Add qemu 2.4.0

[kvmfornfv.git] / qemu / roms / u-boot / board / freescale / mx25pdk / imximage.cfg

diff --git a/qemu/roms/u-boot/board/freescale/mx25pdk/imximage.cfg b/qemu/roms/u-boot/board/freescale/mx25pdk/imximage.cfg
new file mode 100644 (file)
index 0000000..3c8d6df
--- /dev/null
+++ b/qemu/roms/u-boot/board/freescale/mx25pdk/imximage.cfg
@@ -0,0 +1,65 @@
+/*
+ * (C) Copyright 2009
+ * Stefano Babic DENX Software Engineering sbabic@denx.de.
+ *
+ * SPDX-License-Identifier:    GPL-2.0+
+ *
+ * Refer doc/README.imximage for more details about how-to configure
+ * and create imximage boot image
+ *
+ * The syntax is taken as close as possible with the kwbimage
+ */
+
+/*
+ * Boot Device : one of
+ * spi, sd (the board has no nand neither onenand)
+ */
+BOOT_FROM      sd
+
+/*
+ * Device Configuration Data (DCD)
+ *
+ * Each entry must have the format:
+ * Addr-type           Address        Value
+ *
+ * where:
+ *     Addr-type register length (1,2 or 4 bytes)
+ *     Address   absolute address of the register
+ *     value     value to be stored in the register
+ */
+/* EIM config-CS5 init -- CPLD */
+DATA 4 0xB8002050 0x0000D843
+DATA 4 0xB8002054 0x22252521
+DATA 4 0xB8002058 0x22220A00
+
+/* DDR2 init */
+DATA 4 0xB8001004 0x0076E83A
+DATA 4 0xB8001010 0x00000204
+DATA 4 0xB8001000 0x92210000
+DATA 4 0x80000f00 0x12344321
+DATA 4 0xB8001000 0xB2210000
+DATA 1 0x82000000 0xda
+DATA 1 0x83000000 0xda
+DATA 1 0x81000400 0xda
+DATA 1 0x80000333 0xda
+
+DATA 4 0xB8001000 0x92210000
+DATA 1 0x80000400 0x12345678
+
+DATA 4 0xB8001000 0xA2210000
+DATA 4 0x80000000 0x87654321
+DATA 4 0x80000000 0x87654321
+
+DATA 4 0xB8001000 0xB2210000
+DATA 1 0x80000233 0xda
+DATA 1 0x81000780 0xda
+DATA 1 0x81000400 0xda
+DATA 4 0xB8001000 0x82216080
+DATA 4 0x43FAC454 0x00001000
+
+DATA 4 0x53F80008 0x20034000
+
+/* Enable the clocks */
+DATA 4 0x53f8000c 0x1fffffff
+DATA 4 0x53f80010 0xffffffff
+DATA 4 0x53f80014 0xfdfff