Add qemu 2.4.0
[kvmfornfv.git] / qemu / roms / u-boot / board / musenki / flash.c
diff --git a/qemu/roms/u-boot/board/musenki/flash.c b/qemu/roms/u-boot/board/musenki/flash.c
new file mode 100644 (file)
index 0000000..080ec7f
--- /dev/null
@@ -0,0 +1,496 @@
+/*
+ * (C) Copyright 2001
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
+ * SPDX-License-Identifier:    GPL-2.0+
+ */
+
+#include <common.h>
+#include <mpc824x.h>
+
+#if defined(CONFIG_ENV_IS_IN_FLASH)
+# ifndef  CONFIG_ENV_ADDR
+#  define CONFIG_ENV_ADDR      (CONFIG_SYS_FLASH_BASE + CONFIG_ENV_OFFSET)
+# endif
+# ifndef  CONFIG_ENV_SIZE
+#  define CONFIG_ENV_SIZE      CONFIG_ENV_SECT_SIZE
+# endif
+# ifndef  CONFIG_ENV_SECT_SIZE
+#  define CONFIG_ENV_SECT_SIZE  CONFIG_ENV_SIZE
+# endif
+#endif
+
+/*---------------------------------------------------------------------*/
+#undef DEBUG_FLASH
+
+#ifdef DEBUG_FLASH
+#define DEBUGF(fmt,args...) printf(fmt ,##args)
+#else
+#define DEBUGF(fmt,args...)
+#endif
+/*---------------------------------------------------------------------*/
+
+flash_info_t   flash_info[CONFIG_SYS_MAX_FLASH_BANKS]; /* info for FLASH chips */
+
+/*-----------------------------------------------------------------------
+ * Functions
+ */
+static ulong flash_get_size (vu_char *addr, flash_info_t *info);
+static int write_data (flash_info_t *info, uchar *dest, uchar data);
+static void flash_get_offsets (ulong base, flash_info_t *info);
+
+
+/*
+ * don't ask.  its stupid, but more than one soul has had to live with this mistake
+ * "swaptab[i]" is the value of "i" with the bits reversed.
+ */
+
+#define  MUSENKI_BROKEN_FLASH 1
+
+#ifdef MUSENKI_BROKEN_FLASH
+unsigned char swaptab[256] = {
+  0x00, 0x80, 0x40, 0xc0, 0x20, 0xa0, 0x60, 0xe0,
+  0x10, 0x90, 0x50, 0xd0, 0x30, 0xb0, 0x70, 0xf0,
+  0x08, 0x88, 0x48, 0xc8, 0x28, 0xa8, 0x68, 0xe8,
+  0x18, 0x98, 0x58, 0xd8, 0x38, 0xb8, 0x78, 0xf8,
+  0x04, 0x84, 0x44, 0xc4, 0x24, 0xa4, 0x64, 0xe4,
+  0x14, 0x94, 0x54, 0xd4, 0x34, 0xb4, 0x74, 0xf4,
+  0x0c, 0x8c, 0x4c, 0xcc, 0x2c, 0xac, 0x6c, 0xec,
+  0x1c, 0x9c, 0x5c, 0xdc, 0x3c, 0xbc, 0x7c, 0xfc,
+  0x02, 0x82, 0x42, 0xc2, 0x22, 0xa2, 0x62, 0xe2,
+  0x12, 0x92, 0x52, 0xd2, 0x32, 0xb2, 0x72, 0xf2,
+  0x0a, 0x8a, 0x4a, 0xca, 0x2a, 0xaa, 0x6a, 0xea,
+  0x1a, 0x9a, 0x5a, 0xda, 0x3a, 0xba, 0x7a, 0xfa,
+  0x06, 0x86, 0x46, 0xc6, 0x26, 0xa6, 0x66, 0xe6,
+  0x16, 0x96, 0x56, 0xd6, 0x36, 0xb6, 0x76, 0xf6,
+  0x0e, 0x8e, 0x4e, 0xce, 0x2e, 0xae, 0x6e, 0xee,
+  0x1e, 0x9e, 0x5e, 0xde, 0x3e, 0xbe, 0x7e, 0xfe,
+  0x01, 0x81, 0x41, 0xc1, 0x21, 0xa1, 0x61, 0xe1,
+  0x11, 0x91, 0x51, 0xd1, 0x31, 0xb1, 0x71, 0xf1,
+  0x09, 0x89, 0x49, 0xc9, 0x29, 0xa9, 0x69, 0xe9,
+  0x19, 0x99, 0x59, 0xd9, 0x39, 0xb9, 0x79, 0xf9,
+  0x05, 0x85, 0x45, 0xc5, 0x25, 0xa5, 0x65, 0xe5,
+  0x15, 0x95, 0x55, 0xd5, 0x35, 0xb5, 0x75, 0xf5,
+  0x0d, 0x8d, 0x4d, 0xcd, 0x2d, 0xad, 0x6d, 0xed,
+  0x1d, 0x9d, 0x5d, 0xdd, 0x3d, 0xbd, 0x7d, 0xfd,
+  0x03, 0x83, 0x43, 0xc3, 0x23, 0xa3, 0x63, 0xe3,
+  0x13, 0x93, 0x53, 0xd3, 0x33, 0xb3, 0x73, 0xf3,
+  0x0b, 0x8b, 0x4b, 0xcb, 0x2b, 0xab, 0x6b, 0xeb,
+  0x1b, 0x9b, 0x5b, 0xdb, 0x3b, 0xbb, 0x7b, 0xfb,
+  0x07, 0x87, 0x47, 0xc7, 0x27, 0xa7, 0x67, 0xe7,
+  0x17, 0x97, 0x57, 0xd7, 0x37, 0xb7, 0x77, 0xf7,
+  0x0f, 0x8f, 0x4f, 0xcf, 0x2f, 0xaf, 0x6f, 0xef,
+  0x1f, 0x9f, 0x5f, 0xdf, 0x3f, 0xbf, 0x7f, 0xff,
+};
+
+#define BS(b)     (swaptab[b])
+
+#else
+
+#define BS(b)     (b)
+
+#endif
+
+#define BYTEME(x) ((x) & 0xFF)
+
+/*-----------------------------------------------------------------------
+ */
+
+unsigned long flash_init (void)
+{
+       unsigned long size_b0, size_b1;
+       int i;
+
+       /* Init: no FLASHes known */
+       for (i=0; i<CONFIG_SYS_MAX_FLASH_BANKS; ++i) {
+               flash_info[i].flash_id = FLASH_UNKNOWN;
+       }
+
+       /* Static FLASH Bank configuration here - FIXME XXX */
+
+       DEBUGF("\n## Get flash bank 1 size @ 0x%08x\n",CONFIG_SYS_FLASH_BASE0_PRELIM);
+
+       size_b0 = flash_get_size((vu_char *)CONFIG_SYS_FLASH_BASE0_PRELIM, &flash_info[0]);
+
+       if (flash_info[0].flash_id == FLASH_UNKNOWN) {
+               printf ("## Unknown FLASH on Bank 0: "
+                       "ID 0x%lx, Size = 0x%08lx = %ld MB\n",
+                       flash_info[0].flash_id,
+                       size_b0, size_b0<<20);
+       }
+
+       DEBUGF("## Get flash bank 2 size @ 0x%08x\n",CONFIG_SYS_FLASH_BASE1_PRELIM);
+       size_b1 = flash_get_size((vu_char *)CONFIG_SYS_FLASH_BASE1_PRELIM, &flash_info[1]);
+
+       DEBUGF("## Prelim. Flash bank sizes: %08lx + 0x%08lx\n",size_b0,size_b1);
+
+       flash_get_offsets (CONFIG_SYS_FLASH_BASE, &flash_info[0]);
+
+       flash_info[0].size = size_b0;
+
+#if CONFIG_SYS_MONITOR_BASE >= CONFIG_SYS_FLASH_BASE
+       DEBUGF("protect monitor %x @ %x\n", CONFIG_SYS_MONITOR_BASE, monitor_flash_len);
+       /* monitor protection ON by default */
+       flash_protect(FLAG_PROTECT_SET,
+                     CONFIG_SYS_MONITOR_BASE,
+                     CONFIG_SYS_MONITOR_BASE+monitor_flash_len-1,
+                     &flash_info[0]);
+#endif
+
+#ifdef CONFIG_ENV_IS_IN_FLASH
+       /* ENV protection ON by default */
+       DEBUGF("protect environtment %x @ %x\n", CONFIG_ENV_ADDR, CONFIG_ENV_SECT_SIZE);
+       flash_protect(FLAG_PROTECT_SET,
+                     CONFIG_ENV_ADDR,
+                     CONFIG_ENV_ADDR+CONFIG_ENV_SECT_SIZE-1,
+                     &flash_info[0]);
+#endif
+
+       if (size_b1) {
+               flash_info[1].size = size_b1;
+               flash_get_offsets (CONFIG_SYS_FLASH_BASE + size_b0, &flash_info[1]);
+
+#if CONFIG_SYS_MONITOR_BASE >= CONFIG_SYS_FLASH_BASE
+               /* monitor protection ON by default */
+               flash_protect(FLAG_PROTECT_SET,
+                             CONFIG_SYS_MONITOR_BASE,
+                             CONFIG_SYS_MONITOR_BASE+monitor_flash_len-1,
+                             &flash_info[1]);
+#endif
+
+#ifdef CONFIG_ENV_IS_IN_FLASH
+               /* ENV protection ON by default */
+               flash_protect(FLAG_PROTECT_SET,
+                             CONFIG_ENV_ADDR,
+                             CONFIG_ENV_ADDR+CONFIG_ENV_SECT_SIZE-1,
+                             &flash_info[1]);
+#endif
+       } else {
+               flash_info[1].flash_id = FLASH_UNKNOWN;
+               flash_info[1].sector_count = -1;
+               flash_info[1].size = 0;
+       }
+
+       DEBUGF("## Final Flash bank sizes: %08lx + 0x%08lx\n",size_b0,size_b1);
+
+       return (size_b0 + size_b1);
+}
+
+/*-----------------------------------------------------------------------
+ */
+static void flash_get_offsets (ulong base, flash_info_t *info)
+{
+       int i;
+
+       if (info->flash_id == FLASH_UNKNOWN) {
+               return;
+       }
+
+       switch (info->flash_id & FLASH_VENDMASK) {
+       case FLASH_MAN_INTEL:
+           for (i = 0; i < info->sector_count; i++) {
+               info->start[i] = base;
+               base += 0x00020000;             /* 128k per bank */
+           }
+           return;
+
+       default:
+           printf ("Don't know sector ofsets for flash type 0x%lx\n", info->flash_id);
+           return;
+       }
+}
+
+/*-----------------------------------------------------------------------
+ */
+void flash_print_info  (flash_info_t *info)
+{
+       int i;
+
+       if (info->flash_id == FLASH_UNKNOWN) {
+               printf ("missing or unknown FLASH type\n");
+               return;
+       }
+
+       switch (info->flash_id & FLASH_VENDMASK) {
+       case FLASH_MAN_AMD:     printf ("AMD ");                break;
+       case FLASH_MAN_FUJ:     printf ("Fujitsu ");            break;
+       case FLASH_MAN_SST:     printf ("SST ");                break;
+       case FLASH_MAN_STM:     printf ("STM ");                break;
+       case FLASH_MAN_INTEL:   printf ("Intel ");              break;
+       case FLASH_MAN_MT:      printf ("MT ");                 break;
+       default:                printf ("Unknown Vendor ");     break;
+       }
+
+       switch (info->flash_id & FLASH_TYPEMASK) {
+       case FLASH_28F320J3A:   printf ("28F320J3A (32Mbit = 128K x 32)\n");
+                               break;
+       case FLASH_28F640J3A:   printf ("28F640J3A (64Mbit = 128K x 64)\n");
+                               break;
+       case FLASH_28F128J3A:   printf ("28F128J3A (128Mbit = 128K x 128)\n");
+                               break;
+       default:                printf ("Unknown Chip Type\n");
+                               break;
+       }
+
+       if (info->size >= (1 << 20)) {
+               i = 20;
+       } else {
+               i = 10;
+       }
+       printf ("  Size: %ld %cB in %d Sectors\n",
+               info->size >> i,
+               (i == 20) ? 'M' : 'k',
+               info->sector_count);
+
+       printf ("  Sector Start Addresses:");
+       for (i=0; i<info->sector_count; ++i) {
+               if ((i % 5) == 0)
+                       printf ("\n   ");
+               printf (" %08lX%s",
+                       info->start[i],
+                       info->protect[i] ? " (RO)" : "     "
+               );
+       }
+       printf ("\n");
+       return;
+}
+
+/*-----------------------------------------------------------------------
+ */
+
+
+/*-----------------------------------------------------------------------
+ */
+
+/*
+ * The following code cannot be run from FLASH!
+ */
+static ulong flash_get_size (vu_char *addr, flash_info_t *info)
+{
+       vu_char manuf, device;
+
+       addr[0] = BS(0x90);
+       manuf = BS(addr[0]);
+       DEBUGF("Manuf. ID @ 0x%08lx: 0x%08x\n", (vu_char *)addr, manuf);
+
+       switch (manuf) {
+       case BYTEME(AMD_MANUFACT):
+               info->flash_id = FLASH_MAN_AMD;
+               break;
+       case BYTEME(FUJ_MANUFACT):
+               info->flash_id = FLASH_MAN_FUJ;
+               break;
+       case BYTEME(SST_MANUFACT):
+               info->flash_id = FLASH_MAN_SST;
+               break;
+       case BYTEME(STM_MANUFACT):
+               info->flash_id = FLASH_MAN_STM;
+               break;
+       case BYTEME(INTEL_MANUFACT):
+               info->flash_id = FLASH_MAN_INTEL;
+               break;
+       default:
+               info->flash_id = FLASH_UNKNOWN;
+               info->sector_count = 0;
+               info->size = 0;
+               addr[0] = BS(0xFF);             /* restore read mode, (yes, BS is a NOP) */
+               return 0;                       /* no or unknown flash  */
+       }
+
+       device = BS(addr[2]);                   /* device ID            */
+
+       DEBUGF("Device ID @ 0x%08x: 0x%08x\n", (&addr[1]), device);
+
+       switch (device) {
+       case BYTEME(INTEL_ID_28F320J3A):
+               info->flash_id += FLASH_28F320J3A;
+               info->sector_count = 32;
+               info->size = 0x00400000;
+               break;                          /* =>  4 MB             */
+
+       case BYTEME(INTEL_ID_28F640J3A):
+               info->flash_id += FLASH_28F640J3A;
+               info->sector_count = 64;
+               info->size = 0x00800000;
+               break;                          /* => 8 MB              */
+
+       case BYTEME(INTEL_ID_28F128J3A):
+               info->flash_id += FLASH_28F128J3A;
+               info->sector_count = 128;
+               info->size = 0x01000000;
+               break;                          /* => 16 MB             */
+
+       default:
+               info->flash_id = FLASH_UNKNOWN;
+               addr[0] = BS(0xFF);             /* restore read mode (yes, a NOP) */
+               return 0;                       /* => no or unknown flash */
+
+       }
+
+       if (info->sector_count > CONFIG_SYS_MAX_FLASH_SECT) {
+               printf ("** ERROR: sector count %d > max (%d) **\n",
+                       info->sector_count, CONFIG_SYS_MAX_FLASH_SECT);
+               info->sector_count = CONFIG_SYS_MAX_FLASH_SECT;
+       }
+
+       addr[0] = BS(0xFF);             /* restore read mode */
+
+       return (info->size);
+}
+
+
+/*-----------------------------------------------------------------------
+ */
+
+int    flash_erase (flash_info_t *info, int s_first, int s_last)
+{
+       int flag, prot, sect;
+       ulong start, now, last;
+
+       if ((s_first < 0) || (s_first > s_last)) {
+               if (info->flash_id == FLASH_UNKNOWN) {
+                       printf ("- missing\n");
+               } else {
+                       printf ("- no sectors to erase\n");
+               }
+               return 1;
+       }
+
+       if ((info->flash_id & FLASH_VENDMASK) != FLASH_MAN_INTEL) {
+               printf ("Can erase only Intel flash types - aborted\n");
+               return 1;
+       }
+
+       prot = 0;
+       for (sect=s_first; sect<=s_last; ++sect) {
+               if (info->protect[sect]) {
+                       prot++;
+               }
+       }
+
+       if (prot) {
+               printf ("- Warning: %d protected sectors will not be erased!\n", prot);
+       } else {
+               printf ("\n");
+       }
+
+       start = get_timer (0);
+       last  = start;
+       /* Start erase on unprotected sectors */
+       for (sect = s_first; sect<=s_last; sect++) {
+               if (info->protect[sect] == 0) { /* not protected */
+                       vu_char *addr = (vu_char *)(info->start[sect]);
+                       unsigned long status;
+
+                       /* Disable interrupts which might cause a timeout here */
+                       flag = disable_interrupts();
+
+                       *addr = BS(0x50);       /* clear status register */
+                       *addr = BS(0x20);       /* erase setup */
+                       *addr = BS(0xD0);       /* erase confirm */
+
+                       /* re-enable interrupts if necessary */
+                       if (flag) {
+                               enable_interrupts();
+                       }
+
+                       /* wait at least 80us - let's wait 1 ms */
+                       udelay (1000);
+
+                       while (((status = BS(*addr)) & BYTEME(0x00800080)) != BYTEME(0x00800080)) {
+                               if ((now=get_timer(start)) > CONFIG_SYS_FLASH_ERASE_TOUT) {
+                                       printf ("Timeout\n");
+                                       *addr = BS(0xB0); /* suspend erase        */
+                                       *addr = BS(0xFF); /* reset to read mode */
+                                       return 1;
+                               }
+
+                               /* show that we're waiting */
+                               if ((now - last) > 1000) {      /* every second */
+                                       putc ('.');
+                                       last = now;
+                               }
+                       }
+
+                       *addr = BS(0xFF);       /* reset to read mode */
+               }
+       }
+       printf (" done\n");
+       return 0;
+}
+
+/*-----------------------------------------------------------------------
+ * Copy memory to flash, returns:
+ * 0 - OK
+ * 1 - write timeout
+ * 2 - Flash not erased
+ * 4 - Flash not identified
+ */
+
+#define        FLASH_WIDTH     1       /* flash bus width in bytes */
+
+int write_buff (flash_info_t *info, uchar *src, ulong addr, ulong cnt)
+{
+       uchar *wp = (uchar *)addr;
+       int rc;
+
+       if (info->flash_id == FLASH_UNKNOWN) {
+               return 4;
+       }
+
+       while (cnt > 0) {
+               if ((rc = write_data(info, wp, *src)) != 0) {
+                       return rc;
+               }
+               wp++;
+               src++;
+               cnt--;
+       }
+
+       return cnt;
+}
+
+/*-----------------------------------------------------------------------
+ * Write a word to Flash, returns:
+ * 0 - OK
+ * 1 - write timeout
+ * 2 - Flash not erased
+ */
+static int write_data (flash_info_t *info, uchar *dest, uchar data)
+{
+       vu_char *addr = (vu_char *)dest;
+       ulong status;
+       ulong start;
+       int flag;
+
+       /* Check if Flash is (sufficiently) erased */
+       if ((BS(*addr) & data) != data) {
+               return 2;
+       }
+       /* Disable interrupts which might cause a timeout here */
+       flag = disable_interrupts();
+
+       *addr = BS(0x40);               /* write setup */
+       *addr = data;
+
+       /* re-enable interrupts if necessary */
+       if (flag) {
+               enable_interrupts();
+       }
+
+       start = get_timer (0);
+
+       while (((status = BS(*addr)) & BYTEME(0x00800080)) != BYTEME(0x00800080)) {
+               if (get_timer(start) > CONFIG_SYS_FLASH_WRITE_TOUT) {
+                       *addr = BS(0xFF);       /* restore read mode */
+                       return 1;
+               }
+       }
+
+       *addr = BS(0xFF);       /* restore read mode */
+
+       return 0;
+}
+
+/*-----------------------------------------------------------------------
+ */