Add qemu 2.4.0

[kvmfornfv.git] / qemu / roms / u-boot / board / freescale / p1_p2_rdb_pc / tlb.c

diff --git a/qemu/roms/u-boot/board/freescale/p1_p2_rdb_pc/tlb.c b/qemu/roms/u-boot/board/freescale/p1_p2_rdb_pc/tlb.c
new file mode 100644 (file)
index 0000000..1c0008b
--- /dev/null
+++ b/qemu/roms/u-boot/board/freescale/p1_p2_rdb_pc/tlb.c
@@ -0,0 +1,111 @@
+/*
+ * Copyright 2010-2011 Freescale Semiconductor, Inc.
+ *
+ * SPDX-License-Identifier:    GPL-2.0+
+ */
+
+#include <common.h>
+#include <asm/mmu.h>
+
+struct fsl_e_tlb_entry tlb_table[] = {
+       /* TLB 0 - for temp stack in cache */
+       SET_TLB_ENTRY(0, CONFIG_SYS_INIT_RAM_ADDR,
+                       CONFIG_SYS_INIT_RAM_ADDR_PHYS,
+                       MAS3_SX|MAS3_SW|MAS3_SR, 0,
+                       0, 0, BOOKE_PAGESZ_4K, 0),
+       SET_TLB_ENTRY(0, CONFIG_SYS_INIT_RAM_ADDR + 4 * 1024 ,
+                       CONFIG_SYS_INIT_RAM_ADDR_PHYS + 4 * 1024,
+                       MAS3_SX|MAS3_SW|MAS3_SR, 0,
+                       0, 0, BOOKE_PAGESZ_4K, 0),
+       SET_TLB_ENTRY(0, CONFIG_SYS_INIT_RAM_ADDR + 8 * 1024 ,
+                       CONFIG_SYS_INIT_RAM_ADDR_PHYS + 8 * 1024,
+                       MAS3_SX|MAS3_SW|MAS3_SR, 0,
+                       0, 0, BOOKE_PAGESZ_4K, 0),
+       SET_TLB_ENTRY(0, CONFIG_SYS_INIT_RAM_ADDR + 12 * 1024 ,
+                       CONFIG_SYS_INIT_RAM_ADDR_PHYS + 12 * 1024,
+                       MAS3_SX|MAS3_SW|MAS3_SR, 0,
+                       0, 0, BOOKE_PAGESZ_4K, 0),
+
+       /* TLB 1 */
+       /* *I*** - Covers boot page */
+       SET_TLB_ENTRY(1, 0xfffff000, 0xfffff000,
+                       MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I,
+                       0, 0, BOOKE_PAGESZ_4K, 1),
+
+       /* *I*G* - CCSRBAR */
+       SET_TLB_ENTRY(1, CONFIG_SYS_CCSRBAR, CONFIG_SYS_CCSRBAR_PHYS,
+                       MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
+                       0, 1, BOOKE_PAGESZ_1M, 1),
+
+#ifndef CONFIG_SPL_BUILD
+       /* W**G* - Flash/promjet, localbus */
+       /* This will be changed to *I*G* after relocation to RAM. */
+       SET_TLB_ENTRY(1, CONFIG_SYS_FLASH_BASE, CONFIG_SYS_FLASH_BASE_PHYS,
+                       MAS3_SX|MAS3_SR, MAS2_W|MAS2_G,
+                       0, 2, BOOKE_PAGESZ_64M, 1),
+
+#ifdef CONFIG_PCI
+       /* *I*G* - PCI memory 1.5G */
+       SET_TLB_ENTRY(1, CONFIG_SYS_PCIE1_MEM_VIRT, CONFIG_SYS_PCIE1_MEM_PHYS,
+                       MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
+                       0, 3, BOOKE_PAGESZ_1G, 1),
+
+       /* *I*G* - PCI I/O effective: 192K  */
+       SET_TLB_ENTRY(1, CONFIG_SYS_PCIE1_IO_VIRT, CONFIG_SYS_PCIE1_IO_PHYS,
+                       MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
+                       0, 4, BOOKE_PAGESZ_256K, 1),
+#endif
+
+#ifdef CONFIG_VSC7385_ENET
+       /* *I*G - VSC7385 Switch */
+       SET_TLB_ENTRY(1, CONFIG_SYS_VSC7385_BASE, CONFIG_SYS_VSC7385_BASE_PHYS,
+                       MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
+                       0, 5, BOOKE_PAGESZ_1M, 1),
+#endif
+
+       SET_TLB_ENTRY(1, CONFIG_SYS_CPLD_BASE, CONFIG_SYS_CPLD_BASE_PHYS,
+                       MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
+                       0, 6, BOOKE_PAGESZ_1M, 1),
+       SET_TLB_ENTRY(1, CONFIG_SYS_PMC_BASE, CONFIG_SYS_PMC_BASE_PHYS,
+                       MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
+                       0, 10, BOOKE_PAGESZ_64K, 1),
+#endif /* not SPL */
+
+#ifdef CONFIG_SYS_NAND_BASE
+       /* *I*G - NAND */
+       SET_TLB_ENTRY(1, CONFIG_SYS_NAND_BASE, CONFIG_SYS_NAND_BASE_PHYS,
+                       MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
+                       0, 7, BOOKE_PAGESZ_1M, 1),
+#endif
+
+#if defined(CONFIG_SYS_RAMBOOT) || \
+       (defined(CONFIG_SPL) && !defined(CONFIG_SPL_COMMON_INIT_DDR))
+       /* *I*G - eSDHC/eSPI/NAND boot */
+       SET_TLB_ENTRY(1, CONFIG_SYS_DDR_SDRAM_BASE, CONFIG_SYS_DDR_SDRAM_BASE,
+                       MAS3_SX|MAS3_SW|MAS3_SR, 0,
+                       0, 8, BOOKE_PAGESZ_1G, 1),
+
+#if defined(CONFIG_P1020MBG) || defined(CONFIG_P1020RDB_PD)
+       /* 2G DDR on P1020MBG, map the second 1G */
+       SET_TLB_ENTRY(1, CONFIG_SYS_DDR_SDRAM_BASE + 0x40000000,
+                       CONFIG_SYS_DDR_SDRAM_BASE + 0x40000000,
+                       MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
+                       0, 9, BOOKE_PAGESZ_1G, 1),
+#endif /* P1020MBG */
+#endif /* RAMBOOT/SPL */
+
+#ifdef CONFIG_SYS_INIT_L2_ADDR
+       /* *I*G - L2SRAM */
+       SET_TLB_ENTRY(1, CONFIG_SYS_INIT_L2_ADDR, CONFIG_SYS_INIT_L2_ADDR_PHYS,
+                     MAS3_SX|MAS3_SW|MAS3_SR, MAS2_G,
+                     0, 11, BOOKE_PAGESZ_256K, 1),
+#if CONFIG_SYS_L2_SIZE >= (256 << 10)
+       SET_TLB_ENTRY(1, CONFIG_SYS_INIT_L2_ADDR + 0x40000,
+                     CONFIG_SYS_INIT_L2_ADDR_PHYS + 0x40000,
+                     MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
+                     0, 12, BOOKE_PAGESZ_256K, 1)
+#endif
+#endif
+};
+
+int num_tlb_entries = ARRAY_SIZE(tlb_table);