--- /dev/null
+/*
+ * Copyright (C) 2011 Renesas Solutions Corp.
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#include <common.h>
+#include <malloc.h>
+#include <asm/processor.h>
+#include <asm/io.h>
+#include <asm/mmc.h>
+#include <spi_flash.h>
+
+int checkboard(void)
+{
+ puts("BOARD: R0P7757LC0030RL board\n");
+
+ return 0;
+}
+
+static void init_gctrl(void)
+{
+ struct gctrl_regs *gctrl = GCTRL_BASE;
+ unsigned long graofst;
+
+ graofst = (SH7757LCR_SDRAM_PHYS_TOP + SH7757LCR_GRA_OFFSET) >> 24;
+ writel(graofst | 0x20000f00, &gctrl->gracr3);
+}
+
+static int init_pcie_bridge_from_spi(void *buf, size_t size)
+{
+ struct spi_flash *spi;
+ int ret;
+ unsigned long pcie_addr;
+
+ spi = spi_flash_probe(0, 0, 1000000, SPI_MODE_3);
+ if (!spi) {
+ printf("%s: spi_flash probe error.\n", __func__);
+ return 1;
+ }
+
+ if (is_sh7757_b0())
+ pcie_addr = SH7757LCR_PCIEBRG_ADDR_B0;
+ else
+ pcie_addr = SH7757LCR_PCIEBRG_ADDR;
+
+ ret = spi_flash_read(spi, pcie_addr, size, buf);
+ if (ret) {
+ printf("%s: spi_flash read error.\n", __func__);
+ spi_flash_free(spi);
+ return 1;
+ }
+ spi_flash_free(spi);
+
+ return 0;
+}
+
+static void init_pcie_bridge(void)
+{
+ struct pciebrg_regs *pciebrg = PCIEBRG_BASE;
+ struct pcie_setup_regs *pcie_setup = PCIE_SETUP_BASE;
+ int i;
+ unsigned char *data;
+ unsigned short tmp;
+ unsigned long pcie_size;
+
+ if (!(readw(&pciebrg->ctrl_h8s) & 0x0001))
+ return;
+
+ if (is_sh7757_b0())
+ pcie_size = SH7757LCR_PCIEBRG_SIZE_B0;
+ else
+ pcie_size = SH7757LCR_PCIEBRG_SIZE;
+
+ data = malloc(pcie_size);
+ if (!data) {
+ printf("%s: malloc error.\n", __func__);
+ return;
+ }
+ if (init_pcie_bridge_from_spi(data, pcie_size)) {
+ free(data);
+ return;
+ }
+
+ if (data[0] == 0xff && data[1] == 0xff && data[2] == 0xff &&
+ data[3] == 0xff) {
+ free(data);
+ printf("%s: skipped initialization\n", __func__);
+ return;
+ }
+
+ writew(0xa501, &pciebrg->ctrl_h8s); /* reset */
+ writew(0x0000, &pciebrg->cp_ctrl);
+ writew(0x0000, &pciebrg->cp_addr);
+
+ for (i = 0; i < pcie_size; i += 2) {
+ tmp = (data[i] << 8) | data[i + 1];
+ writew(tmp, &pciebrg->cp_data);
+ }
+
+ writew(0xa500, &pciebrg->ctrl_h8s); /* start */
+ if (!is_sh7757_b0())
+ writel(0x00000001, &pcie_setup->pbictl3);
+
+ free(data);
+}
+
+static void init_usb_phy(void)
+{
+ struct usb_common_regs *common0 = USB0_COMMON_BASE;
+ struct usb_common_regs *common1 = USB1_COMMON_BASE;
+ struct usb0_phy_regs *phy = USB0_PHY_BASE;
+ struct usb1_port_regs *port = USB1_PORT_BASE;
+ struct usb1_alignment_regs *align = USB1_ALIGNMENT_BASE;
+
+ writew(0x0100, &phy->reset); /* set reset */
+ /* port0 = USB0, port1 = USB1 */
+ writew(0x0002, &phy->portsel);
+ writel(0x0001, &port->port1sel); /* port1 = Host */
+ writew(0x0111, &phy->reset); /* clear reset */
+
+ writew(0x4000, &common0->suspmode);
+ writew(0x4000, &common1->suspmode);
+
+#if defined(__LITTLE_ENDIAN)
+ writel(0x00000000, &align->ehcidatac);
+ writel(0x00000000, &align->ohcidatac);
+#endif
+}
+
+static void set_mac_to_sh_eth_register(int channel, char *mac_string)
+{
+ struct ether_mac_regs *ether;
+ unsigned char mac[6];
+ unsigned long val;
+
+ eth_parse_enetaddr(mac_string, mac);
+
+ if (!channel)
+ ether = ETHER0_MAC_BASE;
+ else
+ ether = ETHER1_MAC_BASE;
+
+ val = (mac[0] << 24) | (mac[1] << 16) | (mac[2] << 8) | mac[3];
+ writel(val, ðer->mahr);
+ val = (mac[4] << 8) | mac[5];
+ writel(val, ðer->malr);
+}
+
+static void set_mac_to_sh_giga_eth_register(int channel, char *mac_string)
+{
+ struct ether_mac_regs *ether;
+ unsigned char mac[6];
+ unsigned long val;
+
+ eth_parse_enetaddr(mac_string, mac);
+
+ if (!channel)
+ ether = GETHER0_MAC_BASE;
+ else
+ ether = GETHER1_MAC_BASE;
+
+ val = (mac[0] << 24) | (mac[1] << 16) | (mac[2] << 8) | mac[3];
+ writel(val, ðer->mahr);
+ val = (mac[4] << 8) | mac[5];
+ writel(val, ðer->malr);
+}
+
+/*****************************************************************
+ * This PMB must be set on this timing. The lowlevel_init is run on
+ * Area 0(phys 0x00000000), so we have to map it.
+ *
+ * The new PMB table is following:
+ * ent virt phys v sz c wt
+ * 0 0xa0000000 0x40000000 1 128M 0 1
+ * 1 0xa8000000 0x48000000 1 128M 0 1
+ * 2 0xb0000000 0x50000000 1 128M 0 1
+ * 3 0xb8000000 0x58000000 1 128M 0 1
+ * 4 0x80000000 0x40000000 1 128M 1 1
+ * 5 0x88000000 0x48000000 1 128M 1 1
+ * 6 0x90000000 0x50000000 1 128M 1 1
+ * 7 0x98000000 0x58000000 1 128M 1 1
+ */
+static void set_pmb_on_board_init(void)
+{
+ struct mmu_regs *mmu = MMU_BASE;
+
+ /* clear ITLB */
+ writel(0x00000004, &mmu->mmucr);
+
+ /* delete PMB for SPIBOOT */
+ writel(0, PMB_ADDR_BASE(0));
+ writel(0, PMB_DATA_BASE(0));
+
+ /* add PMB for SDRAM(0x40000000 - 0x47ffffff) */
+ /* ppn ub v s1 s0 c wt */
+ writel(mk_pmb_addr_val(0xa0), PMB_ADDR_BASE(0));
+ writel(mk_pmb_data_val(0x40, 1, 1, 1, 0, 0, 1), PMB_DATA_BASE(0));
+ writel(mk_pmb_addr_val(0xb0), PMB_ADDR_BASE(2));
+ writel(mk_pmb_data_val(0x50, 1, 1, 1, 0, 0, 1), PMB_DATA_BASE(2));
+ writel(mk_pmb_addr_val(0xb8), PMB_ADDR_BASE(3));
+ writel(mk_pmb_data_val(0x58, 1, 1, 1, 0, 0, 1), PMB_DATA_BASE(3));
+ writel(mk_pmb_addr_val(0x80), PMB_ADDR_BASE(4));
+ writel(mk_pmb_data_val(0x40, 0, 1, 1, 0, 1, 1), PMB_DATA_BASE(4));
+ writel(mk_pmb_addr_val(0x90), PMB_ADDR_BASE(6));
+ writel(mk_pmb_data_val(0x50, 0, 1, 1, 0, 1, 1), PMB_DATA_BASE(6));
+ writel(mk_pmb_addr_val(0x98), PMB_ADDR_BASE(7));
+ writel(mk_pmb_data_val(0x58, 0, 1, 1, 0, 1, 1), PMB_DATA_BASE(7));
+}
+
+int board_init(void)
+{
+ struct gether_control_regs *gether = GETHER_CONTROL_BASE;
+
+ set_pmb_on_board_init();
+
+ /* enable RMII's MDIO (disable GRMII's MDIO) */
+ writel(0x00030000, &gether->gbecont);
+
+ init_gctrl();
+ init_usb_phy();
+
+ return 0;
+}
+
+int dram_init(void)
+{
+ DECLARE_GLOBAL_DATA_PTR;
+
+ gd->bd->bi_memstart = CONFIG_SYS_SDRAM_BASE;
+ gd->bd->bi_memsize = CONFIG_SYS_SDRAM_SIZE;
+ printf("DRAM: %dMB\n", CONFIG_SYS_SDRAM_SIZE / (1024 * 1024));
+ printf(" Physical address\n");
+ printf(" 0x%08x - 0x%08x : Accessible Space as ECC Area\n",
+ SH7757LCR_SDRAM_PHYS_TOP,
+ SH7757LCR_SDRAM_PHYS_TOP + SH7757LCR_SDRAM_SIZE - 1);
+ printf(" 0x%08x - 0x%08x : No Access Area\n",
+ SH7757LCR_SDRAM_PHYS_TOP + SH7757LCR_SDRAM_SIZE,
+ SH7757LCR_SDRAM_PHYS_TOP + SH7757LCR_SDRAM_SIZE * 2 - 1);
+ printf(" 0x%08x - 0x%08x : Non-ECC Area for DVC/AVC\n",
+ SH7757LCR_SDRAM_PHYS_TOP + SH7757LCR_SDRAM_ECC_SETTING * 2,
+ SH7757LCR_SDRAM_PHYS_TOP + SH7757LCR_SDRAM_ECC_SETTING * 2 +
+ SH7757LCR_SDRAM_DVC_SIZE - 1);
+ printf(" 0x%08x - 0x%08x : Non-ECC Area for G200eR2\n",
+ SH7757LCR_SDRAM_PHYS_TOP + SH7757LCR_GRA_OFFSET,
+ SH7757LCR_SDRAM_PHYS_TOP + SH7757LCR_GRA_OFFSET + 0x00ffffff);
+
+ return 0;
+}
+
+int board_mmc_init(bd_t *bis)
+{
+ return mmcif_mmc_init();
+}
+
+static int get_sh_eth_mac_raw(unsigned char *buf, int size)
+{
+ struct spi_flash *spi;
+ int ret;
+
+ spi = spi_flash_probe(0, 0, 1000000, SPI_MODE_3);
+ if (spi == NULL) {
+ printf("%s: spi_flash probe error.\n", __func__);
+ return 1;
+ }
+
+ ret = spi_flash_read(spi, SH7757LCR_ETHERNET_MAC_BASE, size, buf);
+ if (ret) {
+ printf("%s: spi_flash read error.\n", __func__);
+ spi_flash_free(spi);
+ return 1;
+ }
+ spi_flash_free(spi);
+
+ return 0;
+}
+
+static int get_sh_eth_mac(int channel, char *mac_string, unsigned char *buf)
+{
+ memcpy(mac_string, &buf[channel * (SH7757LCR_ETHERNET_MAC_SIZE + 1)],
+ SH7757LCR_ETHERNET_MAC_SIZE);
+ mac_string[SH7757LCR_ETHERNET_MAC_SIZE] = 0x00; /* terminate */
+
+ return 0;
+}
+
+static void init_ethernet_mac(void)
+{
+ char mac_string[64];
+ char env_string[64];
+ int i;
+ unsigned char *buf;
+
+ buf = malloc(256);
+ if (!buf) {
+ printf("%s: malloc error.\n", __func__);
+ return;
+ }
+ get_sh_eth_mac_raw(buf, 256);
+
+ /* Fast Ethernet */
+ for (i = 0; i < SH7757LCR_ETHERNET_NUM_CH; i++) {
+ get_sh_eth_mac(i, mac_string, buf);
+ if (i == 0)
+ setenv("ethaddr", mac_string);
+ else {
+ sprintf(env_string, "eth%daddr", i);
+ setenv(env_string, mac_string);
+ }
+
+ set_mac_to_sh_eth_register(i, mac_string);
+ }
+
+ /* Gigabit Ethernet */
+ for (i = 0; i < SH7757LCR_GIGA_ETHERNET_NUM_CH; i++) {
+ get_sh_eth_mac(i + SH7757LCR_ETHERNET_NUM_CH, mac_string, buf);
+ sprintf(env_string, "eth%daddr", i + SH7757LCR_ETHERNET_NUM_CH);
+ setenv(env_string, mac_string);
+
+ set_mac_to_sh_giga_eth_register(i, mac_string);
+ }
+
+ free(buf);
+}
+
+static void init_pcie(void)
+{
+ struct pcie_setup_regs *pcie_setup = PCIE_SETUP_BASE;
+ struct pcie_system_bus_regs *pcie_sysbus = PCIE_SYSTEM_BUS_BASE;
+
+ writel(0x00000ff2, &pcie_setup->ladmsk0);
+ writel(0x00000001, &pcie_setup->barmap);
+ writel(0xffcaa000, &pcie_setup->lad0);
+ writel(0x00030000, &pcie_sysbus->endictl0);
+ writel(0x00000003, &pcie_sysbus->endictl1);
+ writel(0x00000004, &pcie_setup->pbictl2);
+}
+
+static void finish_spiboot(void)
+{
+ struct gctrl_regs *gctrl = GCTRL_BASE;
+ /*
+ * SH7757 B0 does not use LBSC.
+ * So if we set SPIBOOTCAN to 1, SH7757 can not access Area0.
+ * This setting is not cleared by manual reset, So we have to set it
+ * to 0.
+ */
+ writel(0x00000000, &gctrl->spibootcan);
+}
+
+int board_late_init(void)
+{
+ init_ethernet_mac();
+ init_pcie_bridge();
+ init_pcie();
+ finish_spiboot();
+
+ return 0;
+}
+
+int do_sh_g200(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
+{
+ struct gctrl_regs *gctrl = GCTRL_BASE;
+ unsigned long graofst;
+
+ writel(0xfedcba98, &gctrl->wprotect);
+ graofst = (SH7757LCR_SDRAM_PHYS_TOP + SH7757LCR_GRA_OFFSET) >> 24;
+ writel(graofst | 0xa0000f00, &gctrl->gracr3);
+
+ return 0;
+}
+
+U_BOOT_CMD(
+ sh_g200, 1, 1, do_sh_g200,
+ "enable sh-g200",
+ "enable SH-G200 bus (disable PCIe-G200)"
+);
+
+int do_write_mac(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
+{
+ int i, ret;
+ char mac_string[256];
+ struct spi_flash *spi;
+ unsigned char *buf;
+
+ if (argc != 5) {
+ buf = malloc(256);
+ if (!buf) {
+ printf("%s: malloc error.\n", __func__);
+ return 1;
+ }
+
+ get_sh_eth_mac_raw(buf, 256);
+
+ /* print current MAC address */
+ for (i = 0; i < 4; i++) {
+ get_sh_eth_mac(i, mac_string, buf);
+ if (i < 2)
+ printf(" ETHERC ch%d = %s\n", i, mac_string);
+ else
+ printf("GETHERC ch%d = %s\n", i-2, mac_string);
+ }
+ free(buf);
+ return 0;
+ }
+
+ /* new setting */
+ memset(mac_string, 0xff, sizeof(mac_string));
+ sprintf(mac_string, "%s\t%s\t%s\t%s",
+ argv[1], argv[2], argv[3], argv[4]);
+
+ /* write MAC data to SPI rom */
+ spi = spi_flash_probe(0, 0, 1000000, SPI_MODE_3);
+ if (!spi) {
+ printf("%s: spi_flash probe error.\n", __func__);
+ return 1;
+ }
+
+ ret = spi_flash_erase(spi, SH7757LCR_ETHERNET_MAC_BASE_SPI,
+ SH7757LCR_SPI_SECTOR_SIZE);
+ if (ret) {
+ printf("%s: spi_flash erase error.\n", __func__);
+ return 1;
+ }
+
+ ret = spi_flash_write(spi, SH7757LCR_ETHERNET_MAC_BASE_SPI,
+ sizeof(mac_string), mac_string);
+ if (ret) {
+ printf("%s: spi_flash write error.\n", __func__);
+ spi_flash_free(spi);
+ return 1;
+ }
+ spi_flash_free(spi);
+
+ puts("The writing of the MAC address to SPI ROM was completed.\n");
+
+ return 0;
+}
+
+U_BOOT_CMD(
+ write_mac, 5, 1, do_write_mac,
+ "write MAC address for ETHERC/GETHERC",
+ "[ETHERC ch0] [ETHERC ch1] [GETHERC ch0] [GETHERC ch1]\n"
+);
Code Review / kvmfornfv.git / blobdiff