Add qemu 2.4.0

[kvmfornfv.git] / qemu / roms / u-boot / board / renesas / sh7757lcr / README.sh7757lcr

diff --git a/qemu/roms/u-boot/board/renesas/sh7757lcr/README.sh7757lcr b/qemu/roms/u-boot/board/renesas/sh7757lcr/README.sh7757lcr
new file mode 100644 (file)
index 0000000..3e9c1c1
--- /dev/null
+++ b/qemu/roms/u-boot/board/renesas/sh7757lcr/README.sh7757lcr
@@ -0,0 +1,77 @@
+========================================
+Renesas R0P7757LC0030RL board
+========================================
+
+This board specification:
+=========================
+
+The R0P7757LC0030RL(board config name:sh7757lcr) has the following device:
+
+ - SH7757 (SH-4A)
+ - DDR3-SDRAM 256MB (with ECC)
+ - SPI ROM 8MB
+ - 2D Graphic controller
+ - Ethernet controller
+ - eMMC 2GB
+
+
+configuration for This board:
+=============================
+
+You can select the configuration as follows:
+
+ - make sh7785lcr_config
+
+
+This board specific command:
+============================
+
+This board has the following its specific command:
+
+ - sh_g200
+ - write_mac
+
+
+1. sh_g200
+
+If we run this command, SH4 can control the G200.
+The default setting is that SH4 cannot control the G200.
+
+
+2. write_mac
+
+You can write MAC address to SPI ROM.
+
+ Usage 1) Write MAC address
+
+   write_mac [ETHERC ch0] [ETHERC ch1] [GETHERC ch0] [GETHERC ch1]
+
+       For example)
+        => write_mac 00:00:87:6c:21:80 00:00:87:6c:21:81 00:00:87:6c:21:82 00:00:87:6c:21:83
+               *) We have to input the command as a single line
+                  (without carriage return)
+               *) We have to reset after input the command.
+
+ Usage 2) Show current data
+
+   write_mac
+
+       For example)
+               => write_mac
+                ETHERC ch0 = 00:00:87:6c:21:80
+                ETHERC ch1 = 00:00:87:6c:21:81
+               GETHERC ch0 = 00:00:87:6c:21:82
+               GETHERC ch1 = 00:00:87:6c:21:83
+
+
+Update SPI ROM:
+============================
+
+1. Copy u-boot image to RAM area.
+2. Probe SPI device.
+   => sf probe 0
+   8192 KiB M25P64 at 0:0 is now current device
+3. Erase SPI ROM.
+   => sf erase 0 80000
+4. Write u-boot image to SPI ROM.
+   => sf write 0x89000000 0 80000