Add qemu 2.4.0

[kvmfornfv.git] / qemu / roms / u-boot / board / nvidia / seaboard / seaboard.c

diff --git a/qemu/roms/u-boot/board/nvidia/seaboard/seaboard.c b/qemu/roms/u-boot/board/nvidia/seaboard/seaboard.c
new file mode 100644 (file)
index 0000000..ce2db40
--- /dev/null
+++ b/qemu/roms/u-boot/board/nvidia/seaboard/seaboard.c
@@ -0,0 +1,50 @@
+/*
+ *  (C) Copyright 2010,2011
+ *  NVIDIA Corporation <www.nvidia.com>
+ *
+ * SPDX-License-Identifier:    GPL-2.0+
+ */
+
+#include <common.h>
+#include <asm/io.h>
+#include <asm/arch/tegra.h>
+#include <asm/arch/clock.h>
+#include <asm/arch/funcmux.h>
+#include <asm/arch/gpio.h>
+#include <asm/arch/pinmux.h>
+#include <asm/gpio.h>
+
+/* TODO: Remove this code when the SPI switch is working */
+#if (CONFIG_MACH_TYPE != MACH_TYPE_VENTANA)
+void gpio_early_init_uart(void)
+{
+       /* Enable UART via GPIO_PI3 (port 8, bit 3) so serial console works */
+#ifndef CONFIG_SPL_BUILD
+       gpio_request(GPIO_PI3, NULL);
+#endif
+       gpio_direction_output(GPIO_PI3, 0);
+}
+#endif
+
+#ifdef CONFIG_TEGRA_MMC
+/*
+ * Routine: pin_mux_mmc
+ * Description: setup the pin muxes/tristate values for the SDMMC(s)
+ */
+void pin_mux_mmc(void)
+{
+       funcmux_select(PERIPH_ID_SDMMC4, FUNCMUX_SDMMC4_ATB_GMA_GME_8_BIT);
+       funcmux_select(PERIPH_ID_SDMMC3, FUNCMUX_SDMMC3_SDB_4BIT);
+
+       /* For power GPIO PI6 */
+       pinmux_tristate_disable(PMUX_PINGRP_ATA);
+       /* For CD GPIO PI5 */
+       pinmux_tristate_disable(PMUX_PINGRP_ATC);
+}
+#endif
+
+void pin_mux_usb(void)
+{
+       /* For USB's GPIO PD0. For now, since we have no pinmux in fdt */
+       pinmux_tristate_disable(PMUX_PINGRP_SLXK);
+}