--- /dev/null
+/*
+ * Copyright 2009-2010 Freescale Semiconductor.
+ *
+ * (C) Copyright 2002 Scott McNutt <smcnutt@artesyncp.com>
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#include <common.h>
+#include <hwconfig.h>
+#include <pci.h>
+#include <asm/processor.h>
+#include <asm/mmu.h>
+#include <asm/cache.h>
+#include <asm/immap_85xx.h>
+#include <asm/fsl_pci.h>
+#include <fsl_ddr_sdram.h>
+#include <asm/fsl_serdes.h>
+#include <asm/io.h>
+#include <spd_sdram.h>
+#include <i2c.h>
+#include <ioports.h>
+#include <libfdt.h>
+#include <fdt_support.h>
+#include <fsl_esdhc.h>
+#include <phy.h>
+
+#include "bcsr.h"
+#if defined(CONFIG_PQ_MDS_PIB)
+#include "../common/pq-mds-pib.h"
+#endif
+
+const qe_iop_conf_t qe_iop_conf_tab[] = {
+ /* QE_MUX_MDC */
+ {2, 31, 1, 0, 1}, /* QE_MUX_MDC */
+
+ /* QE_MUX_MDIO */
+ {2, 30, 3, 0, 2}, /* QE_MUX_MDIO */
+
+#if defined(CONFIG_SYS_UCC_RGMII_MODE)
+ /* UCC_1_RGMII */
+ {2, 11, 2, 0, 1}, /* CLK12 */
+ {0, 0, 1, 0, 3}, /* ENET1_TXD0_SER1_TXD0 */
+ {0, 1, 1, 0, 3}, /* ENET1_TXD1_SER1_TXD1 */
+ {0, 2, 1, 0, 1}, /* ENET1_TXD2_SER1_TXD2 */
+ {0, 3, 1, 0, 2}, /* ENET1_TXD3_SER1_TXD3 */
+ {0, 6, 2, 0, 3}, /* ENET1_RXD0_SER1_RXD0 */
+ {0, 7, 2, 0, 1}, /* ENET1_RXD1_SER1_RXD1 */
+ {0, 8, 2, 0, 2}, /* ENET1_RXD2_SER1_RXD2 */
+ {0, 9, 2, 0, 2}, /* ENET1_RXD3_SER1_RXD3 */
+ {0, 4, 1, 0, 2}, /* ENET1_TX_EN_SER1_RTS_B */
+ {0, 12, 2, 0, 3}, /* ENET1_RX_DV_SER1_CTS_B */
+ {2, 8, 2, 0, 1}, /* ENET1_GRXCLK */
+ {2, 20, 1, 0, 2}, /* ENET1_GTXCLK */
+
+ /* UCC_2_RGMII */
+ {2, 16, 2, 0, 3}, /* CLK17 */
+ {0, 14, 1, 0, 2}, /* ENET2_TXD0_SER2_TXD0 */
+ {0, 15, 1, 0, 2}, /* ENET2_TXD1_SER2_TXD1 */
+ {0, 16, 1, 0, 1}, /* ENET2_TXD2_SER2_TXD2 */
+ {0, 17, 1, 0, 1}, /* ENET2_TXD3_SER2_TXD3 */
+ {0, 20, 2, 0, 2}, /* ENET2_RXD0_SER2_RXD0 */
+ {0, 21, 2, 0, 1}, /* ENET2_RXD1_SER2_RXD1 */
+ {0, 22, 2, 0, 1}, /* ENET2_RXD2_SER2_RXD2 */
+ {0, 23, 2, 0, 1}, /* ENET2_RXD3_SER2_RXD3 */
+ {0, 18, 1, 0, 2}, /* ENET2_TX_EN_SER2_RTS_B */
+ {0, 26, 2, 0, 3}, /* ENET2_RX_DV_SER2_CTS_B */
+ {2, 3, 2, 0, 1}, /* ENET2_GRXCLK */
+ {2, 2, 1, 0, 2}, /* ENET2_GTXCLK */
+
+ /* UCC_3_RGMII */
+ {2, 11, 2, 0, 1}, /* CLK12 */
+ {0, 29, 1, 0, 2}, /* ENET3_TXD0_SER3_TXD0 */
+ {0, 30, 1, 0, 3}, /* ENET3_TXD1_SER3_TXD1 */
+ {0, 31, 1, 0, 2}, /* ENET3_TXD2_SER3_TXD2 */
+ {1, 0, 1, 0, 3}, /* ENET3_TXD3_SER3_TXD3 */
+ {1, 3, 2, 0, 3}, /* ENET3_RXD0_SER3_RXD0 */
+ {1, 4, 2, 0, 1}, /* ENET3_RXD1_SER3_RXD1 */
+ {1, 5, 2, 0, 2}, /* ENET3_RXD2_SER3_RXD2 */
+ {1, 6, 2, 0, 3}, /* ENET3_RXD3_SER3_RXD3 */
+ {1, 1, 1, 0, 1}, /* ENET3_TX_EN_SER3_RTS_B */
+ {1, 9, 2, 0, 3}, /* ENET3_RX_DV_SER3_CTS_B */
+ {2, 9, 2, 0, 2}, /* ENET3_GRXCLK */
+ {2, 25, 1, 0, 2}, /* ENET3_GTXCLK */
+
+ /* UCC_4_RGMII */
+ {2, 16, 2, 0, 3}, /* CLK17 */
+ {1, 12, 1, 0, 2}, /* ENET4_TXD0_SER4_TXD0 */
+ {1, 13, 1, 0, 2}, /* ENET4_TXD1_SER4_TXD1 */
+ {1, 14, 1, 0, 1}, /* ENET4_TXD2_SER4_TXD2 */
+ {1, 15, 1, 0, 2}, /* ENET4_TXD3_SER4_TXD3 */
+ {1, 18, 2, 0, 2}, /* ENET4_RXD0_SER4_RXD0 */
+ {1, 19, 2, 0, 1}, /* ENET4_RXD1_SER4_RXD1 */
+ {1, 20, 2, 0, 1}, /* ENET4_RXD2_SER4_RXD2 */
+ {1, 21, 2, 0, 2}, /* ENET4_RXD3_SER4_RXD3 */
+ {1, 16, 1, 0, 2}, /* ENET4_TX_EN_SER4_RTS_B */
+ {1, 24, 2, 0, 3}, /* ENET4_RX_DV_SER4_CTS_B */
+ {2, 17, 2, 0, 2}, /* ENET4_GRXCLK */
+ {2, 24, 1, 0, 2}, /* ENET4_GTXCLK */
+
+#elif defined(CONFIG_SYS_UCC_RMII_MODE)
+ /* UCC_1_RMII */
+ {2, 15, 2, 0, 1}, /* CLK16 */
+ {0, 0, 1, 0, 3}, /* ENET1_TXD0_SER1_TXD0 */
+ {0, 1, 1, 0, 3}, /* ENET1_TXD1_SER1_TXD1 */
+ {0, 6, 2, 0, 3}, /* ENET1_RXD0_SER1_RXD0 */
+ {0, 7, 2, 0, 1}, /* ENET1_RXD1_SER1_RXD1 */
+ {0, 4, 1, 0, 2}, /* ENET1_TX_EN_SER1_RTS_B */
+ {0, 12, 2, 0, 3}, /* ENET1_RX_DV_SER1_CTS_B */
+
+ /* UCC_2_RMII */
+ {2, 15, 2, 0, 1}, /* CLK16 */
+ {0, 14, 1, 0, 2}, /* ENET2_TXD0_SER2_TXD0 */
+ {0, 15, 1, 0, 2}, /* ENET2_TXD1_SER2_TXD1 */
+ {0, 20, 2, 0, 2}, /* ENET2_RXD0_SER2_RXD0 */
+ {0, 21, 2, 0, 1}, /* ENET2_RXD1_SER2_RXD1 */
+ {0, 18, 1, 0, 2}, /* ENET2_TX_EN_SER2_RTS_B */
+ {0, 26, 2, 0, 3}, /* ENET2_RX_DV_SER2_CTS_B */
+
+ /* UCC_3_RMII */
+ {2, 15, 2, 0, 1}, /* CLK16 */
+ {0, 29, 1, 0, 2}, /* ENET3_TXD0_SER3_TXD0 */
+ {0, 30, 1, 0, 3}, /* ENET3_TXD1_SER3_TXD1 */
+ {1, 3, 2, 0, 3}, /* ENET3_RXD0_SER3_RXD0 */
+ {1, 4, 2, 0, 1}, /* ENET3_RXD1_SER3_RXD1 */
+ {1, 1, 1, 0, 1}, /* ENET3_TX_EN_SER3_RTS_B */
+ {1, 9, 2, 0, 3}, /* ENET3_RX_DV_SER3_CTS_B */
+
+ /* UCC_4_RMII */
+ {2, 15, 2, 0, 1}, /* CLK16 */
+ {1, 12, 1, 0, 2}, /* ENET4_TXD0_SER4_TXD0 */
+ {1, 13, 1, 0, 2}, /* ENET4_TXD1_SER4_TXD1 */
+ {1, 18, 2, 0, 2}, /* ENET4_RXD0_SER4_RXD0 */
+ {1, 19, 2, 0, 1}, /* ENET4_RXD1_SER4_RXD1 */
+ {1, 16, 1, 0, 2}, /* ENET4_TX_EN_SER4_RTS_B */
+ {1, 24, 2, 0, 3}, /* ENET4_RX_DV_SER4_CTS_B */
+#endif
+
+ /* UART1 is muxed with QE PortF bit [9-12].*/
+ {5, 12, 2, 0, 3}, /* UART1_SIN */
+ {5, 9, 1, 0, 3}, /* UART1_SOUT */
+ {5, 10, 2, 0, 3}, /* UART1_CTS_B */
+ {5, 11, 1, 0, 2}, /* UART1_RTS_B */
+
+ /* QE UART */
+ {0, 19, 1, 0, 2}, /* QEUART_TX */
+ {1, 17, 2, 0, 3}, /* QEUART_RX */
+ {0, 25, 1, 0, 1}, /* QEUART_RTS */
+ {1, 23, 2, 0, 1}, /* QEUART_CTS */
+
+ /* QE USB */
+ {5, 3, 1, 0, 1}, /* USB_OE */
+ {5, 4, 1, 0, 2}, /* USB_TP */
+ {5, 5, 1, 0, 2}, /* USB_TN */
+ {5, 6, 2, 0, 2}, /* USB_RP */
+ {5, 7, 2, 0, 1}, /* USB_RX */
+ {5, 8, 2, 0, 1}, /* USB_RN */
+ {2, 4, 2, 0, 2}, /* CLK5 */
+
+ /* SPI Flash, M25P40 */
+ {4, 27, 3, 0, 1}, /* SPI_MOSI */
+ {4, 28, 3, 0, 1}, /* SPI_MISO */
+ {4, 29, 3, 0, 1}, /* SPI_CLK */
+ {4, 30, 1, 0, 0}, /* SPI_SEL, GPIO */
+
+ {0, 0, 0, 0, QE_IOP_TAB_END} /* END of table */
+};
+
+void local_bus_init(void);
+
+int board_early_init_f (void)
+{
+ /*
+ * Initialize local bus.
+ */
+ local_bus_init ();
+
+ enable_8569mds_flash_write();
+
+#ifdef CONFIG_QE
+ enable_8569mds_qe_uec();
+#endif
+
+#if CONFIG_SYS_I2C2_OFFSET
+ /* Enable I2C2 signals instead of SD signals */
+ volatile struct ccsr_gur *gur;
+ gur = (struct ccsr_gur *)(CONFIG_SYS_IMMR + 0xe0000);
+ gur->plppar1 &= ~PLPPAR1_I2C_BIT_MASK;
+ gur->plppar1 |= PLPPAR1_I2C2_VAL;
+ gur->plpdir1 &= ~PLPDIR1_I2C_BIT_MASK;
+ gur->plpdir1 |= PLPDIR1_I2C2_VAL;
+
+ disable_8569mds_brd_eeprom_write_protect();
+#endif
+
+ return 0;
+}
+
+int board_early_init_r(void)
+{
+ const unsigned int flashbase = CONFIG_SYS_NAND_BASE;
+ const u8 flash_esel = 0;
+
+ /*
+ * Remap Boot flash to caching-inhibited
+ * so that flash can be erased properly.
+ */
+
+ /* Flush d-cache and invalidate i-cache of any FLASH data */
+ flush_dcache();
+ invalidate_icache();
+
+ /* invalidate existing TLB entry for flash */
+ disable_tlb(flash_esel);
+
+ set_tlb(1, flashbase, CONFIG_SYS_NAND_BASE, /* tlb, epn, rpn */
+ MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G, /* perms, wimge */
+ 0, flash_esel, /* ts, esel */
+ BOOKE_PAGESZ_64M, 1); /* tsize, iprot */
+
+ return 0;
+}
+
+int checkboard (void)
+{
+ printf ("Board: 8569 MDS\n");
+
+ return 0;
+}
+
+#if !defined(CONFIG_SPD_EEPROM)
+phys_size_t fixed_sdram(void)
+{
+ struct ccsr_ddr __iomem *ddr =
+ (struct ccsr_ddr __iomem *)CONFIG_SYS_FSL_DDR_ADDR;
+ uint d_init;
+
+ out_be32(&ddr->cs0_bnds, CONFIG_SYS_DDR_CS0_BNDS);
+ out_be32(&ddr->cs0_config, CONFIG_SYS_DDR_CS0_CONFIG);
+ out_be32(&ddr->timing_cfg_3, CONFIG_SYS_DDR_TIMING_3);
+ out_be32(&ddr->timing_cfg_0, CONFIG_SYS_DDR_TIMING_0);
+ out_be32(&ddr->timing_cfg_1, CONFIG_SYS_DDR_TIMING_1);
+ out_be32(&ddr->timing_cfg_2, CONFIG_SYS_DDR_TIMING_2);
+ out_be32(&ddr->sdram_cfg, CONFIG_SYS_DDR_SDRAM_CFG);
+ out_be32(&ddr->sdram_cfg_2, CONFIG_SYS_DDR_SDRAM_CFG_2);
+ out_be32(&ddr->sdram_mode, CONFIG_SYS_DDR_SDRAM_MODE);
+ out_be32(&ddr->sdram_mode_2, CONFIG_SYS_DDR_SDRAM_MODE_2);
+ out_be32(&ddr->sdram_interval, CONFIG_SYS_DDR_SDRAM_INTERVAL);
+ out_be32(&ddr->sdram_data_init, CONFIG_SYS_DDR_DATA_INIT);
+ out_be32(&ddr->sdram_clk_cntl, CONFIG_SYS_DDR_SDRAM_CLK_CNTL);
+ out_be32(&ddr->timing_cfg_4, CONFIG_SYS_DDR_TIMING_4);
+ out_be32(&ddr->timing_cfg_5, CONFIG_SYS_DDR_TIMING_5);
+ out_be32(&ddr->ddr_zq_cntl, CONFIG_SYS_DDR_ZQ_CNTL);
+ out_be32(&ddr->ddr_wrlvl_cntl, CONFIG_SYS_DDR_WRLVL_CNTL);
+ out_be32(&ddr->sdram_cfg_2, CONFIG_SYS_DDR_SDRAM_CFG_2);
+#if defined (CONFIG_DDR_ECC)
+ out_be32(&ddr->err_int_en, CONFIG_SYS_DDR_ERR_INT_EN);
+ out_be32(&ddr->err_disable, CONFIG_SYS_DDR_ERR_DIS);
+ out_be32(&ddr->err_sbe, CONFIG_SYS_DDR_SBE);
+#endif
+ udelay(500);
+
+ out_be32(&ddr->sdram_cfg, CONFIG_SYS_DDR_CONTROL);
+#if defined(CONFIG_ECC_INIT_VIA_DDRCONTROLLER)
+ d_init = 1;
+ debug("DDR - 1st controller: memory initializing\n");
+ /*
+ * Poll until memory is initialized.
+ * 512 Meg at 400 might hit this 200 times or so.
+ */
+ while ((ddr->sdram_cfg_2 & (d_init << 4)) != 0) {
+ udelay(1000);
+ }
+ debug("DDR: memory initialized\n\n");
+ udelay(500);
+#endif
+ return CONFIG_SYS_SDRAM_SIZE * 1024 * 1024;
+}
+#endif
+
+/*
+ * Initialize Local Bus
+ */
+void
+local_bus_init(void)
+{
+ volatile ccsr_gur_t *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR);
+ volatile fsl_lbc_t *lbc = LBC_BASE_ADDR;
+
+ uint clkdiv;
+ sys_info_t sysinfo;
+
+ get_sys_info(&sysinfo);
+ clkdiv = (lbc->lcrr & LCRR_CLKDIV) * 2;
+
+ out_be32(&gur->lbiuiplldcr1, 0x00078080);
+ if (clkdiv == 16)
+ out_be32(&gur->lbiuiplldcr0, 0x7c0f1bf0);
+ else if (clkdiv == 8)
+ out_be32(&gur->lbiuiplldcr0, 0x6c0f1bf0);
+ else if (clkdiv == 4)
+ out_be32(&gur->lbiuiplldcr0, 0x5c0f1bf0);
+
+ out_be32(&lbc->lcrr, (u32)in_be32(&lbc->lcrr)| 0x00030000);
+}
+
+static void fdt_board_disable_serial(void *blob, bd_t *bd, const char *alias)
+{
+ const char *status = "disabled";
+ int off;
+ int err;
+
+ off = fdt_path_offset(blob, alias);
+ if (off < 0) {
+ printf("WARNING: could not find %s alias: %s.\n", alias,
+ fdt_strerror(off));
+ return;
+ }
+
+ err = fdt_setprop(blob, off, "status", status, strlen(status) + 1);
+ if (err) {
+ printf("WARNING: could not set status for serial0: %s.\n",
+ fdt_strerror(err));
+ return;
+ }
+}
+
+/*
+ * Because of an erratum in prototype boards it is impossible to use eSDHC
+ * without disabling UART0 (which makes it quite easy to 'brick' the board
+ * by simply issung 'setenv hwconfig esdhc', and not able to interact with
+ * U-Boot anylonger).
+ *
+ * So, but default we assume that the board is a prototype, which is a most
+ * safe assumption. There is no way to determine board revision from a
+ * register, so we use hwconfig.
+ */
+
+static int prototype_board(void)
+{
+ if (hwconfig_subarg("board", "rev", NULL))
+ return hwconfig_subarg_cmp("board", "rev", "prototype");
+ return 1;
+}
+
+static int esdhc_disables_uart0(void)
+{
+ return prototype_board() ||
+ hwconfig_subarg_cmp("esdhc", "mode", "4-bits");
+}
+
+static void fdt_board_fixup_qe_uart(void *blob, bd_t *bd)
+{
+ u8 *bcsr = (u8 *)CONFIG_SYS_BCSR_BASE;
+ const char *devtype = "serial";
+ const char *compat = "ucc_uart";
+ const char *clk = "brg9";
+ u32 portnum = 0;
+ int off = -1;
+
+ if (!hwconfig("qe_uart"))
+ return;
+
+ if (hwconfig("esdhc") && esdhc_disables_uart0()) {
+ printf("QE UART: won't enable with esdhc.\n");
+ return;
+ }
+
+ fdt_board_disable_serial(blob, bd, "serial1");
+
+ while (1) {
+ const u32 *idx;
+ int len;
+
+ off = fdt_node_offset_by_compatible(blob, off, "ucc_geth");
+ if (off < 0) {
+ printf("WARNING: unable to fixup device tree for "
+ "QE UART\n");
+ return;
+ }
+
+ idx = fdt_getprop(blob, off, "cell-index", &len);
+ if (!idx || len != sizeof(*idx) || *idx != fdt32_to_cpu(2))
+ continue;
+ break;
+ }
+
+ fdt_setprop(blob, off, "device_type", devtype, strlen(devtype) + 1);
+ fdt_setprop(blob, off, "compatible", compat, strlen(compat) + 1);
+ fdt_setprop(blob, off, "tx-clock-name", clk, strlen(clk) + 1);
+ fdt_setprop(blob, off, "rx-clock-name", clk, strlen(clk) + 1);
+ fdt_setprop(blob, off, "port-number", &portnum, sizeof(portnum));
+
+ setbits_8(&bcsr[15], BCSR15_QEUART_EN);
+}
+
+#ifdef CONFIG_FSL_ESDHC
+
+int board_mmc_init(bd_t *bd)
+{
+ struct ccsr_gur *gur = (struct ccsr_gur *)CONFIG_SYS_MPC85xx_GUTS_ADDR;
+ u8 *bcsr = (u8 *)CONFIG_SYS_BCSR_BASE;
+ u8 bcsr6 = BCSR6_SD_CARD_1BIT;
+
+ if (!hwconfig("esdhc"))
+ return 0;
+
+ printf("Enabling eSDHC...\n"
+ " For eSDHC to function, I2C2 ");
+ if (esdhc_disables_uart0()) {
+ printf("and UART0 should be disabled.\n");
+ printf(" Redirecting stderr, stdout and stdin to UART1...\n");
+ console_assign(stderr, "eserial1");
+ console_assign(stdout, "eserial1");
+ console_assign(stdin, "eserial1");
+ printf("Switched to UART1 (initial log has been printed to "
+ "UART0).\n");
+
+ clrsetbits_be32(&gur->plppar1, PLPPAR1_UART0_BIT_MASK,
+ PLPPAR1_ESDHC_4BITS_VAL);
+ clrsetbits_be32(&gur->plpdir1, PLPDIR1_UART0_BIT_MASK,
+ PLPDIR1_ESDHC_4BITS_VAL);
+ bcsr6 |= BCSR6_SD_CARD_4BITS;
+ } else {
+ printf("should be disabled.\n");
+ }
+
+ /* Assign I2C2 signals to eSDHC. */
+ clrsetbits_be32(&gur->plppar1, PLPPAR1_I2C_BIT_MASK,
+ PLPPAR1_ESDHC_VAL);
+ clrsetbits_be32(&gur->plpdir1, PLPDIR1_I2C_BIT_MASK,
+ PLPDIR1_ESDHC_VAL);
+
+ /* Mux I2C2 (and optionally UART0) signals to eSDHC. */
+ setbits_8(&bcsr[6], bcsr6);
+
+ return fsl_esdhc_mmc_init(bd);
+}
+
+static void fdt_board_fixup_esdhc(void *blob, bd_t *bd)
+{
+ const char *status = "disabled";
+ int off = -1;
+
+ if (!hwconfig("esdhc"))
+ return;
+
+ if (esdhc_disables_uart0())
+ fdt_board_disable_serial(blob, bd, "serial0");
+
+ while (1) {
+ const u32 *idx;
+ int len;
+
+ off = fdt_node_offset_by_compatible(blob, off, "fsl-i2c");
+ if (off < 0)
+ break;
+
+ idx = fdt_getprop(blob, off, "cell-index", &len);
+ if (!idx || len != sizeof(*idx))
+ continue;
+
+ if (*idx == 1) {
+ fdt_setprop(blob, off, "status", status,
+ strlen(status) + 1);
+ break;
+ }
+ }
+
+ if (hwconfig_subarg_cmp("esdhc", "mode", "4-bits")) {
+ off = fdt_node_offset_by_compatible(blob, -1, "fsl,esdhc");
+ if (off < 0) {
+ printf("WARNING: could not find esdhc node\n");
+ return;
+ }
+ fdt_delprop(blob, off, "sdhci,1-bit-only");
+ }
+}
+#else
+static inline void fdt_board_fixup_esdhc(void *blob, bd_t *bd) {}
+#endif
+
+static void fdt_board_fixup_qe_usb(void *blob, bd_t *bd)
+{
+ u8 *bcsr = (u8 *)CONFIG_SYS_BCSR_BASE;
+
+ if (hwconfig_subarg_cmp("qe_usb", "speed", "low"))
+ clrbits_8(&bcsr[17], BCSR17_nUSBLOWSPD);
+ else
+ setbits_8(&bcsr[17], BCSR17_nUSBLOWSPD);
+
+ if (hwconfig_subarg_cmp("qe_usb", "mode", "peripheral")) {
+ clrbits_8(&bcsr[17], BCSR17_USBVCC);
+ clrbits_8(&bcsr[17], BCSR17_USBMODE);
+ do_fixup_by_compat(blob, "fsl,mpc8569-qe-usb", "mode",
+ "peripheral", sizeof("peripheral"), 1);
+ } else {
+ setbits_8(&bcsr[17], BCSR17_USBVCC);
+ setbits_8(&bcsr[17], BCSR17_USBMODE);
+ }
+
+ clrbits_8(&bcsr[17], BCSR17_nUSBEN);
+}
+
+#ifdef CONFIG_PCI
+void pci_init_board(void)
+{
+#if defined(CONFIG_PQ_MDS_PIB)
+ pib_init();
+#endif
+
+ fsl_pcie_init_board(0);
+}
+#endif /* CONFIG_PCI */
+
+#if defined(CONFIG_OF_BOARD_SETUP)
+void ft_board_setup(void *blob, bd_t *bd)
+{
+#if defined(CONFIG_SYS_UCC_RMII_MODE)
+ int nodeoff, off, err;
+ unsigned int val;
+ const u32 *ph;
+ const u32 *index;
+
+ /* fixup device tree for supporting rmii mode */
+ nodeoff = -1;
+ while ((nodeoff = fdt_node_offset_by_compatible(blob, nodeoff,
+ "ucc_geth")) >= 0) {
+ err = fdt_setprop_string(blob, nodeoff, "tx-clock-name",
+ "clk16");
+ if (err < 0) {
+ printf("WARNING: could not set tx-clock-name %s.\n",
+ fdt_strerror(err));
+ break;
+ }
+
+ err = fdt_fixup_phy_connection(blob, nodeoff,
+ PHY_INTERFACE_MODE_RMII);
+
+ if (err < 0) {
+ printf("WARNING: could not set phy-connection-type "
+ "%s.\n", fdt_strerror(err));
+ break;
+ }
+
+ index = fdt_getprop(blob, nodeoff, "cell-index", 0);
+ if (index == NULL) {
+ printf("WARNING: could not get cell-index of ucc\n");
+ break;
+ }
+
+ ph = fdt_getprop(blob, nodeoff, "phy-handle", 0);
+ if (ph == NULL) {
+ printf("WARNING: could not get phy-handle of ucc\n");
+ break;
+ }
+
+ off = fdt_node_offset_by_phandle(blob, *ph);
+ if (off < 0) {
+ printf("WARNING: could not get phy node %s.\n",
+ fdt_strerror(err));
+ break;
+ }
+
+ val = 0x7 + *index; /* RMII phy address starts from 0x8 */
+
+ err = fdt_setprop(blob, off, "reg", &val, sizeof(u32));
+ if (err < 0) {
+ printf("WARNING: could not set reg for phy-handle "
+ "%s.\n", fdt_strerror(err));
+ break;
+ }
+ }
+#endif
+ ft_cpu_setup(blob, bd);
+
+ FT_FSL_PCI_SETUP;
+
+ fdt_board_fixup_esdhc(blob, bd);
+ fdt_board_fixup_qe_uart(blob, bd);
+ fdt_board_fixup_qe_usb(blob, bd);
+}
+#endif
Code Review / kvmfornfv.git / blobdiff