--- /dev/null
+/*
+ * (C) Copyright 2000
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ *
+ * Modified By Conn Clark to work with Esteem 192E 7/31/00
+ */
+
+#include <common.h>
+#include <mpc8xx.h>
+
+/* ------------------------------------------------------------------------- */
+
+#define _NOT_USED_ 0xFFFFFFFF
+
+const uint sdram_table[] = {
+ /*
+ * Single Read. (Offset 0 in UPMA RAM)
+ *
+ * active, NOP, read, precharge, NOP */
+ 0x0F27CC04, 0x0EAECC04, 0x00B98C04, 0x00F74C00,
+ 0x11FFCC05, /* last */
+ /*
+ * SDRAM Initialization (offset 5 in UPMA RAM)
+ *
+ * This is no UPM entry point. The following definition uses
+ * the remaining space to establish an initialization
+ * sequence, which is executed by a RUN command.
+ * NOP, Program
+ */
+ 0x0F0A8C34, 0x1F354C37, /* last */
+
+ _NOT_USED_, /* Not used */
+
+ /*
+ * Burst Read. (Offset 8 in UPMA RAM)
+ * active, NOP, read, NOP, NOP, NOP, NOP, NOP */
+ 0x0F37CC04, 0x0EFECC04, 0x00FDCC04, 0x00FFCC00,
+ 0x00FFCC00, 0x01FFCC00, 0x0FFFCC00, 0x1FFFCC05, /* last */
+ _NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_,
+ _NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_,
+ /*
+ * Single Write. (Offset 18 in UPMA RAM)
+ * active, NOP, write, NOP, precharge, NOP */
+ 0x0F27CC04, 0x0EAE8C00, 0x01BD4C04, 0x0FFB8C04,
+ 0x0FF74C04, 0x1FFFCC05, /* last */
+ _NOT_USED_, _NOT_USED_,
+ /*
+ * Burst Write. (Offset 20 in UPMA RAM)
+ * active, NOP, write, NOP, NOP, NOP, NOP, NOP */
+ 0x0F37CC04, 0x0EFE8C00, 0x00FD4C00, 0x00FFCC00,
+ 0x00FFCC00, 0x01FFCC04, 0x0FFFCC04, 0x1FFFCC05, /* last */
+ _NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_,
+ _NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_,
+ /*
+ * Refresh (Offset 30 in UPMA RAM)
+ * precharge, NOP, auto_ref, NOP, NOP, NOP */
+ 0x0FF74C34, 0x0FFACCB4, 0x0FF5CC34, 0x0FFFCC34,
+ 0x0FFFCCB4, 0x1FFFCC35, /* last */
+ _NOT_USED_, _NOT_USED_,
+ _NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_,
+ /*
+ * Exception. (Offset 3c in UPMA RAM)
+ */
+ 0x0FFB8C00, 0x1FF74C03, /* last */
+ _NOT_USED_, _NOT_USED_
+};
+
+/* ------------------------------------------------------------------------- */
+
+
+/*
+ * Check Board Identity:
+ */
+
+int checkboard (void)
+{
+ puts ("Board: Esteem 192E\n");
+ return (0);
+}
+
+/* ------------------------------------------------------------------------- */
+
+
+phys_size_t initdram (int board_type)
+{
+ volatile immap_t *immap = (immap_t *) CONFIG_SYS_IMMR;
+ volatile memctl8xx_t *memctl = &immap->im_memctl;
+ long int size_b0, size_b1;
+
+ /*
+ * Explain frequency of refresh here
+ */
+
+ memctl->memc_mptpr = 0x0200; /* divide by 32 */
+
+ memctl->memc_mamr = 0x18003112; /*CONFIG_SYS_MAMR_8COL; */ /* 0x18005112 TODO: explain here */
+
+ upmconfig (UPMA, (uint *) sdram_table,
+ sizeof (sdram_table) / sizeof (uint));
+
+ /*
+ * Map cs 2 and 3 to the SDRAM banks 0 and 1 at
+ * preliminary addresses - these have to be modified after the
+ * SDRAM size has been determined.
+ */
+
+ memctl->memc_or2 = CONFIG_SYS_OR2_PRELIM; /* not defined yet */
+ memctl->memc_br2 = CONFIG_SYS_BR2_PRELIM;
+
+ memctl->memc_or3 = CONFIG_SYS_OR3_PRELIM;
+ memctl->memc_br3 = CONFIG_SYS_BR3_PRELIM;
+
+
+ /* perform SDRAM initializsation sequence */
+ memctl->memc_mar = 0x00000088;
+ memctl->memc_mcr = 0x80004830; /* SDRAM bank 0 execute 8 refresh */
+ memctl->memc_mcr = 0x80004105; /* SDRAM bank 0 */
+
+ memctl->memc_mcr = 0x80006830; /* SDRAM bank 1 execute 8 refresh */
+ memctl->memc_mcr = 0x80006105; /* SDRAM bank 1 */
+
+ memctl->memc_mamr = CONFIG_SYS_MAMR_8COL; /* 0x18803112 start refresh timer TODO: explain here */
+
+/* printf ("banks 0 and 1 are programed\n"); */
+
+ /*
+ * Check Bank 0 Memory Size for re-configuration
+ *
+ */
+ size_b0 = get_ram_size ( (long *)SDRAM_BASE2_PRELIM, SDRAM_MAX_SIZE);
+ size_b1 = get_ram_size ( (long *)SDRAM_BASE3_PRELIM, SDRAM_MAX_SIZE);
+
+ printf ("\nbank 0 size %lu\nbank 1 size %lu\n", size_b0, size_b1);
+
+/* printf ("bank 1 size %u\n",size_b1); */
+
+ if (size_b1 == 0) {
+ /*
+ * Adjust refresh rate if bank 0 isn't stuffed
+ */
+ memctl->memc_mptpr = 0x0400; /* divide by 64 */
+ memctl->memc_br3 &= 0x0FFFFFFFE;
+
+ /*
+ * Adjust OR2 for size of bank 0
+ */
+ memctl->memc_or2 |= 7 * size_b0;
+ } else {
+ if (size_b0 < size_b1) {
+ memctl->memc_br2 &= 0x00007FFE;
+ memctl->memc_br3 &= 0x00007FFF;
+
+ /*
+ * Adjust OR3 for size of bank 1
+ */
+ memctl->memc_or3 |= 15 * size_b1;
+
+ /*
+ * Adjust OR2 for size of bank 0
+ */
+ memctl->memc_or2 |= 15 * size_b0;
+ memctl->memc_br2 += (size_b1 + 1);
+ } else {
+ memctl->memc_br3 &= 0x00007FFE;
+
+ /*
+ * Adjust OR2 for size of bank 0
+ */
+ memctl->memc_or2 |= 15 * size_b0;
+
+ /*
+ * Adjust OR3 for size of bank 1
+ */
+ memctl->memc_or3 |= 15 * size_b1;
+ memctl->memc_br3 += (size_b0 + 1);
+ }
+ }
+
+ /* before leaving set all unused i/o pins to outputs */
+
+ /*
+ * --*Unused Pin List*--
+ *
+ * group/port bit number
+ * IP_B 0,1,3,4,5 Taken care of in pcmcia-cs-x.x.xx
+ * PA 5,7,8,9,14,15
+ * PB 22,23,31
+ * PC 4,5,6,7,10,11,12,13,14,15
+ * PD 5,6,7
+ *
+ */
+
+ /*
+ * --*Pin Used for I/O List*--
+ *
+ * port input bit number output bit number either
+ * PB 18,26,27
+ * PD 3,4 8,9,10,11,12,13,14,15
+ *
+ */
+
+ immap->im_ioport.iop_papar &= ~0x05C3; /* set pins as io */
+ immap->im_ioport.iop_padir |= 0x05C3; /* set pins as output */
+ immap->im_ioport.iop_paodr &= 0x0008; /* config pins 9 & 14 as normal outputs */
+ immap->im_ioport.iop_padat |= 0x05C3; /* set unused pins as high */
+
+ immap->im_cpm.cp_pbpar &= ~0x00001331; /* set unused port b pins as io */
+ immap->im_cpm.cp_pbdir |= 0x00001331; /* set unused port b pins as output */
+ immap->im_cpm.cp_pbodr &= ~0x00001331; /* config bits 18,22,23,26,27 & 31 as normal outputs */
+ immap->im_cpm.cp_pbdat |= 0x00001331; /* set T/E LED, /NV_CS, & /POWER_ADJ_CS and the rest to a high */
+
+ immap->im_ioport.iop_pcpar &= ~0x0F3F; /* set unused port c pins as io */
+ immap->im_ioport.iop_pcdir |= 0x0F3F; /* set unused port c pins as output */
+ immap->im_ioport.iop_pcso &= ~0x0F3F; /* clear special purpose bit for unused port c pins for clarity */
+ immap->im_ioport.iop_pcdat |= 0x0F3F; /* set unused port c pins high */
+
+ immap->im_ioport.iop_pdpar &= 0xE000; /* set pins as io */
+ immap->im_ioport.iop_pddir &= 0xE000; /* set bit 3 & 4 as inputs */
+ immap->im_ioport.iop_pddir |= 0x07FF; /* set bits 5 - 15 as outputs */
+ immap->im_ioport.iop_pddat = 0x0055; /* set alternating pattern on test port */
+
+ return (size_b0 + size_b1);
+}
Code Review / kvmfornfv.git / blobdiff