Add qemu 2.4.0
[kvmfornfv.git] / qemu / roms / u-boot / board / ivm / flash.c
diff --git a/qemu/roms/u-boot/board/ivm/flash.c b/qemu/roms/u-boot/board/ivm/flash.c
new file mode 100644 (file)
index 0000000..14d3aee
--- /dev/null
@@ -0,0 +1,582 @@
+/*
+ * (C) Copyright 2000
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
+ * SPDX-License-Identifier:    GPL-2.0+
+ */
+
+#include <common.h>
+#include <mpc8xx.h>
+
+flash_info_t   flash_info[CONFIG_SYS_MAX_FLASH_BANKS]; /* info for FLASH chips */
+
+#if defined(CONFIG_ENV_IS_IN_FLASH)
+# ifndef  CONFIG_ENV_ADDR
+#  define CONFIG_ENV_ADDR      (CONFIG_SYS_FLASH_BASE + CONFIG_ENV_OFFSET)
+# endif
+# ifndef  CONFIG_ENV_SIZE
+#  define CONFIG_ENV_SIZE      CONFIG_ENV_SECT_SIZE
+# endif
+# ifndef  CONFIG_ENV_SECT_SIZE
+#  define CONFIG_ENV_SECT_SIZE  CONFIG_ENV_SIZE
+# endif
+#endif
+
+/*-----------------------------------------------------------------------
+ * Functions
+ */
+static ulong flash_get_size (vu_long *addr, flash_info_t *info);
+static int write_data (flash_info_t *info, ulong dest, ulong data);
+static void flash_get_offsets (ulong base, flash_info_t *info);
+
+/*-----------------------------------------------------------------------
+ */
+
+unsigned long flash_init (void)
+{
+       volatile immap_t     *immap  = (immap_t *)CONFIG_SYS_IMMR;
+       volatile memctl8xx_t *memctl = &immap->im_memctl;
+       unsigned long size_b0;
+       int i;
+
+       /* Init: no FLASHes known */
+       for (i=0; i<CONFIG_SYS_MAX_FLASH_BANKS; ++i) {
+               flash_info[i].flash_id = FLASH_UNKNOWN;
+       }
+
+       /* Static FLASH Bank configuration here - FIXME XXX */
+
+       size_b0 = flash_get_size((vu_long *)FLASH_BASE0_PRELIM, &flash_info[0]);
+
+       if (flash_info[0].flash_id == FLASH_UNKNOWN) {
+               printf ("## Unknown FLASH on Bank 0: "
+                       "ID 0x%lx, Size = 0x%08lx = %ld MB\n",
+                       flash_info[0].flash_id,
+                       size_b0, size_b0<<20);
+       }
+
+       /* Remap FLASH according to real size */
+       memctl->memc_or0 = CONFIG_SYS_OR_TIMING_FLASH | (-size_b0 & 0xFFFF8000);
+       memctl->memc_br0 = (CONFIG_SYS_FLASH_BASE & BR_BA_MSK) | \
+                               BR_MS_GPCM | BR_PS_16 | BR_V;
+
+       /* Re-do sizing to get full correct info */
+       size_b0 = flash_get_size((vu_long *)CONFIG_SYS_FLASH_BASE, &flash_info[0]);
+
+       flash_get_offsets (CONFIG_SYS_FLASH_BASE, &flash_info[0]);
+
+       flash_info[0].size = size_b0;
+
+#if CONFIG_SYS_MONITOR_BASE >= CONFIG_SYS_FLASH_BASE
+       /* monitor protection ON by default */
+       flash_protect(FLAG_PROTECT_SET,
+                     CONFIG_SYS_MONITOR_BASE,
+                     CONFIG_SYS_MONITOR_BASE+monitor_flash_len-1,
+                     &flash_info[0]);
+#endif
+
+#ifdef CONFIG_ENV_IS_IN_FLASH
+       /* ENV protection ON by default */
+       flash_protect(FLAG_PROTECT_SET,
+                     CONFIG_ENV_ADDR,
+                     CONFIG_ENV_ADDR+CONFIG_ENV_SECT_SIZE-1,
+                     &flash_info[0]);
+#endif
+
+       return (size_b0);
+}
+
+/*-----------------------------------------------------------------------
+ */
+static void flash_get_offsets (ulong base, flash_info_t *info)
+{
+       int i;
+
+       if (info->flash_id == FLASH_UNKNOWN) {
+               return;
+       }
+
+       switch (info->flash_id & FLASH_VENDMASK) {
+       case FLASH_MAN_MT:
+           if (info->flash_id & FLASH_BTYPE) {
+               /* set sector offsets for bottom boot block type        */
+               info->start[0] = base + 0x00000000;
+               info->start[1] = base + 0x00004000;
+               info->start[2] = base + 0x00006000;
+               info->start[3] = base + 0x00008000;
+               for (i = 4; i < info->sector_count; i++) {
+                       info->start[i] = base + ((i-3) * 0x00020000);
+               }
+           } else {
+               /* set sector offsets for top boot block type           */
+               i = info->sector_count - 1;
+               info->start[i--] = base + info->size - 0x00004000;
+               info->start[i--] = base + info->size - 0x00006000;
+               info->start[i--] = base + info->size - 0x00008000;
+               for (; i >= 0; i--) {
+                       info->start[i] = base + i * 0x00020000;
+               }
+           }
+           return;
+
+       case FLASH_MAN_SST:
+           for (i = 0; i < info->sector_count; i++) {
+               info->start[i] = base + (i * 0x00002000);
+           }
+           return;
+
+       case FLASH_MAN_AMD:
+       case FLASH_MAN_FUJ:
+
+           /* set up sector start address table */
+           if (info->flash_id & FLASH_BTYPE) {
+               /* set sector offsets for bottom boot block type        */
+               info->start[0] = base + 0x00000000;
+               info->start[1] = base + 0x00008000;
+               info->start[2] = base + 0x0000C000;
+               info->start[3] = base + 0x00010000;
+               for (i = 4; i < info->sector_count; i++) {
+                       info->start[i] = base + (i * 0x00020000) - 0x00060000;
+               }
+           } else {
+               /* set sector offsets for top boot block type           */
+               i = info->sector_count - 1;
+               info->start[i--] = base + info->size - 0x00008000;
+               info->start[i--] = base + info->size - 0x0000C000;
+               info->start[i--] = base + info->size - 0x00010000;
+               for (; i >= 0; i--) {
+                       info->start[i] = base + i * 0x00020000;
+               }
+           }
+           return;
+       default:
+           printf ("Don't know sector ofsets for flash type 0x%lx\n",
+               info->flash_id);
+           return;
+       }
+}
+
+/*-----------------------------------------------------------------------
+ */
+void flash_print_info  (flash_info_t *info)
+{
+       int i;
+
+       if (info->flash_id == FLASH_UNKNOWN) {
+               printf ("missing or unknown FLASH type\n");
+               return;
+       }
+
+       switch (info->flash_id & FLASH_VENDMASK) {
+       case FLASH_MAN_AMD:     printf ("AMD ");                break;
+       case FLASH_MAN_FUJ:     printf ("Fujitsu ");            break;
+       case FLASH_MAN_SST:     printf ("SST ");                break;
+       case FLASH_MAN_STM:     printf ("STM ");                break;
+       case FLASH_MAN_MT:      printf ("MT ");                 break;
+       case FLASH_MAN_INTEL:   printf ("Intel ");              break;
+       default:                printf ("Unknown Vendor ");     break;
+       }
+
+       switch (info->flash_id & FLASH_TYPEMASK) {
+       case FLASH_AM400B:      printf ("AM29LV400B (4 Mbit, bottom boot sect)\n");
+                               break;
+       case FLASH_AM400T:      printf ("AM29LV400T (4 Mbit, top boot sector)\n");
+                               break;
+       case FLASH_AM800B:      printf ("AM29LV800B (8 Mbit, bottom boot sect)\n");
+                               break;
+       case FLASH_AM800T:      printf ("AM29LV800T (8 Mbit, top boot sector)\n");
+                               break;
+       case FLASH_AM160B:      printf ("AM29LV160B (16 Mbit, bottom boot sect)\n");
+                               break;
+       case FLASH_AM160T:      printf ("AM29LV160T (16 Mbit, top boot sector)\n");
+                               break;
+       case FLASH_AM320B:      printf ("AM29LV320B (32 Mbit, bottom boot sect)\n");
+                               break;
+       case FLASH_AM320T:      printf ("AM29LV320T (32 Mbit, top boot sector)\n");
+                               break;
+       case FLASH_SST200A:     printf ("39xF200A (2M = 128K x 16)\n");
+                               break;
+       case FLASH_SST400A:     printf ("39xF400A (4M = 256K x 16)\n");
+                               break;
+       case FLASH_SST800A:     printf ("39xF800A (8M = 512K x 16)\n");
+                               break;
+       case FLASH_STM800AB:    printf ("M29W800AB (8M = 512K x 16)\n");
+                               break;
+       case FLASH_28F008S5:    printf ("28F008S5 (1M = 64K x 16)\n");
+                               break;
+       case FLASH_28F400_T:    printf ("28F400B3 (4Mbit, top boot sector)\n");
+                               break;
+       case FLASH_28F400_B:    printf ("28F400B3 (4Mbit, bottom boot sector)\n");
+                               break;
+       default:                printf ("Unknown Chip Type\n");
+                               break;
+       }
+
+       if (info->size >= (1 << 20)) {
+               i = 20;
+       } else {
+               i = 10;
+       }
+       printf ("  Size: %ld %cB in %d Sectors\n",
+               info->size >> i,
+               (i == 20) ? 'M' : 'k',
+               info->sector_count);
+
+       printf ("  Sector Start Addresses:");
+       for (i=0; i<info->sector_count; ++i) {
+               if ((i % 5) == 0)
+                       printf ("\n   ");
+               printf (" %08lX%s",
+                       info->start[i],
+                       info->protect[i] ? " (RO)" : "     "
+               );
+       }
+       printf ("\n");
+       return;
+}
+
+/*-----------------------------------------------------------------------
+ */
+
+
+/*-----------------------------------------------------------------------
+ */
+
+/*
+ * The following code cannot be run from FLASH!
+ */
+
+static ulong flash_get_size (vu_long *addr, flash_info_t *info)
+{
+       ushort value;
+       vu_short *saddr = (vu_short *)addr;
+
+       /* Read Manufacturer ID */
+       saddr[0] = 0x0090;
+       value = saddr[0];
+
+       switch (value) {
+       case (AMD_MANUFACT & 0xFFFF):
+               info->flash_id = FLASH_MAN_AMD;
+               break;
+       case (FUJ_MANUFACT & 0xFFFF):
+               info->flash_id = FLASH_MAN_FUJ;
+               break;
+       case (SST_MANUFACT & 0xFFFF):
+               info->flash_id = FLASH_MAN_SST;
+               break;
+       case (STM_MANUFACT & 0xFFFF):
+               info->flash_id = FLASH_MAN_STM;
+               break;
+       case (MT_MANUFACT & 0xFFFF):
+               info->flash_id = FLASH_MAN_MT;
+               break;
+       default:
+               info->flash_id = FLASH_UNKNOWN;
+               info->sector_count = 0;
+               info->size = 0;
+               saddr[0] = 0x00FF;              /* restore read mode */
+               return (0);                     /* no or unknown flash  */
+       }
+
+       value = saddr[1];                       /* device ID            */
+
+       switch (value) {
+       case (AMD_ID_LV400T & 0xFFFF):
+               info->flash_id += FLASH_AM400T;
+               info->sector_count = 11;
+               info->size = 0x00100000;
+               break;                          /* => 1 MB              */
+
+       case (AMD_ID_LV400B & 0xFFFF):
+               info->flash_id += FLASH_AM400B;
+               info->sector_count = 11;
+               info->size = 0x00100000;
+               break;                          /* => 1 MB              */
+
+       case (AMD_ID_LV800T & 0xFFFF):
+               info->flash_id += FLASH_AM800T;
+               info->sector_count = 19;
+               info->size = 0x00200000;
+               break;                          /* => 2 MB              */
+
+       case (AMD_ID_LV800B & 0xFFFF):
+               info->flash_id += FLASH_AM800B;
+               info->sector_count = 19;
+               info->size = 0x00200000;
+               break;                          /* => 2 MB              */
+
+       case (AMD_ID_LV160T & 0xFFFF):
+               info->flash_id += FLASH_AM160T;
+               info->sector_count = 35;
+               info->size = 0x00400000;
+               break;                          /* => 4 MB              */
+
+       case (AMD_ID_LV160B & 0xFFFF):
+               info->flash_id += FLASH_AM160B;
+               info->sector_count = 35;
+               info->size = 0x00400000;
+               break;                          /* => 4 MB              */
+#if 0  /* enable when device IDs are available */
+       case (AMD_ID_LV320T & 0xFFFF):
+               info->flash_id += FLASH_AM320T;
+               info->sector_count = 67;
+               info->size = 0x00800000;
+               break;                          /* => 8 MB              */
+
+       case (AMD_ID_LV320B & 0xFFFF):
+               info->flash_id += FLASH_AM320B;
+               info->sector_count = 67;
+               info->size = 0x00800000;
+               break;                          /* => 8 MB              */
+#endif
+       case (SST_ID_xF200A & 0xFFFF):
+               info->flash_id += FLASH_SST200A;
+               info->sector_count = 64;        /* 39xF200A ID ( 2M = 128K x 16 ) */
+               info->size = 0x00080000;
+               break;
+       case (SST_ID_xF400A & 0xFFFF):
+               info->flash_id += FLASH_SST400A;
+               info->sector_count = 128;       /* 39xF400A ID ( 4M = 256K x 16 ) */
+               info->size = 0x00100000;
+               break;
+       case (SST_ID_xF800A & 0xFFFF):
+               info->flash_id += FLASH_SST800A;
+               info->sector_count = 256;       /* 39xF800A ID ( 8M = 512K x 16 ) */
+               info->size = 0x00200000;
+               break;                          /* => 2 MB              */
+       case (STM_ID_x800AB & 0xFFFF):
+               info->flash_id += FLASH_STM800AB;
+               info->sector_count = 19;
+               info->size = 0x00200000;
+               break;                          /* => 2 MB              */
+       case (MT_ID_28F400_T & 0xFFFF):
+               info->flash_id += FLASH_28F400_T;
+               info->sector_count = 7;
+               info->size = 0x00080000;
+               break;                          /* => 512 kB            */
+       case (MT_ID_28F400_B & 0xFFFF):
+               info->flash_id += FLASH_28F400_B;
+               info->sector_count = 7;
+               info->size = 0x00080000;
+               break;                          /* => 512 kB            */
+       default:
+               info->flash_id = FLASH_UNKNOWN;
+               saddr[0] = 0x00FF;              /* restore read mode */
+               return (0);                     /* => no or unknown flash */
+
+       }
+
+       if (info->sector_count > CONFIG_SYS_MAX_FLASH_SECT) {
+               printf ("** ERROR: sector count %d > max (%d) **\n",
+                       info->sector_count, CONFIG_SYS_MAX_FLASH_SECT);
+               info->sector_count = CONFIG_SYS_MAX_FLASH_SECT;
+       }
+
+       saddr[0] = 0x00FF;              /* restore read mode */
+
+       return (info->size);
+}
+
+
+/*-----------------------------------------------------------------------
+ */
+
+int    flash_erase (flash_info_t *info, int s_first, int s_last)
+{
+       int flag, prot, sect;
+       ulong start, now, last;
+
+       if ((s_first < 0) || (s_first > s_last)) {
+               if (info->flash_id == FLASH_UNKNOWN) {
+                       printf ("- missing\n");
+               } else {
+                       printf ("- no sectors to erase\n");
+               }
+               return 1;
+       }
+
+       if ((info->flash_id & FLASH_VENDMASK) != FLASH_MAN_MT) {
+               printf ("Can erase only MT flash types - aborted\n");
+               return 1;
+       }
+
+       prot = 0;
+       for (sect=s_first; sect<=s_last; ++sect) {
+               if (info->protect[sect]) {
+                       prot++;
+               }
+       }
+
+       if (prot) {
+               printf ("- Warning: %d protected sectors will not be erased!\n",
+                       prot);
+       } else {
+               printf ("\n");
+       }
+
+       start = get_timer (0);
+       last  = start;
+       /* Start erase on unprotected sectors */
+       for (sect = s_first; sect<=s_last; sect++) {
+               if (info->protect[sect] == 0) { /* not protected */
+                       vu_short *addr = (vu_short *)(info->start[sect]);
+                       unsigned short status;
+
+                       /* Disable interrupts which might cause a timeout here */
+                       flag = disable_interrupts();
+
+                       *addr = 0x0050; /* clear status register */
+                       *addr = 0x0020; /* erase setup */
+                       *addr = 0x00D0; /* erase confirm */
+
+                       /* re-enable interrupts if necessary */
+                       if (flag)
+                               enable_interrupts();
+
+                       /* wait at least 80us - let's wait 1 ms */
+                       udelay (1000);
+
+                       while (((status = *addr) & 0x0080) != 0x0080) {
+                               if ((now=get_timer(start)) > CONFIG_SYS_FLASH_ERASE_TOUT) {
+                                       printf ("Timeout\n");
+                                       *addr = 0x00FF; /* reset to read mode */
+                                       return 1;
+                               }
+
+                               /* show that we're waiting */
+                               if ((now - last) > 1000) {      /* every second */
+                                       putc ('.');
+                                       last = now;
+                               }
+                       }
+
+                       *addr = 0x00FF; /* reset to read mode */
+               }
+       }
+       printf (" done\n");
+       return 0;
+}
+
+/*-----------------------------------------------------------------------
+ * Copy memory to flash, returns:
+ * 0 - OK
+ * 1 - write timeout
+ * 2 - Flash not erased
+ * 4 - Flash not identified
+ */
+
+#define        FLASH_WIDTH     2       /* flash bus width in bytes */
+
+int write_buff (flash_info_t *info, uchar *src, ulong addr, ulong cnt)
+{
+       ulong cp, wp, data;
+       int i, l, rc;
+
+       if (info->flash_id == FLASH_UNKNOWN) {
+               return 4;
+       }
+
+       wp = (addr & ~(FLASH_WIDTH-1)); /* get lower FLASH_WIDTH aligned address */
+
+       /*
+        * handle unaligned start bytes
+        */
+       if ((l = addr - wp) != 0) {
+               data = 0;
+               for (i=0, cp=wp; i<l; ++i, ++cp) {
+                       data = (data << 8) | (*(uchar *)cp);
+               }
+               for (; i<FLASH_WIDTH && cnt>0; ++i) {
+                       data = (data << 8) | *src++;
+                       --cnt;
+                       ++cp;
+               }
+               for (; cnt==0 && i<FLASH_WIDTH; ++i, ++cp) {
+                       data = (data << 8) | (*(uchar *)cp);
+               }
+
+               if ((rc = write_data(info, wp, data)) != 0) {
+                       return (rc);
+               }
+               wp += FLASH_WIDTH;
+       }
+
+       /*
+        * handle FLASH_WIDTH aligned part
+        */
+       while (cnt >= FLASH_WIDTH) {
+               data = 0;
+               for (i=0; i<FLASH_WIDTH; ++i) {
+                       data = (data << 8) | *src++;
+               }
+               if ((rc = write_data(info, wp, data)) != 0) {
+                       return (rc);
+               }
+               wp  += FLASH_WIDTH;
+               cnt -= FLASH_WIDTH;
+       }
+
+       if (cnt == 0) {
+               return (0);
+       }
+
+       /*
+        * handle unaligned tail bytes
+        */
+       data = 0;
+       for (i=0, cp=wp; i<FLASH_WIDTH && cnt>0; ++i, ++cp) {
+               data = (data << 8) | *src++;
+               --cnt;
+       }
+       for (; i<FLASH_WIDTH; ++i, ++cp) {
+               data = (data << 8) | (*(uchar *)cp);
+       }
+
+       return (write_data(info, wp, data));
+}
+
+/*-----------------------------------------------------------------------
+ * Write a word to Flash, returns:
+ * 0 - OK
+ * 1 - write timeout
+ * 2 - Flash not erased
+ */
+static int write_data (flash_info_t *info, ulong dest, ulong data)
+{
+       vu_short *addr = (vu_short *)dest;
+       ushort sdata = (ushort)data;
+       ushort status;
+       ulong start;
+       int flag;
+
+       /* Check if Flash is (sufficiently) erased */
+       if ((*addr & sdata) != sdata) {
+               return (2);
+       }
+       /* Disable interrupts which might cause a timeout here */
+       flag = disable_interrupts();
+
+       *addr = 0x0040;         /* write setup */
+       *addr = sdata;
+
+       /* re-enable interrupts if necessary */
+       if (flag)
+               enable_interrupts();
+
+       start = get_timer (0);
+
+       while (((status = *addr) & 0x0080) != 0x0080) {
+               if (get_timer(start) > CONFIG_SYS_FLASH_WRITE_TOUT) {
+                       *addr = 0x00FF; /* restore read mode */
+                       return (1);
+               }
+       }
+
+       *addr = 0x00FF;         /* restore read mode */
+
+       return (0);
+}
+
+/*-----------------------------------------------------------------------
+ */