->gate_ip_tv); /* TV */
+ writel(0x0, &clk->gate_ip_mfc); /* MFC */
+ writel(0x0, &clk->gate_ip_g3d); /* G3D */
+ writel(0x0, &clk->gate_ip_image); /* IMAGE */
+ writel(0x0, &clk->gate_ip_gps); /* GPS */
+}
+
+static int pmic_init_max8997(void)
+{
+ struct pmic *p = pmic_get("MAX8997_PMIC");
+ int i = 0, ret = 0;
+ u32 val;
+
+ if (pmic_probe(p))
+ return -1;
+
+ /* BUCK1 VARM: 1.2V */
+ val = (1200000 - 650000) / 25000;
+ ret |= pmic_reg_write(p, MAX8997_REG_BUCK1DVS1, val);
+ val = ENBUCK | ACTIVE_DISCHARGE; /* DVS OFF */
+ ret |= pmic_reg_write(p, MAX8997_REG_BUCK1CTRL, val);
+
+ /* BUCK2 VINT: 1.1V */
+ val = (1100000 - 650000) / 25000;
+ ret |= pmic_reg_write(p, MAX8997_REG_BUCK2DVS1, val);
+ val = ENBUCK | ACTIVE_DISCHARGE; /* DVS OFF */
+ ret |= pmic_reg_write(p, MAX8997_REG_BUCK2CTRL, val);
+
+
+ /* BUCK3 G3D: 1.1V - OFF */
+ ret |= pmic_reg_read(p, MAX8997_REG_BUCK3CTRL, &val);
+ val &= ~ENBUCK;
+ ret |= pmic_reg_write(p, MAX8997_REG_BUCK3CTRL, val);
+
+ val = (1100000 - 750000) / 50000;
+ ret |= pmic_reg_write(p, MAX8997_REG_BUCK3DVS, val);
+
+ /* BUCK4 CAMISP: 1.2V - OFF */
+ ret |= pmic_reg_read(p, MAX8997_REG_BUCK4CTRL, &val);
+ val &= ~ENBUCK;
+ ret |= pmic_reg_write(p, MAX8997_REG_BUCK4CTRL, val);
+
+ val = (1200000 - 650000) / 25000;
+ ret |= pmic_reg_write(p, MAX8997_REG_BUCK4DVS, val);
+
+ /* BUCK5 VMEM: 1.2V */
+ val = (1200000 - 650000) / 25000;
+ for (i = 0; i < 8; i++)
+ ret |= pmic_reg_write(p, MAX8997_REG_BUCK5DVS1 + i, val);
+
+ val = ENBUCK | ACTIVE_DISCHARGE; /* DVS OFF */
+ ret |= pmic_reg_write(p, MAX8997_REG_BUCK5CTRL, val);
+
+ /* BUCK6 CAM AF: 2.8V */
+ /* No Voltage Setting Register */
+ /* GNSLCT 3.0X */
+ val = GNSLCT;
+ ret |= pmic_reg_write(p, MAX8997_REG_BUCK6CTRL, val);
+
+ /* BUCK7 VCC_SUB: 2.0V */
+ val = (2000000 - 750000) / 50000;
+ ret |= pmic_reg_write(p, MAX8997_REG_BUCK7DVS, val);
+
+ /* LDO1 VADC: 3.3V */
+ val = max8997_reg_ldo(3300000) | DIS_LDO; /* OFF */
+ ret |= pmic_reg_write(p, MAX8997_REG_LDO1CTRL, val);
+
+ /* LDO1 Disable active discharging */
+ ret |= pmic_reg_read(p, MAX8997_REG_LDO1CONFIG, &val);
+ val &= ~LDO_ADE;
+ ret |= pmic_reg_write(p, MAX8997_REG_LDO1CONFIG, val);
+
+ /* LDO2 VALIVE: 1.1V */
+ val = max8997_reg_ldo(1100000) | EN_LDO;
+ ret |= pmic_reg_write(p, MAX8997_REG_LDO2CTRL, val);
+
+ /* LDO3 VUSB/MIPI: 1.1V */
+ val = max8997_reg_ldo(1100000) | DIS_LDO; /* OFF */
+ ret |= pmic_reg_write(p, MAX8997_REG_LDO3CTRL, val);
+
+ /* LDO4 VMIPI: 1.8V */
+ val = max8997_reg_ldo(1800000) | DIS_LDO; /* OFF */
+ ret |= pmic_reg_write(p, MAX8997_REG_LDO4CTRL, val);
+
+ /* LDO5 VHSIC: 1.2V */
+ val = max8997_reg_ldo(1200000) | DIS_LDO; /* OFF */
+ ret |= pmic_reg_write(p, MAX8997_REG_LDO5CTRL, val);
+
+ /* LDO6 VCC_1.8V_PDA: 1.8V */
+ val = max8997_reg_ldo(1800000) | EN_LDO;
+ ret |= pmic_reg_write(p, MAX8997_REG_LDO6CTRL, val);
+
+ /* LDO7 CAM_ISP: 1.8V */
+ val = max8997_reg_ldo(1800000) | DIS_LDO; /* OFF */
+ ret |= pmic_reg_write(p, MAX8997_REG_LDO7CTRL, val);
+
+ /* LDO8 VDAC/VUSB: 3.3V */
+ val = max8997_reg_ldo(3300000) | DIS_LDO; /* OFF */
+ ret |= pmic_reg_write(p, MAX8997_REG_LDO8CTRL, val);
+
+ /* LDO9 VCC_2.8V_PDA: 2.8V */
+ val = max8997_reg_ldo(2800000) | EN_LDO;
+ ret |= pmic_reg_write(p, MAX8997_REG_LDO9CTRL, val);
+
+ /* LDO10 VPLL: 1.1V */
+ val = max8997_reg_ldo(1100000) | EN_LDO;
+ ret |= pmic_reg_write(p, MAX8997_REG_LDO10CTRL, val);
+
+ /* LDO11 TOUCH: 2.8V */
+ val = max8997_reg_ldo(2800000) | DIS_LDO; /* OFF */
+ ret |= pmic_reg_write(p, MAX8997_REG_LDO11CTRL, val);
+
+ /* LDO12 VTCAM: 1.8V */
+ val = max8997_reg_ldo(1800000) | DIS_LDO; /* OFF */
+ ret |= pmic_reg_write(p, MAX8997_REG_LDO12CTRL, val);
+
+ /* LDO13 VCC_3.0_LCD: 3.0V */
+ val = max8997_reg_ldo(3000000) | DIS_LDO; /* OFF */
+ ret |= pmic_reg_write(p, MAX8997_REG_LDO13CTRL, val);
+
+ /* LDO14 MOTOR: 3.0V */
+ val = max8997_reg_ldo(3000000) | DIS_LDO; /* OFF */
+ ret |= pmic_reg_write(p, MAX8997_REG_LDO14CTRL, val);
+
+ /* LDO15 LED_A: 2.8V */
+ val = max8997_reg_ldo(2800000) | DIS_LDO; /* OFF */
+ ret |= pmic_reg_write(p, MAX8997_REG_LDO15CTRL, val);
+
+ /* LDO16 CAM_SENSOR: 1.8V */
+ val = max8997_reg_ldo(1800000) | DIS_LDO; /* OFF */
+ ret |= pmic_reg_write(p, MAX8997_REG_LDO16CTRL, val);
+
+ /* LDO17 VTF: 2.8V */
+ val = max8997_reg_ldo(2800000) | DIS_LDO; /* OFF */
+ ret |= pmic_reg_write(p, MAX8997_REG_LDO17CTRL, val);
+
+ /* LDO18 TOUCH_LED 3.3V */
+ val = max8997_reg_ldo(3300000) | DIS_LDO; /* OFF */
+ ret |= pmic_reg_write(p, MAX8997_REG_LDO18CTRL, val);
+
+ /* LDO21 VDDQ: 1.2V */
+ val = max8997_reg_ldo(1200000) | EN_LDO;
+ ret |= pmic_reg_write(p, MAX8997_REG_LDO21CTRL, val);
+
+ /* SAFEOUT for both 1 and 2: 4.9V, Active discharge, Enable */
+ val = (SAFEOUT_4_90V << 0) | (SAFEOUT_4_90V << 2) |
+ ACTDISSAFEO1 | ACTDISSAFEO2 | ENSAFEOUT1 | ENSAFEOUT2;
+ ret |= pmic_reg_write(p, MAX8997_REG_SAFEOUTCTRL, val);
+
+ if (ret) {
+ puts("MAX8997 PMIC setting error!\n");
+ return -1;
+ }
+ return 0;
+}
+
+int exynos_power_init(void)
+{
+ int chrg, ret;
+ struct power_battery *pb;
+ struct pmic *p_fg, *p_chrg, *p_muic, *p_bat;
+
+ /*
+ * For PMIC/MUIC the I2C bus is named as I2C5, but it is connected
+ * to logical I2C adapter 0
+ *
+ * The FUEL_GAUGE is marked as I2C9 on the schematic, but connected
+ * to logical I2C adapter 1
+ */
+ ret = pmic_init(I2C_5);
+ ret |= pmic_init_max8997();
+ ret |= power_fg_init(I2C_9);
+ ret |= power_muic_init(I2C_5);
+ ret |= power_bat_init(0);
+ if (ret)
+ return ret;
+
+ p_fg = pmic_get("MAX17042_FG");
+ if (!p_fg) {
+ puts("MAX17042_FG: Not found\n");
+ return -ENODEV;
+ }
+
+ p_chrg = pmic_get("MAX8997_PMIC");
+ if (!p_chrg) {
+ puts("MAX8997_PMIC: Not found\n");
+ return -ENODEV;
+ }
+
+ p_muic = pmic_get("MAX8997_MUIC");
+ if (!p_muic) {
+ puts("MAX8997_MUIC: Not found\n");
+ return -ENODEV;
+ }
+
+ p_bat = pmic_get("BAT_TRATS");
+ if (!p_bat) {
+ puts("BAT_TRATS: Not found\n");
+ return -ENODEV;
+ }
+
+ p_fg->parent = p_bat;
+ p_chrg->parent = p_bat;
+ p_muic->parent = p_bat;
+
+ p_bat->low_power_mode = trats_low_power_mode;
+ p_bat->pbat->battery_init(p_bat, p_fg, p_chrg, p_muic);
+
+ pb = p_bat->pbat;
+ chrg = p_muic->chrg->chrg_type(p_muic);
+ debug("CHARGER TYPE: %d\n", chrg);
+
+ if (!p_chrg->chrg->chrg_bat_present(p_chrg)) {
+ puts("No battery detected\n");
+ return -1;
+ }
+
+ p_fg->fg->fg_battery_check(p_fg, p_bat);
+
+ if (pb->bat->state == CHARGE && chrg == CHARGER_USB)
+ puts("CHARGE Battery !\n");
+
+ return 0;
+}
+
+static unsigned int get_hw_revision(void)
+{
+ struct exynos4_gpio_part1 *gpio =
+ (struct exynos4_gpio_part1 *)samsung_get_base_gpio_part1();
+ int hwrev = 0;
+ int i;
+
+ /* hw_rev[3:0] == GPE1[3:0] */
+ for (i = 0; i < 4; i++) {
+ s5p_gpio_cfg_pin(&gpio->e1, i, GPIO_INPUT);
+ s5p_gpio_set_pull(&gpio->e1, i, GPIO_PULL_NONE);
+ }
+
+ udelay(1);
+
+ for (i = 0; i < 4; i++)
+ hwrev |= (s5p_gpio_get_value(&gpio->e1, i) << i);
+
+ debug("hwrev 0x%x\n", hwrev);
+
+ return hwrev;
+}
+
+static void check_hw_revision(void)
+{
+ int hwrev;
+
+ hwrev = get_hw_revision();
+
+ board_rev |= hwrev;
+}
+
+
+#ifdef CONFIG_USB_GADGET
+static int s5pc210_phy_control(int on)
+{
+ int ret = 0;
+ u32 val = 0;
+ struct pmic *p = pmic_get("MAX8997_PMIC");
+ if (!p)
+ return -ENODEV;
+
+ if (pmic_probe(p))
+ return -1;
+
+ if (on) {
+ ret |= pmic_set_output(p, MAX8997_REG_SAFEOUTCTRL,
+ ENSAFEOUT1, LDO_ON);
+ ret |= pmic_reg_read(p, MAX8997_REG_LDO3CTRL, &val);
+ ret |= pmic_reg_write(p, MAX8997_REG_LDO3CTRL, EN_LDO | val);
+
+ ret |= pmic_reg_read(p, MAX8997_REG_LDO8CTRL, &val);
+ ret |= pmic_reg_write(p, MAX8997_REG_LDO8CTRL, EN_LDO | val);
+ } else {
+ ret |= pmic_reg_read(p, MAX8997_REG_LDO8CTRL, &val);
+ ret |= pmic_reg_write(p, MAX8997_REG_LDO8CTRL, DIS_LDO | val);
+
+ ret |= pmic_reg_read(p, MAX8997_REG_LDO3CTRL, &val);
+ ret |= pmic_reg_write(p, MAX8997_REG_LDO3CTRL, DIS_LDO | val);
+ ret |= pmic_set_output(p, MAX8997_REG_SAFEOUTCTRL,
+ ENSAFEOUT1, LDO_OFF);
+ }
+
+ if (ret) {
+ puts("MAX8997 LDO setting error!\n");
+ return -1;
+ }
+
+ return 0;
+}
+
+struct s3c_plat_otg_data s5pc210_otg_data = {
+ .phy_control = s5pc210_phy_control,
+ .regs_phy = EXYNOS4_USBPHY_BASE,
+ .regs_otg = EXYNOS4_USBOTG_BASE,
+ .usb_phy_ctrl = EXYNOS4_USBPHY_CONTROL,
+ .usb_flags = PHY0_SLEEP,
+};
+
+int board_usb_init(int index, enum usb_init_type init)
+{
+ debug("USB_udc_probe\n");
+ return s3c_udc_probe(&s5pc210_otg_data);
+}
+
+int g_dnl_board_usb_cable_connected(void)
+{
+ struct pmic *muic = pmic_get("MAX8997_MUIC");
+ if (!muic)
+ return 0;
+
+ return !!muic->chrg->chrg_type(muic);
+}
+#endif
+
+static void pmic_reset(void)
+{
+ struct exynos4_gpio_part2 *gpio =
+ (struct exynos4_gpio_part2 *)samsung_get_base_gpio_part2();
+
+ s5p_gpio_direction_output(&gpio->x0, 7, 1);
+ s5p_gpio_set_pull(&gpio->x2, 7, GPIO_PULL_NONE);
+}
+
+static void board_clock_init(void)
+{
+ struct exynos4_clock *clk =
+ (struct exynos4_clock *)samsung_get_base_clock();
+
+ writel(CLK_SRC_CPU_VAL, (unsigned int)&clk->src_cpu);
+ writel(CLK_SRC_TOP0_VAL, (unsigned int)&clk->src_top0);
+ writel(CLK_SRC_FSYS_VAL, (unsigned int)&clk->src_fsys);
+ writel(CLK_SRC_PERIL0_VAL, (unsigned int)&clk->src_peril0);
+
+ writel(CLK_DIV_CPU0_VAL, (unsigned int)&clk->div_cpu0);
+ writel(CLK_DIV_CPU1_VAL, (unsigned int)&clk->div_cpu1);
+ writel(CLK_DIV_DMC0_VAL, (unsigned int)&clk->div_dmc0);
+ writel(CLK_DIV_DMC1_VAL, (unsigned int)&clk->div_dmc1);
+ writel(CLK_DIV_LEFTBUS_VAL, (unsigned int)&clk->div_leftbus);
+ writel(CLK_DIV_RIGHTBUS_VAL, (unsigned int)&clk->div_rightbus);
+ writel(CLK_DIV_TOP_VAL, (unsigned int)&clk->div_top);
+ writel(CLK_DIV_FSYS1_VAL, (unsigned int)&clk->div_fsys1);
+ writel(CLK_DIV_FSYS2_VAL, (unsigned int)&clk->div_fsys2);
+ writel(CLK_DIV_FSYS3_VAL, (unsigned int)&clk->div_fsys3);
+ writel(CLK_DIV_PERIL0_VAL, (unsigned int)&clk->div_peril0);
+ writel(CLK_DIV_PERIL3_VAL, (unsigned int)&clk->div_peril3);
+
+ writel(PLL_LOCKTIME, (unsigned int)&clk->apll_lock);
+ writel(PLL_LOCKTIME, (unsigned int)&clk->mpll_lock);
+ writel(PLL_LOCKTIME, (unsigned int)&clk->epll_lock);
+ writel(PLL_LOCKTIME, (unsigned int)&clk->vpll_lock);
+ writel(APLL_CON1_VAL, (unsigned int)&clk->apll_con1);
+ writel(APLL_CON0_VAL, (unsigned int)&clk->apll_con0);
+ writel(MPLL_CON1_VAL, (unsigned int)&clk->mpll_con1);
+ writel(MPLL_CON0_VAL, (unsigned int)&clk->mpll_con0);
+ writel(EPLL_CON1_VAL, (unsigned int)&clk->epll_con1);
+ writel(EPLL_CON0_VAL, (unsigned int)&clk->epll_con0);
+ writel(VPLL_CON1_VAL, (unsigned int)&clk->vpll_con1);
+ writel(VPLL_CON0_VAL, (unsigned int)&clk->vpll_con0);
+
+ writel(CLK_GATE_IP_CAM_VAL, (unsigned int)&clk->gate_ip_cam);
+ writel(CLK_GATE_IP_VP_VAL, (unsigned int)&clk->gate_ip_tv);
+ writel(CLK_GATE_IP_MFC_VAL, (unsigned int)&clk->gate_ip_mfc);
+ writel(CLK_GATE_IP_G3D_VAL, (unsigned int)&clk->gate_ip_g3d);
+ writel(CLK_GATE_IP_IMAGE_VAL, (unsigned int)&clk->gate_ip_image);
+ writel(CLK_GATE_IP_LCD0_VAL, (unsigned int)&clk->gate_ip_lcd0);
+ writel(CLK_GATE_IP_LCD1_VAL, (unsigned int)&clk->gate_ip_lcd1);
+ writel(CLK_GATE_IP_FSYS_VAL, (unsigned int)&clk->gate_ip_fsys);
+ writel(CLK_GATE_IP_GPS_VAL, (unsigned int)&clk->gate_ip_gps);
+ writel(CLK_GATE_IP_PERIL_VAL, (unsigned int)&clk->gate_ip_peril);
+ writel(CLK_GATE_IP_PERIR_VAL, (unsigned int)&clk->gate_ip_perir);
+ writel(CLK_GATE_BLOCK_VAL, (unsigned int)&clk->gate_block);
+}
+
+static void board_power_init(void)
+{
+ struct exynos4_power *pwr =
+ (struct exynos4_power *)samsung_get_base_power();
+
+ /* PS HOLD */
+ writel(EXYNOS4_PS_HOLD_CON_VAL, (unsigned int)&pwr->ps_hold_control);
+
+ /* Set power down */
+ writel(0, (unsigned int)&pwr->cam_configuration);
+ writel(0, (unsigned int)&pwr->tv_configuration);
+ writel(0, (unsigned int)&pwr->mfc_configuration);
+ writel(0, (unsigned int)&pwr->g3d_configuration);
+ writel(0, (unsigned int)&pwr->lcd1_configuration);
+ writel(0, (unsigned int)&pwr->gps_configuration);
+ writel(0, (unsigned int)&pwr->gps_alive_configuration);
+
+ /* It is necessary to power down core 1 */
+ /* to successfully boot CPU1 in kernel */
+ writel(0, (unsigned int)&pwr->arm_core1_configuration);
+}
+
+static void exynos_uart_init(void)
+{
+ struct exynos4_gpio_part2 *gpio2 =
+ (struct exynos4_gpio_part2 *)samsung_get_base_gpio_part2();
+
+ /* UART_SEL GPY4[7] (part2) at EXYNOS4 */
+ s5p_gpio_set_pull(&gpio2->y4, 7, GPIO_PULL_UP);
+ s5p_gpio_direction_output(&gpio2->y4, 7, 1);
+}
+
+int exynos_early_init_f(void)
+{
+ wdt_stop();
+ pmic_reset();
+ board_clock_init();
+ exynos_uart_init();
+ board_power_init();
+
+ return 0;
+}
+
+void exynos_reset_lcd(void)
+{
+ struct exynos4_gpio_part2 *gpio2 =
+ (struct exynos4_gpio_part2 *)samsung_get_base_gpio_part2();
+
+ s5p_gpio_direction_output(&gpio2->y4, 5, 1);
+ udelay(10000);
+ s5p_gpio_direction_output(&gpio2->y4, 5, 0);
+ udelay(10000);
+ s5p_gpio_direction_output(&gpio2->y4, 5, 1);
+}
+
+int lcd_power(void)
+{
+ int ret = 0;
+ struct pmic *p = pmic_get("MAX8997_PMIC");
+ if (!p)
+ return -ENODEV;
+
+ if (pmic_probe(p))
+ return 0;
+
+ /* LDO15 voltage: 2.2v */
+ ret |= pmic_reg_write(p, MAX8997_REG_LDO15CTRL, 0x1c | EN_LDO);
+ /* LDO13 voltage: 3.0v */
+ ret |= pmic_reg_write(p, MAX8997_REG_LDO13CTRL, 0x2c | EN_LDO);
+
+ if (ret) {
+ puts("MAX8997 LDO setting error!\n");
+ return -1;
+ }
+
+ return 0;
+}
+
+int mipi_power(void)
+{
+ int ret = 0;
+ struct pmic *p = pmic_get("MAX8997_PMIC");
+ if (!p)
+ return -ENODEV;
+
+ if (pmic_probe(p))
+ return 0;
+
+ /* LDO3 voltage: 1.1v */
+ ret |= pmic_reg_write(p, MAX8997_REG_LDO3CTRL, 0x6 | EN_LDO);
+ /* LDO4 voltage: 1.8v */
+ ret |= pmic_reg_write(p, MAX8997_REG_LDO4CTRL, 0x14 | EN_LDO);
+
+ if (ret) {
+ puts("MAX8997 LDO setting error!\n");
+ return -1;
+ }
+
+ return 0;
+}
+
+void exynos_lcd_misc_init(vidinfo_t *vid)
+{
+#ifdef CONFIG_TIZEN
+ get_tizen_logo_info(vid);
+#endif
+#ifdef CONFIG_S6E8AX0
+ s6e8ax0_init();
+ setenv("lcdinfo", "lcd=s6e8ax0");
+#endif
+}
Code Review / kvmfornfv.git / blobdiff