Add qemu 2.4.0

[kvmfornfv.git] / qemu / roms / u-boot / board / freescale / t4rdb / t4240rdb.c

diff --git a/qemu/roms/u-boot/board/freescale/t4rdb/t4240rdb.c b/qemu/roms/u-boot/board/freescale/t4rdb/t4240rdb.c
new file mode 100644 (file)
index 0000000..5448c86
--- /dev/null
+++ b/qemu/roms/u-boot/board/freescale/t4rdb/t4240rdb.c
@@ -0,0 +1,125 @@
+/*
+ * Copyright 2014 Freescale Semiconductor, Inc.
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#include <common.h>
+#include <command.h>
+#include <i2c.h>
+#include <netdev.h>
+#include <linux/compiler.h>
+#include <asm/mmu.h>
+#include <asm/processor.h>
+#include <asm/cache.h>
+#include <asm/immap_85xx.h>
+#include <asm/fsl_law.h>
+#include <asm/fsl_serdes.h>
+#include <asm/fsl_portals.h>
+#include <asm/fsl_liodn.h>
+#include <fm_eth.h>
+
+#include "t4rdb.h"
+
+DECLARE_GLOBAL_DATA_PTR;
+
+int checkboard(void)
+{
+       struct cpu_type *cpu = gd->arch.cpu;
+
+       printf("Board: %sRDB, ", cpu->name);
+
+       puts("SERDES Reference Clocks:\n");
+       printf("       SERDES1=100MHz SERDES2=156.25MHz\n"
+              "       SERDES3=100MHz SERDES4=100MHz\n");
+
+       return 0;
+}
+
+int board_early_init_r(void)
+{
+       const unsigned int flashbase = CONFIG_SYS_FLASH_BASE;
+       const u8 flash_esel = find_tlb_idx((void *)flashbase, 1);
+
+       /*
+        * Remap Boot flash + PROMJET region to caching-inhibited
+        * so that flash can be erased properly.
+        */
+
+       /* Flush d-cache and invalidate i-cache of any FLASH data */
+       flush_dcache();
+       invalidate_icache();
+
+       /* invalidate existing TLB entry for flash + promjet */
+       disable_tlb(flash_esel);
+
+       set_tlb(1, flashbase, CONFIG_SYS_FLASH_BASE_PHYS,
+               MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
+               0, flash_esel, BOOKE_PAGESZ_256M, 1);
+
+       set_liodns();
+#ifdef CONFIG_SYS_DPAA_QBMAN
+       setup_portals();
+#endif
+
+       return 0;
+}
+
+int misc_init_r(void)
+{
+       return 0;
+}
+
+void ft_board_setup(void *blob, bd_t *bd)
+{
+       phys_addr_t base;
+       phys_size_t size;
+
+       ft_cpu_setup(blob, bd);
+
+       base = getenv_bootm_low();
+       size = getenv_bootm_size();
+
+       fdt_fixup_memory(blob, (u64)base, (u64)size);
+
+#ifdef CONFIG_PCI
+       pci_of_setup(blob, bd);
+#endif
+
+       fdt_fixup_liodn(blob);
+       fdt_fixup_dr_usb(blob, bd);
+
+#ifdef CONFIG_SYS_DPAA_FMAN
+       fdt_fixup_fman_ethernet(blob);
+       fdt_fixup_board_enet(blob);
+#endif
+}
+
+/*
+ * This function is called by bdinfo to print detail board information.
+ * As an exmaple for future board, we organize the messages into
+ * several sections. If applicable, the message is in the format of
+ * <name>      = <value>
+ * It should aligned with normal output of bdinfo command.
+ *
+ * Voltage: Core, DDR and another configurable voltages
+ * Clock  : Critical clocks which are not printed already
+ * RCW    : RCW source if not printed already
+ * Misc   : Other important information not in above catagories
+ */
+void board_detail(void)
+{
+       int rcwsrc;
+
+       /* RCW section SW3[4] */
+       rcwsrc = 0x0;
+       puts("RCW source  = ");
+       switch (rcwsrc & 0x1) {
+       case 0x1:
+               puts("SDHC/eMMC\n");
+               break;
+       default:
+               puts("I2C normal addressing\n");
+               break;
+       }
+}