--- /dev/null
+/*
+ * (C) Copyright 2001-2003
+ * Matthias Fuchs, esd gmbh germany, matthias.fuchs@esd-electronics.com
+ * Stefan Roese, esd gmbh germany, stefan.roese@esd-electronics.com
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+/* The DEBUG define must be before common to enable debugging */
+#undef DEBUG
+#include <common.h>
+#include <asm/processor.h>
+#include <command.h>
+#include "fpga.h"
+/* ------------------------------------------------------------------------- */
+
+#define MAX_ONES 226
+
+/* MPC850 port D */
+#define PD(bit) (1 << (15 - (bit)))
+# define FPGA_INIT PD(11) /* FPGA init pin (ppc input) */
+# define FPGA_PRG PD(12) /* FPGA program pin (ppc output) */
+# define FPGA_CLK PD(13) /* FPGA clk pin (ppc output) */
+# define FPGA_DATA PD(14) /* FPGA data pin (ppc output) */
+# define FPGA_DONE PD(15) /* FPGA done pin (ppc input) */
+
+
+/* DDR 0 - input, 1 - output */
+#define FPGA_INIT_PDDIR FPGA_PRG | FPGA_CLK | FPGA_DATA /* just set outputs */
+
+
+#define SET_FPGA(data) immr->im_ioport.iop_pddat = (data)
+#define GET_FPGA immr->im_ioport.iop_pddat
+
+#define FPGA_WRITE_1 { \
+ SET_FPGA(FPGA_PRG | FPGA_DATA); /* set clock to 0 */ \
+ SET_FPGA(FPGA_PRG | FPGA_DATA); /* set data to 1 */ \
+ SET_FPGA(FPGA_PRG | FPGA_CLK | FPGA_DATA); /* set clock to 1 */ \
+ SET_FPGA(FPGA_PRG | FPGA_CLK | FPGA_DATA);} /* set data to 1 */
+
+#define FPGA_WRITE_0 { \
+ SET_FPGA(FPGA_PRG | FPGA_DATA); /* set clock to 0 */ \
+ SET_FPGA(FPGA_PRG); /* set data to 0 */ \
+ SET_FPGA(FPGA_PRG | FPGA_CLK); /* set clock to 1 */ \
+ SET_FPGA(FPGA_PRG | FPGA_CLK | FPGA_DATA);} /* set data to 1 */
+
+
+int fpga_boot (unsigned char *fpgadata, int size)
+{
+ volatile immap_t *immr = (immap_t *) CONFIG_SYS_IMMR;
+ int i, index, len;
+ int count;
+
+#ifdef CONFIG_SYS_FPGA_SPARTAN2
+ int j;
+ unsigned char data;
+#else
+ unsigned char b;
+ int bit;
+#endif
+
+ debug ("fpga_boot: fpgadata = %p, size = %d\n", fpgadata, size);
+
+ /* display infos on fpgaimage */
+ printf ("FPGA:");
+ index = 15;
+ for (i = 0; i < 4; i++) {
+ len = fpgadata[index];
+ printf (" %s", &(fpgadata[index + 1]));
+ index += len + 3;
+ }
+ printf ("\n");
+
+
+ index = 0;
+
+#ifdef CONFIG_SYS_FPGA_SPARTAN2
+ /* search for preamble 0xFFFFFFFF */
+ while (1) {
+ if ((fpgadata[index] == 0xff) && (fpgadata[index + 1] == 0xff)
+ && (fpgadata[index + 2] == 0xff)
+ && (fpgadata[index + 3] == 0xff))
+ break; /* preamble found */
+ else
+ index++;
+ }
+#else
+ /* search for preamble 0xFF2X */
+ for (index = 0; index < size - 1; index++) {
+ if ((fpgadata[index] == 0xff)
+ && ((fpgadata[index + 1] & 0xf0) == 0x30))
+ break;
+ }
+ index += 2;
+#endif
+
+ debug ("FPGA: configdata starts at position 0x%x\n", index);
+ debug ("FPGA: length of fpga-data %d\n", size - index);
+
+ /*
+ * Setup port pins for fpga programming
+ */
+ immr->im_ioport.iop_pddir = FPGA_INIT_PDDIR;
+
+ debug ("%s, ", ((GET_FPGA & FPGA_DONE) == 0) ? "NOT DONE" : "DONE");
+ debug ("%s\n", ((GET_FPGA & FPGA_INIT) == 0) ? "NOT INIT" : "INIT");
+
+ /*
+ * Init fpga by asserting and deasserting PROGRAM*
+ */
+ SET_FPGA (FPGA_CLK | FPGA_DATA);
+
+ /* Wait for FPGA init line low */
+ count = 0;
+ while (GET_FPGA & FPGA_INIT) {
+ udelay (1000); /* wait 1ms */
+ /* Check for timeout - 100us max, so use 3ms */
+ if (count++ > 3) {
+ debug ("FPGA: Booting failed!\n");
+ return ERROR_FPGA_PRG_INIT_LOW;
+ }
+ }
+
+ debug ("%s, ", ((GET_FPGA & FPGA_DONE) == 0) ? "NOT DONE" : "DONE");
+ debug ("%s\n", ((GET_FPGA & FPGA_INIT) == 0) ? "NOT INIT" : "INIT");
+
+ /* deassert PROGRAM* */
+ SET_FPGA (FPGA_PRG | FPGA_CLK | FPGA_DATA);
+
+ /* Wait for FPGA end of init period . */
+ count = 0;
+ while (!(GET_FPGA & FPGA_INIT)) {
+ udelay (1000); /* wait 1ms */
+ /* Check for timeout */
+ if (count++ > 3) {
+ debug ("FPGA: Booting failed!\n");
+ return ERROR_FPGA_PRG_INIT_HIGH;
+ }
+ }
+
+ debug ("%s, ", ((GET_FPGA & FPGA_DONE) == 0) ? "NOT DONE" : "DONE");
+ debug ("%s\n", ((GET_FPGA & FPGA_INIT) == 0) ? "NOT INIT" : "INIT");
+
+ debug ("write configuration data into fpga\n");
+ /* write configuration-data into fpga... */
+
+#ifdef CONFIG_SYS_FPGA_SPARTAN2
+ /*
+ * Load uncompressed image into fpga
+ */
+ for (i = index; i < size; i++) {
+#ifdef CONFIG_SYS_FPGA_PROG_FEEDBACK
+ if ((i % 1024) == 0)
+ printf ("%6d out of %6d\r", i, size); /* let them know we are alive */
+#endif
+
+ data = fpgadata[i];
+ for (j = 0; j < 8; j++) {
+ if ((data & 0x80) == 0x80) {
+ FPGA_WRITE_1;
+ } else {
+ FPGA_WRITE_0;
+ }
+ data <<= 1;
+ }
+ }
+ /* add some 0xff to the end of the file */
+ for (i = 0; i < 8; i++) {
+ data = 0xff;
+ for (j = 0; j < 8; j++) {
+ if ((data & 0x80) == 0x80) {
+ FPGA_WRITE_1;
+ } else {
+ FPGA_WRITE_0;
+ }
+ data <<= 1;
+ }
+ }
+#else
+ /* send 0xff 0x20 */
+ FPGA_WRITE_1;
+ FPGA_WRITE_1;
+ FPGA_WRITE_1;
+ FPGA_WRITE_1;
+ FPGA_WRITE_1;
+ FPGA_WRITE_1;
+ FPGA_WRITE_1;
+ FPGA_WRITE_1;
+ FPGA_WRITE_0;
+ FPGA_WRITE_0;
+ FPGA_WRITE_1;
+ FPGA_WRITE_0;
+ FPGA_WRITE_0;
+ FPGA_WRITE_0;
+ FPGA_WRITE_0;
+ FPGA_WRITE_0;
+
+ /*
+ ** Bit_DeCompression
+ ** Code 1 .. maxOnes : n '1's followed by '0'
+ ** maxOnes + 1 .. maxOnes + 1 : n - 1 '1's no '0'
+ ** maxOnes + 2 .. 254 : n - (maxOnes + 2) '0's followed by '1'
+ ** 255 : '1'
+ */
+
+ for (i = index; i < size; i++) {
+ b = fpgadata[i];
+ if ((b >= 1) && (b <= MAX_ONES)) {
+ for (bit = 0; bit < b; bit++) {
+ FPGA_WRITE_1;
+ }
+ FPGA_WRITE_0;
+ } else if (b == (MAX_ONES + 1)) {
+ for (bit = 1; bit < b; bit++) {
+ FPGA_WRITE_1;
+ }
+ } else if ((b >= (MAX_ONES + 2)) && (b <= 254)) {
+ for (bit = 0; bit < (b - (MAX_ONES + 2)); bit++) {
+ FPGA_WRITE_0;
+ }
+ FPGA_WRITE_1;
+ } else if (b == 255) {
+ FPGA_WRITE_1;
+ }
+ }
+#endif
+ debug ("\n\n");
+ debug ("%s, ", ((GET_FPGA & FPGA_DONE) == 0) ? "NOT DONE" : "DONE");
+ debug ("%s\n", ((GET_FPGA & FPGA_INIT) == 0) ? "NOT INIT" : "INIT");
+
+ /*
+ * Check if fpga's DONE signal - correctly booted ?
+ */
+
+ /* Wait for FPGA end of programming period . */
+ count = 0;
+ while (!(GET_FPGA & FPGA_DONE)) {
+ udelay (1000); /* wait 1ms */
+ /* Check for timeout */
+ if (count++ > 3) {
+ debug ("FPGA: Booting failed!\n");
+ return ERROR_FPGA_PRG_DONE;
+ }
+ }
+
+ debug ("FPGA: Booting successful!\n");
+ return 0;
+}
Code Review / kvmfornfv.git / blobdiff