Add qemu 2.4.0

[kvmfornfv.git] / qemu / roms / u-boot / board / freescale / mpc837xerdb / pci.c

diff --git a/qemu/roms/u-boot/board/freescale/mpc837xerdb/pci.c b/qemu/roms/u-boot/board/freescale/mpc837xerdb/pci.c
new file mode 100644 (file)
index 0000000..8f50c93
--- /dev/null
+++ b/qemu/roms/u-boot/board/freescale/mpc837xerdb/pci.c
@@ -0,0 +1,108 @@
+/*
+ * Copyright (C) 2006-2009 Freescale Semiconductor, Inc.
+ *
+ * SPDX-License-Identifier:    GPL-2.0+
+ */
+
+#include <common.h>
+#include <mpc83xx.h>
+#include <pci.h>
+#include <asm/io.h>
+
+static struct pci_region pci_regions[] = {
+       {
+               bus_start: CONFIG_SYS_PCI_MEM_BASE,
+               phys_start: CONFIG_SYS_PCI_MEM_PHYS,
+               size: CONFIG_SYS_PCI_MEM_SIZE,
+               flags: PCI_REGION_MEM | PCI_REGION_PREFETCH
+       },
+       {
+               bus_start: CONFIG_SYS_PCI_MMIO_BASE,
+               phys_start: CONFIG_SYS_PCI_MMIO_PHYS,
+               size: CONFIG_SYS_PCI_MMIO_SIZE,
+               flags: PCI_REGION_MEM
+       },
+       {
+               bus_start: CONFIG_SYS_PCI_IO_BASE,
+               phys_start: CONFIG_SYS_PCI_IO_PHYS,
+               size: CONFIG_SYS_PCI_IO_SIZE,
+               flags: PCI_REGION_IO
+       }
+};
+
+static struct pci_region pcie_regions_0[] = {
+       {
+               .bus_start = CONFIG_SYS_PCIE1_MEM_BASE,
+               .phys_start = CONFIG_SYS_PCIE1_MEM_PHYS,
+               .size = CONFIG_SYS_PCIE1_MEM_SIZE,
+               .flags = PCI_REGION_MEM,
+       },
+       {
+               .bus_start = CONFIG_SYS_PCIE1_IO_BASE,
+               .phys_start = CONFIG_SYS_PCIE1_IO_PHYS,
+               .size = CONFIG_SYS_PCIE1_IO_SIZE,
+               .flags = PCI_REGION_IO,
+       },
+};
+
+static struct pci_region pcie_regions_1[] = {
+       {
+               .bus_start = CONFIG_SYS_PCIE2_MEM_BASE,
+               .phys_start = CONFIG_SYS_PCIE2_MEM_PHYS,
+               .size = CONFIG_SYS_PCIE2_MEM_SIZE,
+               .flags = PCI_REGION_MEM,
+       },
+       {
+               .bus_start = CONFIG_SYS_PCIE2_IO_BASE,
+               .phys_start = CONFIG_SYS_PCIE2_IO_PHYS,
+               .size = CONFIG_SYS_PCIE2_IO_SIZE,
+               .flags = PCI_REGION_IO,
+       },
+};
+
+void pci_init_board(void)
+{
+       volatile immap_t *immr = (volatile immap_t *)CONFIG_SYS_IMMR;
+       volatile sysconf83xx_t *sysconf = &immr->sysconf;
+       volatile clk83xx_t *clk = (volatile clk83xx_t *)&immr->clk;
+       volatile law83xx_t *pci_law = immr->sysconf.pcilaw;
+       volatile law83xx_t *pcie_law = sysconf->pcielaw;
+       struct pci_region *reg[] = { pci_regions };
+       struct pci_region *pcie_reg[] = { pcie_regions_0, pcie_regions_1, };
+       u32 spridr = in_be32(&immr->sysconf.spridr);
+
+       /* Enable all 5 PCI_CLK_OUTPUTS */
+       clk->occr |= 0xf8000000;
+       udelay(2000);
+
+       /* Configure PCI Local Access Windows */
+       pci_law[0].bar = CONFIG_SYS_PCI_MEM_PHYS & LAWBAR_BAR;
+       pci_law[0].ar = LBLAWAR_EN | LBLAWAR_512MB;
+
+       pci_law[1].bar = CONFIG_SYS_PCI_IO_PHYS & LAWBAR_BAR;
+       pci_law[1].ar = LBLAWAR_EN | LBLAWAR_1MB;
+
+       mpc83xx_pci_init(1, reg);
+
+       /* There is no PEX in MPC8379 parts. */
+       if (PARTID_NO_E(spridr) == SPR_8379)
+               return;
+
+       /* Configure the clock for PCIE controller */
+       clrsetbits_be32(&clk->sccr, SCCR_PCIEXP1CM | SCCR_PCIEXP2CM,
+                                   SCCR_PCIEXP1CM_1 | SCCR_PCIEXP2CM_1);
+
+       /* Deassert the resets in the control register */
+       out_be32(&sysconf->pecr1, 0xE0008000);
+       out_be32(&sysconf->pecr2, 0xE0008000);
+       udelay(2000);
+
+       /* Configure PCI Express Local Access Windows */
+       out_be32(&pcie_law[0].bar, CONFIG_SYS_PCIE1_BASE & LAWBAR_BAR);
+       out_be32(&pcie_law[0].ar, LBLAWAR_EN | LBLAWAR_512MB);
+
+       out_be32(&pcie_law[1].bar, CONFIG_SYS_PCIE2_BASE & LAWBAR_BAR);
+       out_be32(&pcie_law[1].ar, LBLAWAR_EN | LBLAWAR_512MB);
+
+       mpc83xx_pcie_init(2, pcie_reg);
+}