Add qemu 2.4.0

[kvmfornfv.git] / qemu / roms / u-boot / board / esd / common / xilinx_jtag / ports.c

diff --git a/qemu/roms/u-boot/board/esd/common/xilinx_jtag/ports.c b/qemu/roms/u-boot/board/esd/common/xilinx_jtag/ports.c
new file mode 100644 (file)
index 0000000..d79dbd1
--- /dev/null
+++ b/qemu/roms/u-boot/board/esd/common/xilinx_jtag/ports.c
@@ -0,0 +1,99 @@
+/*
+ * (C) Copyright 2003
+ * Stefan Roese, esd gmbh germany, stefan.roese@esd-electronics.com
+ *
+ * SPDX-License-Identifier:    GPL-2.0+
+ */
+
+/*******************************************************/
+/* file: ports.c                                       */
+/* abstract:  This file contains the routines to       */
+/*            output values on the JTAG ports, to read */
+/*            the TDO bit, and to read a byte of data  */
+/*            from the prom                            */
+/*                                                     */
+/*******************************************************/
+
+#include <common.h>
+#include <asm/processor.h>
+#include <asm/io.h>
+
+#include "ports.h"
+
+static unsigned long output = 0;
+static int filepos = 0;
+static int oldstate = 0;
+static int newstate = 0;
+static int readptr = 0;
+
+extern const unsigned char *xsvfdata;
+
+/* if in debugging mode, then just set the variables */
+void setPort(short p,short val)
+{
+       if (p==TMS) {
+               if (val) {
+                       output |= JTAG_TMS;
+               } else {
+                       output &= ~JTAG_TMS;
+               }
+       }
+       if (p==TDI) {
+               if (val) {
+                       output |= JTAG_TDI;
+               } else {
+                       output &= ~JTAG_TDI;
+               }
+       }
+       if (p==TCK) {
+               if (val) {
+                       output |= JTAG_TCK;
+               } else {
+                       output &= ~JTAG_TCK;
+               }
+               out_be32((void *)GPIO0_OR, output);
+       }
+}
+
+
+/* toggle tck LH */
+void pulseClock(void)
+{
+       setPort(TCK,0);  /* set the TCK port to low  */
+       setPort(TCK,1);  /* set the TCK port to high */
+}
+
+
+/* read in a byte of data from the prom */
+void readByte(unsigned char *data)
+{
+       /* pretend reading using a file */
+       *data = xsvfdata[readptr++];
+       newstate = filepos++ >> 10;
+       if (newstate != oldstate) {
+               printf("%4d kB\r\r\r\r", newstate);
+               oldstate = newstate;
+       }
+}
+
+/* read the TDO bit from port */
+unsigned char readTDOBit(void)
+{
+       unsigned long inputs;
+
+       inputs = in_be32((void *)GPIO0_IR);
+       if (inputs & JTAG_TDO)
+               return 1;
+       else
+               return 0;
+}
+
+
+/* Wait at least the specified number of microsec.                           */
+/* Use a timer if possible; otherwise estimate the number of instructions    */
+/* necessary to be run based on the microcontroller speed.  For this example */
+/* we pulse the TCK port a number of times based on the processor speed.     */
+void waitTime(long microsec)
+{
+       udelay(microsec); /* esd */
+}