Add qemu 2.4.0

[kvmfornfv.git] / qemu / roms / u-boot / board / micronas / vct / vct.h

diff --git a/qemu/roms/u-boot/board/micronas/vct/vct.h b/qemu/roms/u-boot/board/micronas/vct/vct.h
new file mode 100644 (file)
index 0000000..0a1c5fc
--- /dev/null
+++ b/qemu/roms/u-boot/board/micronas/vct/vct.h
@@ -0,0 +1,91 @@
+/*
+ * (C) Copyright 2008 Stefan Roese <sr@denx.de>, DENX Software Engineering
+ *
+ * Copyright (C) 2006 Micronas GmbH
+ *
+ * SPDX-License-Identifier:    GPL-2.0+
+ */
+
+#include <asm/io.h>
+
+#include "bcu.h"
+#include "dcgu.h"
+#include "ebi.h"
+#include "scc.h"
+
+#ifdef CONFIG_VCT_PREMIUM
+/* Global start address of all memory mapped registers */
+#define REG_GLOBAL_START_ADDR  0xbf800000
+#define TOP_BASE               0x000c8000
+
+#include "vcth/reg_ebi.h"
+#include "vcth/reg_dcgu.h"
+#include "vcth/reg_wdt.h"
+#include "vcth/reg_gpio.h"
+#include "vcth/reg_fwsram.h"
+#include "vcth/reg_scc.h"
+#include "vcth/reg_usbh.h"
+#endif
+
+#ifdef CONFIG_VCT_PLATINUM
+/* Global start address of all memory mapped registers */
+#define REG_GLOBAL_START_ADDR  0xbf800000
+#define TOP_BASE               0x000c8000
+
+#include "vcth2/reg_ebi.h"
+#include "vcth/reg_dcgu.h"
+#include "vcth/reg_wdt.h"
+#include "vcth/reg_gpio.h"
+#include "vcth/reg_fwsram.h"
+#include "vcth/reg_scc.h"
+#include "vcth/reg_usbh.h"
+#endif
+
+#ifdef CONFIG_VCT_PLATINUMAVC
+/* Global start address of all memory mapped registers */
+#define REG_GLOBAL_START_ADDR  0xbdc00000
+#define TOP_BASE               0x00050000
+
+#include "vctv/reg_ebi.h"
+#include "vctv/reg_dcgu.h"
+#include "vctv/reg_wdt.h"
+#include "vctv/reg_gpio.h"
+#endif
+
+#ifndef _VCT_H
+#define _VCT_H
+
+/*
+ * Defines
+ */
+#define PRID_COMP_LEGACY       0x000000
+#define PRID_COMP_MIPS         0x010000
+#define PRID_IMP_LX4280                0xc200
+#define PRID_IMP_VGC           0x9000
+
+/*
+ * Prototypes
+ */
+int ebi_initialize(void);
+int ebi_init_nor_flash(void);
+int ebi_init_onenand(void);
+int ebi_init_smc911x(void);
+u32 smc911x_reg_read(u32 addr);
+void smc911x_reg_write(u32 addr, u32 data);
+int top_set_pin(int pin, int func);
+void vct_pin_mux_initialize(void);
+
+/*
+ * static inlines
+ */
+static inline void reg_write(u32 addr, u32 data)
+{
+       __raw_writel(data, addr + REG_GLOBAL_START_ADDR);
+}
+
+static inline u32 reg_read(u32 addr)
+{
+       return __raw_readl(addr + REG_GLOBAL_START_ADDR);
+}
+
+#endif /* _VCT_H */