Add qemu 2.4.0
[kvmfornfv.git] / qemu / roms / u-boot / board / ronetix / pm9261 / pm9261.c
diff --git a/qemu/roms/u-boot/board/ronetix/pm9261/pm9261.c b/qemu/roms/u-boot/board/ronetix/pm9261/pm9261.c
new file mode 100644 (file)
index 0000000..ec3ac89
--- /dev/null
@@ -0,0 +1,311 @@
+/*
+ * (C) Copyright 2007-2008
+ * Stelian Pop <stelian@popies.net>
+ * Lead Tech Design <www.leadtechdesign.com>
+ * Copyright (C) 2008 Ronetix Ilko Iliev (www.ronetix.at)
+ * Copyright (C) 2009 Jean-Christopher PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+ *
+ * SPDX-License-Identifier:    GPL-2.0+
+ */
+
+#include <common.h>
+#include <linux/sizes.h>
+#include <asm/io.h>
+#include <asm/gpio.h>
+#include <asm/arch/at91sam9_smc.h>
+#include <asm/arch/at91_common.h>
+#include <asm/arch/at91_pmc.h>
+#include <asm/arch/at91_rstc.h>
+#include <asm/arch/at91_matrix.h>
+#include <asm/arch/clk.h>
+#include <asm/arch/gpio.h>
+
+#include <lcd.h>
+#include <atmel_lcdc.h>
+#include <dataflash.h>
+#if defined(CONFIG_RESET_PHY_R) && defined(CONFIG_DRIVER_DM9000)
+#include <net.h>
+#endif
+#include <netdev.h>
+
+DECLARE_GLOBAL_DATA_PTR;
+
+/* ------------------------------------------------------------------------- */
+/*
+ * Miscelaneous platform dependent initialisations
+ */
+
+#ifdef CONFIG_CMD_NAND
+static void pm9261_nand_hw_init(void)
+{
+       unsigned long csa;
+       struct at91_smc *smc = (struct at91_smc *)ATMEL_BASE_SMC;
+       struct at91_matrix *matrix = (struct at91_matrix *)ATMEL_BASE_MATRIX;
+       struct at91_pmc *pmc = (struct at91_pmc *)ATMEL_BASE_PMC;
+
+       /* Enable CS3 */
+       csa = readl(&matrix->csa) | AT91_MATRIX_CSA_EBI_CS3A;
+       writel(csa, &matrix->csa);
+
+       /* Configure SMC CS3 for NAND/SmartMedia */
+       writel(AT91_SMC_SETUP_NWE(1) | AT91_SMC_SETUP_NCS_WR(0) |
+               AT91_SMC_SETUP_NRD(1) | AT91_SMC_SETUP_NCS_RD(0),
+               &smc->cs[3].setup);
+
+       writel(AT91_SMC_PULSE_NWE(3) | AT91_SMC_PULSE_NCS_WR(3) |
+               AT91_SMC_PULSE_NRD(3) | AT91_SMC_PULSE_NCS_RD(3),
+               &smc->cs[3].pulse);
+
+       writel(AT91_SMC_CYCLE_NWE(5) | AT91_SMC_CYCLE_NRD(5),
+               &smc->cs[3].cycle);
+
+       writel(AT91_SMC_MODE_RM_NRD | AT91_SMC_MODE_WM_NWE |
+               AT91_SMC_MODE_EXNW_DISABLE |
+#ifdef CONFIG_SYS_NAND_DBW_16
+               AT91_SMC_MODE_DBW_16 |
+#else /* CONFIG_SYS_NAND_DBW_8 */
+               AT91_SMC_MODE_DBW_8 |
+#endif
+               AT91_SMC_MODE_TDF_CYCLE(2),
+               &smc->cs[3].mode);
+
+       writel(1 << ATMEL_ID_PIOA |
+               1 << ATMEL_ID_PIOC,
+               &pmc->pcer);
+
+       /* Configure RDY/BSY */
+       gpio_direction_input(CONFIG_SYS_NAND_READY_PIN);
+
+       /* Enable NandFlash */
+       gpio_direction_output(CONFIG_SYS_NAND_ENABLE_PIN, 1);
+
+       at91_set_a_periph(AT91_PIO_PORTC, 0, 0);        /* NANDOE */
+       at91_set_a_periph(AT91_PIO_PORTC, 1, 0);        /* NANDWE */
+}
+#endif
+
+
+#ifdef CONFIG_DRIVER_DM9000
+static void pm9261_dm9000_hw_init(void)
+{
+       struct at91_smc *smc = (struct at91_smc *)ATMEL_BASE_SMC;
+       struct at91_pmc *pmc = (struct at91_pmc *)ATMEL_BASE_PMC;
+
+       /* Configure SMC CS2 for DM9000 */
+       writel(AT91_SMC_SETUP_NWE(2) | AT91_SMC_SETUP_NCS_WR(0) |
+               AT91_SMC_SETUP_NRD(2) | AT91_SMC_SETUP_NCS_RD(0),
+               &smc->cs[2].setup);
+
+       writel(AT91_SMC_PULSE_NWE(4) | AT91_SMC_PULSE_NCS_WR(8) |
+               AT91_SMC_PULSE_NRD(4) | AT91_SMC_PULSE_NCS_RD(8),
+               &smc->cs[2].pulse);
+
+       writel(AT91_SMC_CYCLE_NWE(16) | AT91_SMC_CYCLE_NRD(16),
+               &smc->cs[2].cycle);
+
+       writel(AT91_SMC_MODE_RM_NRD | AT91_SMC_MODE_WM_NWE |
+               AT91_SMC_MODE_EXNW_DISABLE |
+               AT91_SMC_MODE_BAT | AT91_SMC_MODE_DBW_16 |
+               AT91_SMC_MODE_TDF_CYCLE(1),
+               &smc->cs[2].mode);
+
+       /* Configure Interrupt pin as input, no pull-up */
+       writel(1 << ATMEL_ID_PIOA, &pmc->pcer);
+       at91_set_pio_input(AT91_PIO_PORTA, 24, 0);
+}
+#endif
+
+#ifdef CONFIG_LCD
+vidinfo_t panel_info = {
+       vl_col:         240,
+       vl_row:         320,
+       vl_clk:         4965000,
+       vl_sync:        ATMEL_LCDC_INVLINE_INVERTED |
+                       ATMEL_LCDC_INVFRAME_INVERTED,
+       vl_bpix:        3,
+       vl_tft:         1,
+       vl_hsync_len:   5,
+       vl_left_margin: 1,
+       vl_right_margin:33,
+       vl_vsync_len:   1,
+       vl_upper_margin:1,
+       vl_lower_margin:0,
+       mmio:           ATMEL_BASE_LCDC,
+};
+
+void lcd_enable(void)
+{
+       at91_set_pio_value(AT91_PIO_PORTA, 22, 0);  /* power up */
+}
+
+void lcd_disable(void)
+{
+       at91_set_pio_value(AT91_PIO_PORTA, 22, 1);  /* power down */
+}
+
+static void pm9261_lcd_hw_init(void)
+{
+       struct at91_pmc *pmc = (struct at91_pmc *)ATMEL_BASE_PMC;
+
+       at91_set_a_periph(AT91_PIO_PORTB, 1, 0);        /* LCDHSYNC */
+       at91_set_a_periph(AT91_PIO_PORTB, 2, 0);        /* LCDDOTCK */
+       at91_set_a_periph(AT91_PIO_PORTB, 3, 0);        /* LCDDEN */
+       at91_set_a_periph(AT91_PIO_PORTB, 4, 0);        /* LCDCC */
+       at91_set_a_periph(AT91_PIO_PORTB, 7, 0);        /* LCDD2 */
+       at91_set_a_periph(AT91_PIO_PORTB, 8, 0);        /* LCDD3 */
+       at91_set_a_periph(AT91_PIO_PORTB, 9, 0);        /* LCDD4 */
+       at91_set_a_periph(AT91_PIO_PORTB, 10, 0);       /* LCDD5 */
+       at91_set_a_periph(AT91_PIO_PORTB, 11, 0);       /* LCDD6 */
+       at91_set_a_periph(AT91_PIO_PORTB, 12, 0);       /* LCDD7 */
+       at91_set_a_periph(AT91_PIO_PORTB, 15, 0);       /* LCDD10 */
+       at91_set_a_periph(AT91_PIO_PORTB, 16, 0);       /* LCDD11 */
+       at91_set_a_periph(AT91_PIO_PORTB, 17, 0);       /* LCDD12 */
+       at91_set_a_periph(AT91_PIO_PORTB, 18, 0);       /* LCDD13 */
+       at91_set_a_periph(AT91_PIO_PORTB, 19, 0);       /* LCDD14 */
+       at91_set_a_periph(AT91_PIO_PORTB, 20, 0);       /* LCDD15 */
+       at91_set_b_periph(AT91_PIO_PORTB, 23, 0);       /* LCDD18 */
+       at91_set_b_periph(AT91_PIO_PORTB, 24, 0);       /* LCDD19 */
+       at91_set_b_periph(AT91_PIO_PORTB, 25, 0);       /* LCDD20 */
+       at91_set_b_periph(AT91_PIO_PORTB, 26, 0);       /* LCDD21 */
+       at91_set_b_periph(AT91_PIO_PORTB, 27, 0);       /* LCDD22 */
+       at91_set_b_periph(AT91_PIO_PORTB, 28, 0);       /* LCDD23 */
+
+       writel(1 << 17, &pmc->scer); /* LCD controller Clock, AT91SAM9261 only */
+
+       gd->fb_base = ATMEL_BASE_SRAM;
+}
+
+#ifdef CONFIG_LCD_INFO
+#include <nand.h>
+#include <version.h>
+
+extern flash_info_t flash_info[];
+
+void lcd_show_board_info(void)
+{
+       ulong dram_size, nand_size, flash_size, dataflash_size;
+       int i;
+       char temp[32];
+
+       lcd_printf ("%s\n", U_BOOT_VERSION);
+       lcd_printf ("(C) 2009 Ronetix GmbH\n");
+       lcd_printf ("support@ronetix.at\n");
+       lcd_printf ("%s CPU at %s MHz",
+               CONFIG_SYS_AT91_CPU_NAME,
+               strmhz(temp, get_cpu_clk_rate()));
+
+       dram_size = 0;
+       for (i = 0; i < CONFIG_NR_DRAM_BANKS; i++)
+               dram_size += gd->bd->bi_dram[i].size;
+
+       nand_size = 0;
+       for (i = 0; i < CONFIG_SYS_MAX_NAND_DEVICE; i++)
+               nand_size += nand_info[i].size;
+
+       flash_size = 0;
+       for (i = 0; i < CONFIG_SYS_MAX_FLASH_BANKS; i++)
+               flash_size += flash_info[i].size;
+
+       dataflash_size = 0;
+       for (i = 0; i < CONFIG_SYS_MAX_DATAFLASH_BANKS; i++)
+               dataflash_size += (unsigned int) dataflash_info[i].Device.pages_number *
+                               dataflash_info[i].Device.pages_size;
+
+       lcd_printf ("%ld MB SDRAM, %ld MB NAND\n%ld MB NOR Flash\n"
+                       "%ld MB DataFlash\n",
+               dram_size >> 20,
+               nand_size >> 20,
+               flash_size >> 20,
+               dataflash_size >> 20);
+}
+#endif /* CONFIG_LCD_INFO */
+
+#endif /* CONFIG_LCD */
+
+int board_early_init_f(void)
+{
+       struct at91_pmc *pmc = (struct at91_pmc *)ATMEL_BASE_PMC;
+
+       /* Enable clocks for some PIOs */
+       writel(1 << ATMEL_ID_PIOA |
+               1 << ATMEL_ID_PIOC,
+               &pmc->pcer);
+
+       at91_seriald_hw_init();
+
+       return 0;
+}
+
+int board_init(void)
+{
+       /* arch number of PM9261-Board */
+       gd->bd->bi_arch_number = MACH_TYPE_PM9261;
+
+       /* adress of boot parameters */
+       gd->bd->bi_boot_params = PHYS_SDRAM + 0x100;
+
+#ifdef CONFIG_CMD_NAND
+       pm9261_nand_hw_init();
+#endif
+#ifdef CONFIG_HAS_DATAFLASH
+       at91_spi0_hw_init(1 << 0);
+#endif
+#ifdef CONFIG_DRIVER_DM9000
+       pm9261_dm9000_hw_init();
+#endif
+#ifdef CONFIG_LCD
+       pm9261_lcd_hw_init();
+#endif
+       return 0;
+}
+
+#ifdef CONFIG_DRIVER_DM9000
+int board_eth_init(bd_t *bis)
+{
+       return dm9000_initialize(bis);
+}
+#endif
+
+int dram_init(void)
+{
+       /* dram_init must store complete ramsize in gd->ram_size */
+       gd->ram_size = get_ram_size((void *)PHYS_SDRAM,
+                               PHYS_SDRAM_SIZE);
+       return 0;
+}
+
+void dram_init_banksize(void)
+{
+       gd->bd->bi_dram[0].start = PHYS_SDRAM;
+       gd->bd->bi_dram[0].size = PHYS_SDRAM_SIZE;
+}
+
+#ifdef CONFIG_RESET_PHY_R
+void reset_phy(void)
+{
+#ifdef CONFIG_DRIVER_DM9000
+       /*
+        * Initialize ethernet HW addr prior to starting Linux,
+        * needed for nfsroot
+        */
+       eth_init(gd->bd);
+#endif
+}
+#endif
+
+#ifdef CONFIG_DISPLAY_BOARDINFO
+int checkboard (void)
+{
+       char buf[32];
+
+       printf ("Board : Ronetix PM9261\n");
+       printf ("Crystal frequency: %8s MHz\n",
+                                       strmhz(buf, get_main_clk_rate()));
+       printf ("CPU clock        : %8s MHz\n",
+                                       strmhz(buf, get_cpu_clk_rate()));
+       printf ("Master clock     : %8s MHz\n",
+                                       strmhz(buf, get_mck_clk_rate()));
+
+       return 0;
+}
+#endif