Add qemu 2.4.0

[kvmfornfv.git] / qemu / roms / u-boot / board / freescale / common / qixis.h

diff --git a/qemu/roms/u-boot/board/freescale/common/qixis.h b/qemu/roms/u-boot/board/freescale/common/qixis.h
new file mode 100644 (file)
index 0000000..d8fed14
--- /dev/null
+++ b/qemu/roms/u-boot/board/freescale/common/qixis.h
@@ -0,0 +1,111 @@
+/*
+ * Copyright 2011 Freescale Semiconductor
+ * Author: Shengzhou Liu <Shengzhou.Liu@freescale.com>
+ *
+ * SPDX-License-Identifier:    GPL-2.0+
+ *
+ * This file provides support for the QIXIS of some Freescale reference boards.
+ */
+
+#ifndef __QIXIS_H_
+#define __QIXIS_H_
+
+struct qixis {
+       u8 id;      /* ID value uniquely identifying each QDS board type */
+       u8 arch;    /* Board version information */
+       u8 scver;   /* QIXIS Version Register */
+       u8 model;   /* Information of software programming model version */
+       u8 tagdata;
+       u8 ctl_sys;
+       u8 aux;         /* Auxiliary Register,0x06 */
+       u8 clk_spd;
+       u8 stat_dut;
+       u8 stat_sys;
+       u8 stat_alrm;
+       u8 present;
+       u8 present2;    /* Presence Status Register 2,0x0c */
+       u8 rcw_ctl;
+       u8 ctl_led;
+       u8 i2cblk;
+       u8 rcfg_ctl;    /* Reconfig Control Register,0x10 */
+       u8 rcfg_st;
+       u8 dcm_ad;
+       u8 dcm_da;
+       u8 dcmd;
+       u8 dmsg;
+       u8 gdc;
+       u8 gdd;         /* DCM Debug Data Register,0x17 */
+       u8 dmack;
+       u8 res1[6];
+       u8 watch;       /* Watchdog Register,0x1F */
+       u8 pwr_ctl[2];  /* Power Control Register,0x20 */
+       u8 res2[2];
+       u8 pwr_stat[4]; /* Power Status Register,0x24 */
+       u8 res3[8];
+       u8 clk_spd2[2];  /* SYSCLK clock Speed Register,0x30 */
+       u8 res4[2];
+       u8 sclk[3];  /* Clock Configuration Registers,0x34 */
+       u8 res5;
+       u8 dclk[3];
+       u8 res6;
+       u8 clk_dspd[3];
+       u8 res7;
+       u8 rst_ctl;     /* Reset Control Register,0x40 */
+       u8 rst_stat;    /* Reset Status Register */
+       u8 rst_rsn;     /* Reset Reason Register */
+       u8 rst_frc[2];  /* Reset Force Registers,0x43 */
+       u8 res8[11];
+       u8 brdcfg[16];  /* Board Configuration Register,0x50 */
+       u8 dutcfg[16];
+       u8 rcw_ad[2];   /* RCW SRAM Address Registers,0x70 */
+       u8 rcw_data;
+       u8 res9[5];
+       u8 post_ctl;
+       u8 post_stat;
+       u8 post_dat[2];
+       u8 pi_d[4];
+       u8 gpio_io[4];
+       u8 gpio_dir[4];
+       u8 res10[20];
+       u8 rjtag_ctl;
+       u8 rjtag_dat;
+       u8 res11[2];
+       u8 trig_src[4];
+       u8 trig_dst[4];
+       u8 trig_stat;
+       u8 res12[3];
+       u8 trig_ctr[4];
+       u8 res13[16];
+       u8 clk_freq[6]; /* Clock Measurement Registers */
+       u8 res_c6[8];
+       u8 clk_base[2]; /* Clock Frequency Base Reg */
+       u8 res_d0[8];
+       u8 cms[2];      /* Core Management Space Address Register, 0xD8 */
+       u8 res_c0[6];
+       u8 aux2[4];     /* Auxiliary Registers,0xE0 */
+       u8 res14[10];
+       u8 aux_ad;
+       u8 aux_da;
+       u8 res15[16];
+};
+
+u8 qixis_read(unsigned int reg);
+void qixis_write(unsigned int reg, u8 value);
+u16 qixis_read_minor(void);
+char *qixis_read_time(char *result);
+char *qixis_read_tag(char *buf);
+const char *byte_to_binary_mask(u8 val, u8 mask, char *buf);
+#ifdef CONFIG_SYS_I2C_FPGA_ADDR
+u8 qixis_read_i2c(unsigned int reg);
+void qixis_write_i2c(unsigned int reg, u8 value);
+#endif
+
+#define QIXIS_READ(reg) qixis_read(offsetof(struct qixis, reg))
+#define QIXIS_WRITE(reg, value) qixis_write(offsetof(struct qixis, reg), value)
+#ifdef CONFIG_SYS_I2C_FPGA_ADDR
+#define QIXIS_READ_I2C(reg) qixis_read_i2c(offsetof(struct qixis, reg))
+#define QIXIS_WRITE_I2C(reg, value) \
+                       qixis_write_i2c(offsetof(struct qixis, reg), value)
+#endif
+
+#endif